Optimization of tribological behavior of nano clay particle with sisal/jute/glass/epoxy polymer hybrid composites using RSM
Sign Up to like & getrecommendations! Published in 2017 at "Polymers for Advanced Technologies"
DOI: 10.1002/pat.4066
Abstract: The tribological properties are one of the most significant properties in many automobile components such as clutch plate, break shoe, engine liner, piston pin, etc. At present work, attempt on nano clay is loaded with… read more here.
Keywords: nano clay; sisal jute; glass epoxy; optimization tribological ... See more keywords
Effect of Thickness and Denting Behavior of Glass/Epoxy Laminates Subjected to Quasi-Static Indentation (QSI) Loading Under Acoustic Emission Monitoring
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Nondestructive Evaluation"
DOI: 10.1007/s10921-018-0519-8
Abstract: The present work focuses on investigating the effect of laminate thickness on quasi static indentation behavior of glass/epoxy laminates under acoustic emission monitoring. The load bearing and energy absorbing capability of the glass/epoxy samples at… read more here.
Keywords: glass epoxy; glass; indentation; damage ... See more keywords
Ballistic performance of ceramic/composite structures
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.10.042
Abstract: Abstract The aim of this study is to investigate the ballistic behavior of ceramic/composite structures with different thicknesses and different reinforcements, numerically. The guns were shot at four different velocities on composite models using armor-piercing… read more here.
Keywords: aramid epoxy; performance; composite structures; glass epoxy ... See more keywords
FEA simulation and experimental validation of mode I and II delamination at the carbon/glass/epoxy hybrid interface: Physical-based interpretation
Sign Up to like & getrecommendations! Published in 2020 at "Composites Communications"
DOI: 10.1016/j.coco.2020.100532
Abstract: Abstract The aim of this study was to carry out simulations and perform experimental quasi-static delamination tests in modes I and II to characterize the mechanical behavior at a hybrid interface. For that purpose, contact… read more here.
Keywords: delamination; glass epoxy; energy; hybrid interface ... See more keywords
Damage characterization of stiffened glass-epoxy laminates under tensile loading with acoustic emission monitoring
Sign Up to like & getrecommendations! Published in 2018 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2018.04.031
Abstract: Abstract The design of composite components in the aerospace industry often includes structural discontinuities, such as cutouts, for functional requirements like ventilation, tunnel passage, maintenance and repair. The presence of cutout holes leads to complicated… read more here.
Keywords: glass epoxy; acoustic emission; stiffened glass; emission monitoring ... See more keywords
Low cost technique for detecting adhesive debonding damage of glass epoxy composite plate using an impedance based non-destructive testing method
Sign Up to like & getrecommendations! Published in 2018 at "Composite Structures"
DOI: 10.1016/j.compstruct.2018.01.053
Abstract: Abstract In general, components in composite structures are usually achieved with adhesive bonding, a preferred choice over a conventional mechanical fastening approach. For this reason, debonding of an adhesive layer can be a serious problem… read more here.
Keywords: destructive testing; glass epoxy; adhesive debonding; method ... See more keywords
Effect of patch hybridization on the tensile behavior of patch repaired glass/epoxy composite laminates using acoustic emission monitoring
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Adhesion and Adhesives"
DOI: 10.1016/j.ijadhadh.2017.01.014
Abstract: Abstract This paper investigates the tensile response of damaged glass/epoxy composite laminates repaired using hybrid external patches. Hybrid external patches based on glass and Kevlar woven fabrics bonded on both faces of the damaged parent… read more here.
Keywords: glass; patch; glass epoxy; acoustic emission ... See more keywords
Quasi- static indentation properties of damaged glass/epoxy composite laminates repaired by the application of intra-ply hybrid patches
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Testing"
DOI: 10.1016/j.polymertesting.2017.05.014
Abstract: Abstract The main objective of this paper is to investigate the effect of intra-ply hybrid patches based on glass and Kevlar woven fabrics on the local bending response of adhesive bonded external patch repairs in… read more here.
Keywords: glass epoxy; glass; indentation; intra ply ... See more keywords
A novel dynamic constitutive micromechanical model to predict the strain rate dependent mechanical behavior of glass/epoxy laminated composites
Sign Up to like & getrecommendations! Published in 2020 at "Polymer Testing"
DOI: 10.1016/j.polymertesting.2019.106292
Abstract: Abstract In the present research, a novel dynamic constitutive micromechanical (DCM) model was developed to predict the strain rate dependent mechanical behavior of laminated glass/epoxy composites. The present model is an integration of the generalized… read more here.
Keywords: rate dependent; glass epoxy; model; strain rate ... See more keywords
Numerical eigenfrequency and experimental verification of variable cutout (square/rectangular) borne layered glass/epoxy flat/curved panel structure
Sign Up to like & getrecommendations! Published in 2020 at "Mechanics Based Design of Structures and Machines"
DOI: 10.1080/15397734.2020.1759432
Abstract: The variation of modal responses due to the change in shapes (square/rectangular) and sizes of the cutout impregnated composite panels (Glass/Epoxy) are predicted numerically using higher-order fin... read more here.
Keywords: square rectangular; eigenfrequency experimental; numerical eigenfrequency; glass epoxy ... See more keywords
Effect of nanoclay and different impactor shapes on glass/epoxy composites subjected to quasi-static punch shear loading
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Materials and Processing Technologies"
DOI: 10.1080/2374068x.2018.1428879
Abstract: Abstract Penetration resistance is an essential design requirement for fiber reinforced polymer (FRP) composites. Furthermore, the penetration energy of FRP composites is known to be sensitive to the indenter nose shape. This gives a challenge… read more here.
Keywords: indenter; glass epoxy; quasi static; static punch ... See more keywords