A Comparative Study on Stationary-Shoulder and Conventional Friction-Stir-Processed Al-6061 Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04647-7
Abstract: Al-6061 sheets of 3 mm thickness were subjected to stationary-shoulder friction stir processing (S-FSP) and conventional friction stir processing (C-FSP) using similar processing parameters. The results showed that sound C-FSP samples could be obtained by all… read more here.
Keywords: fsp; fsp sample; stationary shoulder; friction stir ... See more keywords
Effect of vibration on machining and mechanical properties of AZ91 alloy during FSP: modeling and experiments
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Material Forming"
DOI: 10.1007/s12289-020-01551-2
Abstract: The objective of the research is to determine the effect of friction stir processing (FSP) parameters and vibration on the machining behavior of AZ91 alloy. The article displays the state of the art of AZ91… read more here.
Keywords: vibration machining; az91 alloy; vibration; effect ... See more keywords
Tunable porous ferric composite for effective removal of phosphate in water
Sign Up to like & getrecommendations! Published in 2019 at "Colloids and Surfaces A: Physicochemical and Engineering Aspects"
DOI: 10.1016/j.colsurfa.2019.123854
Abstract: Abstract A novel strategy to fabricate ferric sponge-like bulk adsorbent (FSP-f) for effective phosphate adsorption and recovery was proposed by anchoring β-FeOOH into the polyacrylamide gel network via a rapid and facile free-radical polymerization. Additionally,… read more here.
Keywords: phosphate; fsp; phosphate adsorption; removal phosphate ... See more keywords
Fabrication of Al-Si/Mg2Si in-situ composite by friction stir processing
Sign Up to like & getrecommendations! Published in 2021 at "Materials Letters"
DOI: 10.1016/j.matlet.2020.128832
Abstract: Abstract Al/Mg2Si in-situ cast composites are very popular in Al casting industries, but they suffer low toughness due to very coarse Mg2Si particles. The friction stir processing (FSP) method can produce composites with very fine… read more here.
Keywords: friction stir; mg2si; fsp; mg2si situ ... See more keywords
Development of surface composite based on Al-Cu system by friction stir processing: Evaluation of microstructure, formation mechanism and wear behavior
Sign Up to like & getrecommendations! Published in 2018 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2018.03.005
Abstract: Abstract In this study, friction stir processing (FSP) was used to fabricate in-situ surface composite based on Al-Cu system on 1060 Al substrate. The effects of the number of FSP passes on phase compositions, microstructure… read more here.
Keywords: mechanism; surface composite; surface; stir ... See more keywords
Effects of pre-aging and minor Sc addition on the microstructure and mechanical properties of friction stir processed 7055 Al alloy
Sign Up to like & getrecommendations! Published in 2018 at "Vacuum"
DOI: 10.1016/j.vacuum.2017.12.030
Abstract: Abstract The effects of Sc addition and pre-aging on the microstructure and mechanical properties of friction stir processed (FSP) 7055 Al alloy were investigated. The addition of Sc effectively inhibited the coarsening of grains in… read more here.
Keywords: 7055 alloy; alloy; addition; pre aging ... See more keywords
INNV-21. IN NEWLY-DIAGNOSED GLIOBLASTOMA, FRAILTY/SARCOPENIA PREDICTS 30D MORBIDITY & 30D, 90D, AND OVERALL MORTALITY AS ACCURATELY AS CURRENT STANDARDS
Sign Up to like & getrecommendations! Published in 2019 at "Neuro-Oncology"
DOI: 10.1093/neuonc/noz175.564
Abstract: Identification of novel prognostic biomarkers for glioblastoma (GBM) could stratify patients between aggressive or palliative treatments. Frailty, as measured by sarcopenia (lack of muscle mass), has been proven to predict survival in cancers. We evaluate… read more here.
Keywords: methodology; surgery; mortality; frailty ... See more keywords
Toward devising pilot experiments to establish parameter window for FSP of aluminum alloys
Sign Up to like & getrecommendations! Published in 2022 at "Advances in Mechanical Engineering"
DOI: 10.1177/16878132221108268
Abstract: One of the major challenges encountered during friction stir processing (FSP) is the establishment of a process parameter window in order to achieve processed surfaces with an acceptable quality as it is an exhaustive task… read more here.
Keywords: parameter window; toward devising; fsp; parameter ... See more keywords
Confirmation of Fusarium root rot resistance QTL Fsp-Ps 2.1 of pea under controlled conditions
Sign Up to like & getrecommendations! Published in 2019 at "BMC Plant Biology"
DOI: 10.1186/s12870-019-1699-9
Abstract: BackgroundDry pea production has increased substantially in North America over the last few decades. With this expansion, significant yield losses have been attributed to an escalation in Fusarium root rots in pea fields. Among the… read more here.
Keywords: qtl; pea; rot; resistance ... See more keywords