Fully 3D Printed and Disposable Paper Supercapacitors.
Sign Up to like & getrecommendations! Published in 2021 at "Advanced materials"
DOI: 10.1002/adma.202101328
Abstract: With the development of the internet-of-things for applications such as wearables and packaging, a new class of electronics is emerging, characterized by the sheer number of forecast units and their short service-life. Projected to reach… read more here.
Keywords: disposable paper; waste; fully printed; performance ... See more keywords
Fully Printed Stretchable and Multifunctional E-Textiles for Aesthetic Wearable Electronic Systems.
Sign Up to like & getrecommendations! Published in 2022 at "Small"
DOI: 10.1002/smll.202107298
Abstract: Electronic textiles (e-textiles) that combine the wearing comfort of textiles and the functionality of soft electronics are highly demanded in wearable applications. However, fabricating robust high-performance stretchable e-textiles with good abrasion resistance and high-resolution aesthetic… read more here.
Keywords: printed stretchable; resistance; fully printed; stretchable multifunctional ... See more keywords
Fully printed 3D cube-shaped multiband fractal rectenna for ambient RF energy harvesting
Sign Up to like & getrecommendations! Published in 2018 at "Nano Energy"
DOI: 10.1016/j.nanoen.2018.09.022
Abstract: Abstract The Internet of Things (IoT) is an emerging paradigm that requires billions of wirelessly connected devices in a complex radio-frequency (RF) environment. With such a huge number of devices in this scenario, recharging or… read more here.
Keywords: energy; fractal rectenna; printed cube; fully printed ... See more keywords
Low loss, fully-printed, ferroelectric varactors for high-power impedance matching at low ISM band frequency
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Microwave and Wireless Technologies"
DOI: 10.1017/s1759078719000643
Abstract: Abstract Low loss, ferroelectric, fully-printed varactors for high-power matching applications are presented. Piezoelectric-induced acoustic resonances reduce the power handling capabilities of these varactors by lowering the Q-factor at the operational frequency of 13.56 MHz. Here,… read more here.
Keywords: high power; low loss; varactors high; power ... See more keywords
Specially Designed Polyaniline/Polypyrrole Ink for a Fully Printed Highly Sensitive pH Microsensor
Sign Up to like & getrecommendations! Published in 2021 at "ACS Applied Materials & Interfaces"
DOI: 10.1021/acsami.1c08043
Abstract: pH sensing for healthcare applications requires sensors with mechanically stable materials of high sensitivity and high reproducibility combined with low-cost fabrication technologies. This work proposes a fully printed pH sensor based on a specially formulated… read more here.
Keywords: ink; specially designed; polypyrrole; highly sensitive ... See more keywords
Fully Printed Optoelectronic Synaptic Transistors Based on Quantum Dot-Metal Oxide Semiconductor Heterojunctions.
Sign Up to like & getrecommendations! Published in 2022 at "ACS nano"
DOI: 10.1021/acsnano.2c00439
Abstract: Optoelectronic synaptic transistors with hybrid heterostructure channels have been extensively developed to construct artificial visual systems, inspired by the human visual system. However, optoelectronic transistors taking full advantages of superior optoelectronic synaptic behaviors, low-cost processes,… read more here.
Keywords: transistors based; optoelectronic synaptic; printed optoelectronic; based quantum ... See more keywords
Fully Printed Sensors for In Situ Temperature, Heat Flow, and Thermal Conductivity Measurements in Flexible Devices
Sign Up to like & getrecommendations! Published in 2023 at "ACS Omega"
DOI: 10.1021/acsomega.2c07590
Abstract: Flexible temperature sensors allow temperature monitoring in wearable healthcare devices. A temperature sensor, which can be printed on flexible substrates, is designed and fabricated using a low-cost silver particle ink and a fast and scalable… read more here.
Keywords: conductivity measurements; temperature; heat; fully printed ... See more keywords
Fully Printed Wearable Microfluidic Devices for High-Throughput Sweat Sampling and Multiplexed Electrochemical Analysis.
Sign Up to like & getrecommendations! Published in 2021 at "ACS sensors"
DOI: 10.1021/acssensors.0c02446
Abstract: Although the recent advancement in wearable biosensors provides continuous, noninvasive assessment of physiologically relevant chemical markers from human sweat, several bottlenecks still exist for its practical use. There were challenges in developing a multiplexed biosensing… read more here.
Keywords: sweat sampling; sweat; fully printed; wearable microfluidic ... See more keywords
Ionic dielectrics for fully printed carbon nanotube transistors: impact of composition and induced stresses.
Sign Up to like & getrecommendations! Published in 2022 at "Nanoscale"
DOI: 10.1039/d2nr04206a
Abstract: Printed carbon nanotube thin-film transistors (CNT-TFTs) are candidates for flexible electronics with printability on a wide range of substrates. Among the layers comprising a CNT-TFT, the gate dielectric has proven most difficult to additively print… read more here.
Keywords: ionic dielectrics; carbon nanotube; printed carbon; fully printed ... See more keywords
Nanoarchitectonics in fully printed perovskite solar cells with carbon-based electrodes.
Sign Up to like & getrecommendations! Published in 2022 at "Nanoscale"
DOI: 10.1039/d2nr05856a
Abstract: A sacrificial film of polystyrene nanoparticles was utilized to introduce nano-cavities into mesoporous metal oxide layers. This enabled the growth of larger perovskite crystals inside the oxide scaffold with significantly suppressed non-radiative recombination and improved… read more here.
Keywords: printed perovskite; cells carbon; solar cells; nanoarchitectonics fully ... See more keywords
A Fully Printed Ultra-Thin Charge Amplifier for On-Skin Biosignal Measurements
Sign Up to like & getrecommendations! Published in 2019 at "IEEE Journal of the Electron Devices Society"
DOI: 10.1109/jeds.2019.2915028
Abstract: In this contribution, we propose a fully printed charge amplifier for on-skin biosignal measurements. The amplifier is fabricated on an ultra-thin parylene substrate and consists of organic transistors, integrated bias and feedback resistors, and a… read more here.
Keywords: amplifier skin; skin biosignal; fully printed; charge amplifier ... See more keywords