Functionally Gradient H13 Tool Steel/Oxygen‐Free High Thermal Conductivity Cu Composites Manufactured by Laser‐Directed Energy Deposition
Sign Up to like & getrecommendations! Published in 2024 at "steel research international"
DOI: 10.1002/srin.202400190
Abstract: H13 tool steel and copper (Cu) functionally gradient materials (FGMs) have been manufactured using laser‐directed energy deposition (L‐DED). Differential scanning calorimetry analysis of H13‐Cu blends shows clear separation of the Fe‐rich and Cu‐rich liquids due… read more here.
Keywords: h13 tool; tool steel; steel; laser directed ... See more keywords
A Hybrid Plasma Treatment of H13 Tool Steel by Combining Plasma Nitriding and Post-Oxidation
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3669-z
Abstract: Pulsed plasma nitriding and post-oxidizing process have been applied to hot work H13 tool steel to enhance the tribological properties (friction coefficient and wear rate). Nitriding was accomplished under specific conditions to generate a free… read more here.
Keywords: h13 tool; treatment; plasma nitriding; tool steel ... See more keywords
On the influence of laser cladding parameters and number of deposited layers on as-built and machined AISI H13 tool steel multilayered claddings
Sign Up to like & getrecommendations! Published in 2021 at "Cirp Journal of Manufacturing Science and Technology"
DOI: 10.1016/j.cirpj.2021.07.003
Abstract: Abstract Laser cladding followed by machining is nowadays a process chain widely utilized in the metal manufacturing industry for restoration of high-value components and optimization of the mechanical and corrosion properties of poorly performant alloys.… read more here.
Keywords: steel; number; aisi h13; h13 tool ... See more keywords
Modeling creep-fatigue interaction damage and H13 tool steel material response for rolling die under hot milling
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Fracture Mechanics"
DOI: 10.1016/j.engfracmech.2019.106770
Abstract: Abstract In hot milling process, rolling die is subjected to nonsteady conditions which can raise the combinations of fatigue and creep damage mechanism. Creep-fatigue interaction at elevated temperatures is complex research topic; as a result,… read more here.
Keywords: creep fatigue; fatigue interaction; rolling die; h13 tool ... See more keywords
Correlation between pulsed laser parameters and MC carbide morphology in H13 tool steel/TiC composite coating
Sign Up to like & getrecommendations! Published in 2020 at "Optics and Laser Technology"
DOI: 10.1016/j.optlastec.2020.106120
Abstract: Abstract In this study, composite coatings were fabricated by preplacing a TiC layer on H13 tool steel and surface melting with a pulsed Nd: YAG laser. Since the morphology of hard phase particles is one… read more here.
Keywords: morphology; composite coating; tool steel; h13 tool ... See more keywords
Effect of compound layer on the corrosion behavior of plasma nitrided AISI H13 tool steel
Sign Up to like & getrecommendations! Published in 2019 at "Materials Research Express"
DOI: 10.1088/2053-1591/ab02c1
Abstract: In this study, plasma nitriding process was carried out on a H13 tool steel for a duration of 12 h at 510 °C in an atmosphere of 75% nitrogen and 25% hydrogen gas. X-ray diffraction… read more here.
Keywords: steel; corrosion behavior; tool steel; h13 tool ... See more keywords
Surface alloying of H13 tool steel by Al 2 CrFeCoCuTiNi 2 high-entropy alloy using tungsten-inert gas process under various substrate initial temperatures
Sign Up to like & getrecommendations! Published in 2025 at "Materials Science and Technology"
DOI: 10.1177/02670836251323429
Abstract: Surface alloying of H13 tool steel was carried out using a tungsten-inert gas process and Al 2 CrCoCuTiNi 2 high-entropy alloy filler metal under various substrate initial temperatures. The filler metal showed the segregation of… read more here.
Keywords: h13 tool; alloying h13; tool steel; tungsten inert ... See more keywords
Influence of Tempering Temperature and Time on Microstructure and Mechanical Properties of Additively Manufactured H13 Tool Steel
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15238329
Abstract: Among various processes for manufacturing complex-shaped metal parts, additive manufacturing is highlighted as a process capable of reducing the wastage of materials without requiring a post-process, such as machining and finishing. In particular, it is… read more here.
Keywords: mechanical properties; tempering temperature; tool steel; h13 tool ... See more keywords
Novel Pectin Binder for Satelliting Carbides to H13 Tool Steel for PBF-LB Processing
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16103649
Abstract: In order to enhance the range of processable alloys of laser-based powder bed fusion, reinforced alloys have gained focus. Satelliting is a recently introduced method for adding fine additives to larger parent powder particles using… read more here.
Keywords: binder satelliting; h13 tool; tool steel; binder ... See more keywords
The Effect of In Situ Heat Treatment on the Microstructure and Mechanical Properties of H13 Tool Steel Specimens Produced by Laser-Engineered Net Shaping (LENS®)
Sign Up to like & getrecommendations! Published in 2025 at "Materials"
DOI: 10.3390/ma18225164
Abstract: Samples of H13 tool steel were produced using the LENS® laser additive manufacturing technique. Three variants of samples were produced such that during and 2 h after deposition, both the substrate and sample temperatures were… read more here.
Keywords: mechanical properties; microstructure mechanical; h13 tool; tool steel ... See more keywords