High-temperature oxidation behaviour of additively manufactured and wrought HAYNES 282
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Materials Science"
DOI: 10.1007/s10853-024-10207-4
Abstract: Direct Metal Laser Sintered Haynes 282 specimens as well as wrought ones were subjected to high-temperature exposure at 1000 °C for 100h in air to compare their oxidation behaviour. The specimens were removed from the… read more here.
Keywords: haynes 282; oxidation; oxidation behaviour; high temperature ... See more keywords
Microstructure and Hardness Evolution in Haynes 282 Nickel-Based Superalloy During Multi-variant Aging Heat Treatment
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-3886-0
Abstract: In this paper, the effect of applied multi-variant heat treatment on microstructure, phase composition and mechanical response of Haynes 282 nickel-based superalloy was investigated. For this reason, temperatures of both stages of standard two-stage aging… read more here.
Keywords: 282 nickel; heat; treatment; heat treatment ... See more keywords
Process parameters optimization for Haynes 282 fabricated by pulsed wave laser powder bed fusion
Sign Up to like & getrecommendations! Published in 2025 at "Progress in Additive Manufacturing"
DOI: 10.1007/s40964-025-01134-0
Abstract: Nickel-based Haynes 282 superalloy is attracting more and more attentions for additively manufactured heat exchangers in the aerospace industry. Additively manufactured Haynes 282 has been investigated recently, but the systematic investigation of pulsed wave laser… read more here.
Keywords: laser; haynes 282; powder bed; pulsed wave ... See more keywords
Aging heat treatment design for Haynes 282 made by wire-feed additive manufacturing using high-throughput experiments and interpretable machine learning
Sign Up to like & getrecommendations! Published in 2024 at "Science and Technology of Advanced Materials"
DOI: 10.1080/14686996.2024.2346067
Abstract: ABSTRACT Wire-feed additive manufacturing (WFAM) produces superalloys with complex thermal cycles and unique microstructures, often requiring optimized heat treatments. To address this challenge, we present a hybrid approach that combines high-throughput experiments, precipitation simulation, and… read more here.
Keywords: heat; haynes 282; heat treatment; machine learning ... See more keywords
Microstructural Evolution of Large Cast Haynes 282 at Elevated Temperature
Sign Up to like & getrecommendations! Published in 2021 at "Crystals"
DOI: 10.3390/cryst11080867
Abstract: Haynes 282 has attracted attention for casting applications in AUSC power plants due to its good creep properties. However, the market is primarily comprised of wrought Haynes 282, while the cast version is not commercially… read more here.
Keywords: evolution large; microstructural evolution; cast haynes; large cast ... See more keywords
The Impact of Plastic Deformation on the Microstructure and Tensile Strength of Haynes 282 Nickel Superalloy Produced by DMLS and Casting
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15217545
Abstract: The article presents the results of research on the influence of plastic deformation on the microstructure and tensile strength of Haynes 282 nickel superalloy produced by direct metal laser sintering (DMLS) and a conventional technique… read more here.
Keywords: strength; tensile strength; haynes 282; plastic deformation ... See more keywords