Influence of Heat Treatment on Microstructure and Mechanical Properties at Elevated Temperatures of Nonweldable Ni‐Based Alloy Printed by Fused Filament Fabrication
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202500589
Abstract: The microstructure and mechanical properties of printed specimens of nonweldable MAR‐M247 alloy in the sintered state and after different heat treatments are investigated. Specimens are produced using the fused filament fabrication process, which enables the… read more here.
Keywords: mechanical properties; fused filament; heat; fabrication ... See more keywords
Dual material fused filament fabrication of composite core‐shell structures with improved impact resistance and interfacial adhesion
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.55301
Abstract: The mechanical performance of parts produced by fused filament fabrication (FFF) has been limited due to the presence of voids and poor interlayer welding. Recent advancements in FFF have enabled the fabrication of void‐free objects… read more here.
Keywords: fused filament; core; core shell; hdpe ... See more keywords
The influence of in situ microfibrillation on the mechanical properties and warpage of low‐density polyethylene/polystyrene composite prepared by fused filament fabrication
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.55671
Abstract: Fused filament fabrication (FFF) has been widely adopted due to its simplicity and cost‐effectiveness. But until now, its application materials are still limited. Polyolefin material is one of the most commonly used plastics. However, low‐density… read more here.
Keywords: fused filament; filament fabrication; mechanical properties; low density ... See more keywords
Continuous glass fiber‐reinforced polycaprolactone composite produced in a conventional fused filament fabrication equipment: Process modeling and parameters adjustment
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.56090
Abstract: Polymer composites with continuous fibers are expected to exhibit good mechanical performance due to orientation and high aspect ratio of fillers. Fused filament fabrication (FFF) provides an affordable method for processing these materials as products… read more here.
Keywords: fused filament; filament fabrication; continuous glass; glass fiber ... See more keywords
Exploring Process‐Structure–Property Relationships of PEKK and PEEK in Fused Filament Fabrication
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.57347
Abstract: High‐performance polymers (HPP) have gained significant attention in recent years because of their potential for metal replacement in industries with demanding environments, such as aerospace, where high‐strength lightweight parts are essential. A critical area of… read more here.
Keywords: fused filament; filament fabrication; peek; structure ... See more keywords
Analysis of Crystallization Kinetics of PLA Filament for Fused Filament Fabrication
Sign Up to like & getrecommendations! Published in 2025 at "Macromolecular Materials and Engineering"
DOI: 10.1002/mame.202500204
Abstract: This study focuses on characterizing the crystallization kinetics of a PLA 4032D filament, specifically investigating the impact of the extrusion process and different thermal protocols. A principal finding reveals that the PLA filament exhibits a… read more here.
Keywords: fused filament; filament fabrication; crystallization; pla filament ... See more keywords
Recycled milled carbon fibers in fused filament fabrication of composite filaments: Thermophysical analysis and 3D printability assessment for automotive parts manufacturing
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.29909
Abstract: Recycled fibers like glass, carbon, and basalt are increasingly used in 3D‐printed composites due to their high performance and sustainability. This study explores the use of recycled milled carbon fibers (rCFs) as fillers in polyamide‐6,6… read more here.
Keywords: fused filament; carbon; automotive parts; carbon fibers ... See more keywords
AutoML-driven diagnostics of the feeder motor in fused filament fabrication machines from direct current signals
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Intelligent Manufacturing"
DOI: 10.1007/s10845-024-02332-3
Abstract: Part defects in additive manufacturing are more frequent compared to machining or molding. Failures can go unnoticed for hours, wasting resources and extending process cycle times. This paper describes a Machine Learning based method for… read more here.
Keywords: fused filament; filament fabrication; automl driven; machine learning ... See more keywords
Heterophase materials for fused filament fabrication of structural electronics
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-0391-4
Abstract: In this work, new electrically conductive composite filaments are developed for the fabrication of conductive paths, 3D printed with FDM technology. These composite materials consist of electrically conductive copper powder and a polymer matrix. The… read more here.
Keywords: fused filament; fabrication; electronics heterophase; heterophase materials ... See more keywords
Novel Technique Based on Fused Filament Fabrication (FFF) and Robocasting to Create Composite Medical Parts
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Medical Systems"
DOI: 10.1007/s10916-019-1246-0
Abstract: The purpose for this study is to obtain a new composite manufacturing system based on Additive Manufacturing techniques that allows the creation of parts for the medical industry. These pieces will be resistant, lightweight and… read more here.
Keywords: technique; fused filament; fff; manufacturing ... See more keywords
Numerical and experimental analysis of the structural performance of AM components built by fused filament fabrication
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Mechanics and Materials in Design"
DOI: 10.1007/s10999-020-09524-8
Abstract: This work analyses the performance of parts built by Additive Manufacturing (AM) using fused filament fabrication (FFF) demonstrating the correlation between the printing orientation and structural performance. FFF components present two regions showing different mechanical… read more here.
Keywords: structural performance; fused filament; analysis; performance ... See more keywords