Articles with "glass fibers" as a keyword



Photo from academic.microsoft.com

Synergetic reinforcements of epoxy composites with glass fibers and hyperbranched polymers

Sign Up to like & get
recommendations!
Published in 2018 at "Polymer Composites"

DOI: 10.1002/pc.24280

Abstract: Glass fibers (GFs) and hyperbranched polymers with amino terminal groups (HBPA) were introduced into epoxy/polyamide system to fabricate high-performance composites. The impact resistance and mechanical characterization of epoxy/HBPA/GFs composites was performed to investigate the effect… read more here.

Keywords: reinforcements epoxy; composites glass; synergetic reinforcements; hyperbranched polymers ... See more keywords

Surface modification of glass fibers by oxidized plasma coatings to improve interfacial shear strength in GF/polyester composites

Sign Up to like & get
recommendations!
Published in 2019 at "Polymer Composites"

DOI: 10.1002/pc.24573

Abstract: Plasma-polymerized films (interlayers) of tetravinylsilane in mixture with oxygen gas (oxygen fraction 0-0.71) were coated on glass fibers (GF) used as reinforcements in GF/polyester composite. Oxygen atoms of increased concentration (0-18 at.%) were partly incorporated… read more here.

Keywords: plasma coatings; glass fibers; interfacial shear; strength ... See more keywords

Multiscale synergistic reinforcement strategy for ultrahigh specific damping composites via dynamic bonds and glass fibers

Sign Up to like & get
recommendations!
Published in 2025 at "Polymer Composites"

DOI: 10.1002/pc.29891

Abstract: High‐performance damping materials require effective utilization of damping source units and optimized mechanisms to maximize mechanical energy dissipation. In this study, a multiscale synergistic reinforcement strategy is developed to achieve an optimal balance between stiffness… read more here.

Keywords: dynamic bonds; synergistic reinforcement; reinforcement strategy; glass fibers ... See more keywords

Preliminary Experimental Behavior of Bio‐Epoxy Polymer Impregnation on Curaua Fibers Against Glass Fibers

Sign Up to like & get
recommendations!
Published in 2025 at "Polymer Composites"

DOI: 10.1002/pc.70001

Abstract: This preliminary experimental investigation analyzes and compares the impregnation behavior of a bio‐epoxy polymer on curaua (Ananas erectifolius) fibers versus conventional glass fibers under laboratory‐scale conditions. The study explores how distinct fiber characteristics, particularly surface… read more here.

Keywords: preliminary experimental; impregnation; glass fibers; polymer ... See more keywords

A High Efficiency, Low Resistance Antibacterial Filter Formed by Dopamine-Mediated In Situ Deposition of Silver onto Glass Fibers.

Sign Up to like & get
recommendations!
Published in 2024 at "Small"

DOI: 10.1002/smll.202301074

Abstract: The coating of filter media with silver is typically achieved by chemical deposition and aerosol processes. Whilst useful, such approaches struggle to provide uniform coating and are prone to blockage. To address these issues, an… read more here.

Keywords: resistance; silver; situ deposition; dopamine mediated ... See more keywords

CuO coatings on glass fibers: a hybrid material for CO2 adsorption and photocatalytic reduction to solar fuels

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Materials Science: Materials in Electronics"

DOI: 10.1007/s10854-020-03955-x

Abstract: The CO2 capture and its photocatalytic conversion (CCPC) to solar fuels is one promising route to fighting global warming. The CCPC process implies the use of CO2, solar light, and materials to produce solar fuels… read more here.

Keywords: ccpc process; cuo coatings; solar fuels; co2 ... See more keywords

Long term ageing of polyamide 6 and polyamide 6 reinforced with 30% of glass fibers: physicochemical, mechanical and morphological characterization

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of Polymer Research"

DOI: 10.1007/s10965-017-1292-6

Abstract: Hygrothermal ageing of polyamide 6 (PA6) and polyamide 6 reinforced with 30 wt% of glass fibers (PA6GF30) was undertaken. Immersion was conducted in distilled water at 90 °C and 100% relative humidity (RH) for up to 80 days… read more here.

Keywords: reinforced glass; long term; glass; polyamide reinforced ... See more keywords

The Application of Silica and Glass Fibers in Effective Thermoinsulation of Winter Apparels

Sign Up to like & get
recommendations!
Published in 2018 at "Fibers and Polymers"

DOI: 10.1007/s12221-018-7435-5

Abstract: We studied the influence of silica and glass fibers on the properties of polyester non-woven padding, fixing interesting changes in thermoinsulation, thickness and stiffness of obtained composites. It was found that the combination of inorganic… read more here.

Keywords: winter; silica glass; non woven; thermoinsulation ... See more keywords

Investigation on sensing characteristics of fiber Bragg gratings based on soft glass fibers

Sign Up to like & get
recommendations!
Published in 2018 at "Optik"

DOI: 10.1016/j.ijleo.2017.10.154

Abstract: Abstract Soft glass fibers can transmit the wavelengths longer than 2 μm, which can realize the sensors in mid-infrared waveband. Compared to the FBG sensors based on silica fibers, FBG sensors based on soft glass fibers… read more here.

Keywords: fbg based; sensitivity; fiber; soft glass ... See more keywords
Photo from wikipedia

Effect of the chemical composition on the structural and mechanical properties of phosphate glass fibers based on natural phosphate

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2019.152808

Abstract: Abstract New phosphate glass fibers based on natural phosphate and different minerals can be used as formulations of slow-release fertilizers. These fibers were successfully developed by melting the phosphate glass and stretch it into thin… read more here.

Keywords: fibers based; phosphate glass; effect; phosphate ... See more keywords

Applicability of gold tailings, waste limestone, red mud, and ferronickel slag for producing glass fibers

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Cleaner Production"

DOI: 10.1016/j.jclepro.2018.08.230

Abstract: Abstract Increasing concerns about environmental issues have led to more attention being paid to the recycling of mining wastes and smelting byproducts. In the present study, the utilization of gold tailings, waste limestone, red mud,… read more here.

Keywords: tailings waste; limestone red; glass; gold tailings ... See more keywords