Articles with "gfrp" as a keyword



Photo from wikipedia

Effect of ply lay-up and curing pressure on void content in GFRP laminates of unsaturated polyester resin-reinforced woven E-glass fibers

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of Mechanical Science and Technology"

DOI: 10.1007/s12206-017-1120-2

Abstract: This paper describes a laminate curing process by hand lay-up of plain-weave woven Glass fiber-reinforced polymer (GFRP) composite composed of unsaturated polyester resin reinforced with E-glass fiber fabric, EWR-600B. Symmetrical and non-symmetrical ply orientation arrangements… read more here.

Keywords: glass; void content; gfrp; unsaturated polyester ... See more keywords
Photo by marg_cs from unsplash

Evaluation and comparison of GFRP casing and CFRP sheets application on the behavior of circular reinforced concrete column made of high-strength concrete

Sign Up to like & get
recommendations!
Published in 2019 at "Asian Journal of Civil Engineering"

DOI: 10.1007/s42107-019-00172-8

Abstract: This paper presents the results of axial compression testing on reinforced concrete columns (RCC) made with high-strength concrete (HSC) and confined by glass fiber-reinforced plastic (GFRP) casing and carbon fiber-reinforced polymer (CFRP). The major parameters… read more here.

Keywords: column; gfrp; cfrp; compression ... See more keywords
Photo from wikipedia

Flexural performance of hybrid GFRP-Steel reinforced concrete continuous beams

Sign Up to like & get
recommendations!
Published in 2018 at "Composites Part B: Engineering"

DOI: 10.1016/j.compositesb.2018.08.077

Abstract: Abstract This paper presents the experimental results of five large-scale hybrid glass fiber reinforced polymer (GFRP)-steel reinforced concrete continuous beams compared with two concrete continuous beams reinforced with either steel or GFRP bars as reference… read more here.

Keywords: reinforced concrete; gfrp steel; concrete continuous; gfrp ... See more keywords
Photo by peterconlan from unsplash

Cyclic elastic modulus and low cycle fatigue life of woven-type GFRP coated aluminum plates

Sign Up to like & get
recommendations!
Published in 2019 at "Composites Part B: Engineering"

DOI: 10.1016/j.compositesb.2019.107004

Abstract: Abstract In this study, the mechanical properties and low-cycle fatigue behavior of woven-type glass-fiber reinforced plastic (GFRP) coated on one side of an Al 6061 aluminum alloy plate are investigated based on the GFRP layer… read more here.

Keywords: life; gfrp; elastic modulus; fatigue life ... See more keywords
Photo by sharonmccutcheon from unsplash

Tannic acid intermediated surface functionalization of bamboo micron fibers to enhance mechanical performance of hybrid GFRP

Sign Up to like & get
recommendations!
Published in 2019 at "Composites Part B: Engineering"

DOI: 10.1016/j.compositesb.2019.107322

Abstract: Abstract In this study, tannic acid (TA) mediated surface functionalization of bamboo micron fibers (BMFs) was done through a simple green process and subsequently compared with their counterpart based on silane treatment to use them… read more here.

Keywords: gfrp; surface; tannic acid; surface functionalization ... See more keywords
Photo from wikipedia

Aligning carbon nanofibres in glass-fibre/epoxy composites to improve interlaminar toughness and crack-detection capability

Sign Up to like & get
recommendations!
Published in 2017 at "Composites Science and Technology"

DOI: 10.1016/j.compscitech.2017.09.007

Abstract: Abstract An electric field is used to align carbon nanofibres (CNFs) in the matrix of a glass-fibre reinforced-polymer (GFRP) composite to simultaneously improve the (a) delamination toughness, (b) electrical conductivity, and (c) damage-sensing capability. The… read more here.

Keywords: cnfs; gfrp composite; matrix; gfrp ... See more keywords
Photo from wikipedia

Effect of electrical stress on glass fiber reinforced polymer used in high voltage composite insulator under wet environment

Sign Up to like & get
recommendations!
Published in 2018 at "Composites Science and Technology"

DOI: 10.1016/j.compscitech.2017.11.026

Abstract: Abstract The effect of electrical stress on glass fiber reinforced polymer under wet condition has been investigated in the present study. A specially designed and fabricated test setup was used through which the current passing… read more here.

Keywords: effect electrical; stress glass; electrical stress; gfrp ... See more keywords
Photo from archive.org

Effect of SWCNTs and graphene on the fatigue behavior of antisymmetric GFRP laminate

Sign Up to like & get
recommendations!
Published in 2018 at "Composites Science and Technology"

DOI: 10.1016/j.compscitech.2018.07.047

Abstract: Abstract In this relatively unique study, the impact of adding nanoparticles (NPs) on the fatigue properties of antisymmetric glass fiber reinforced polymer (GFRP) laminate has been investigated. Antisymmetric GFRP laminates (+45/02/902/02/-45) were prepared and reinforced… read more here.

Keywords: gfrp laminate; effect swcnts; gfrp; antisymmetric gfrp ... See more keywords
Photo by mykjohnson from unsplash

Optimizing thermographic testing of thick GFRP plates by assessing the real energy absorbed within the material

Sign Up to like & get
recommendations!
Published in 2019 at "Composite Structures"

DOI: 10.1016/j.compstruct.2019.02.027

Abstract: Abstract Active thermography is a well suited non-destructive testing method for the challenging inspection of wind rotor blades. Since the GFRP structures are up to some centimetres thick, long pulse heating is required to provide… read more here.

Keywords: gfrp; thermographic testing; optimizing thermographic; thick gfrp ... See more keywords
Photo from wikipedia

Characterisation of the mechanical behaviour of annealed glass–GFRP hybrid beams

Sign Up to like & get
recommendations!
Published in 2017 at "Construction and Building Materials"

DOI: 10.1016/j.conbuildmat.2017.04.086

Abstract: Abstract This paper presents the results of a combined experimental and numerical investigation on the mechanical behaviour of annealed glass–Glass Fibre Reinforced Polymer (GFRP) hybrid beams. The experimental results showed that an adhesively-bonded GFRP interlayer… read more here.

Keywords: glass; gfrp; annealed glass; mechanical behaviour ... See more keywords
Photo by livvie_bruce from unsplash

Modelling bond of GFRP rebar and concrete

Sign Up to like & get
recommendations!
Published in 2017 at "Construction and Building Materials"

DOI: 10.1016/j.conbuildmat.2017.07.092

Abstract: Abstract The structural performance of concrete structures reinforced using glass-fiber-reinforced-polymer (GFRP) rebars is sometime compromised by debonding failure. For better analyzing the GFRP bar-concrete bond behavior, this study presents two damage-based approaches for assessing the… read more here.

Keywords: bond; gfrp; bond behavior; concrete ... See more keywords