Effect of the Time and Temperature of Isothermal Quenching on Microstructure and Mechanical Properties of Bainitic Gray Cast Iron
Sign Up to like & getrecommendations! Published in 2020 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-020-00460-0
Abstract: Mechanical properties of copper-alloyed bainitic gray cast iron are studied after isothermal quenching for bainite at different temperatures and holds. The microstructure of the iron is determined by optical and scanning electron microscopy and x-ray… read more here.
Keywords: gray cast; mechanical properties; cast iron; iron ... See more keywords
An investigation of abrasive wear and corrosion behavior of surface repair of gray cast iron by SMAW
Sign Up to like & getrecommendations! Published in 2017 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2016.09.003
Abstract: Abstract In this work, improving the abrasion–corrosion behavior of gray cast iron used in centrifugal pumps was studied. These pumps are usually made of gray cast iron (BS:1452Gr220) and are repaired by Shielded Metal Arc… read more here.
Keywords: gray cast; corrosion; corrosion behavior; cast iron ... See more keywords
Effects of quench-tempering and laser hardening treatment on wear resistance of gray cast iron
Sign Up to like & getrecommendations! Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2020.05.006
Abstract: Abstract The present research studied the combined effects of quench-tempering and laser surface hardening treatments on wear behavior of gray cast iron, and compared results with conventional austempered gray cast iron. Four tempering temperatures of… read more here.
Keywords: gray cast; treatment; laser; cast iron ... See more keywords
Microstructure and properties of NiCrBSi coating by plasma cladding on gray cast iron
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2018.12.055
Abstract: Abstract Plasma cladding has been widely applied in surface modification and repairing. In this study, the NiCrBSi coating was prepared on gray cast iron by plasma cladding. Scanning electron microscopy (SEM), energy dispersive microanalysis (EDS),… read more here.
Keywords: microstructure; plasma cladding; cast iron; gray cast ... See more keywords
Analysis Microstructural on Gray Cast Iron Boriding and Hydrogen of Permeation
Sign Up to like & getrecommendations! Published in 2019 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927619008742
Abstract: The need nuclear engineering is to improve the characteristics of ferrous and non-ferrous materials by innovation of layers resistant to hydrogen irradiation, permeation and embrittlement [1-2]. Also the need for resistant layers with the interaction… read more here.
Keywords: permeation; microstructural gray; hydrogen; engineering ... See more keywords
Graphene Coating via Chemical Vapor Deposition for Improving Friction and Wear of Gray Cast Iron at Interfaces.
Sign Up to like & getrecommendations! Published in 2017 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.7b07922
Abstract: This study reports the influence of CVD-graphene on the tribological performance of gray cast iron (GCI) from the internal combustion engine (ICE) cylinder liners by performing a ball-on-disk friction tests. The graphene-coated specimen exhibited a… read more here.
Keywords: gray cast; friction; cast iron; iron ... See more keywords
Influence of Microscopic Effects on the Static Tensile Strength of Gray Cast Iron HT200 Specimens
Sign Up to like & getrecommendations! Published in 2021 at "Advances in Materials Science and Engineering"
DOI: 10.1155/2021/6629413
Abstract: Gray cast iron HT200 material is a kind of pearlitic gray cast iron. Flake graphite in the gray cast iron greatly destroys the integrity of the matrix and affect the static strength. The influence of… read more here.
Keywords: gray cast; strength; iron ht200; cast iron ... See more keywords
On the Microstructure, Microhardnessand Wear Behavior of Gray Cast Iron Surface Layer after Laser Strengthening
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15031075
Abstract: Cast iron is one of the most common structural materials and is widely used in mechanical engineering production. Taking into account its rather low mechanical properties, different technologies are currently used in industry, among other… read more here.
Keywords: iron; cast iron; laser strengthening; surface ... See more keywords