Experimental and numerical study on HDPE/SWCNT nanocomposite elastic properties considering the processing techniques effect
Sign Up to like & getrecommendations! Published in 2020 at "Microsystem Technologies"
DOI: 10.1007/s00542-020-04784-y
Abstract: The aim of this study is to evaluate the elastic properties of high-density polyethylene (HDPE) using single-walled carbon nanotubes (SWCNTs) reinforcements with experimental and Finite element method (FEM) considering two different processing techniques effect. SWCNT… read more here.
Keywords: hdpe; techniques effect; study; hdpe swcnt ... See more keywords
Effect of surface treatment on hair fiber as reinforcement of HDPE composites: Mechanical properties and water absorption kinetics
Sign Up to like & getrecommendations! Published in 2018 at "Korean Journal of Chemical Engineering"
DOI: 10.1007/s11814-018-0011-2
Abstract: The objective of this work was to investigate the effect of surface improvement on human hair fiber (HF) based high-density polyethylene (HDPE) reinforced polymer composites. A universal testing machine was used for the characterization of… read more here.
Keywords: treatment; hdpe; hdpe composites; hair fiber ... See more keywords
Modified high-density polyethylene films: preparation, composition and their physical properties
Sign Up to like & getrecommendations! Published in 2020 at "Bulletin of Materials Science"
DOI: 10.1007/s12034-020-02167-7
Abstract: To prepare high-density polyethylene (HDPE) films with excellent mechanical properties and lower haze, HDPE was modified by using linear low-density polyethylene (LLDPE) and polypropylene (PP), and their characterizations were performed by melt index, light transmittance/haze,… read more here.
Keywords: high density; density polyethylene; hdpe; density ... See more keywords
Analysis on Automobile HDPE Fuel Tank Crashworthiness with Respect to Environmental Temperature
Sign Up to like & getrecommendations! Published in 2018 at "Arabian Journal for Science and Engineering"
DOI: 10.1007/s13369-017-2878-3
Abstract: Polymer fuel tanks with multilayered high-density polyethylene (HDPE) have been utilized extensively in vehicles. However, the temperature-dependent properties affect their usage life and crashworthiness, which need to be predicted and evaluated quantitatively before manufacture. In… read more here.
Keywords: temperature; hdpe; fuel tank; fuel ... See more keywords
Thermogravimetric characteristic and kinetic of catalytic co-pyrolysis of biomass with low- and high-density polyethylenes
Sign Up to like & getrecommendations! Published in 2018 at "Biomass Conversion and Biorefinery"
DOI: 10.1007/s13399-017-0261-y
Abstract: The pyrolysis of wood fuel (WF) and polyethylenes (low-density polyethylene; LDPE and high-density polyethylene; HDPE) in a non-catalytic and catalytic co-pyrolysis over zeolite catalyst (ZSM-5) were studied via a thermogravimetric analysis. The result obtained for… read more here.
Keywords: pyrolysis; biomass; hdpe; catalytic pyrolysis ... See more keywords
Polyolefin-functionalized graphene oxide and its GO/HDPE nanocomposite with excellent mechanical properties
Sign Up to like & getrecommendations! Published in 2018 at "Chinese Chemical Letters"
DOI: 10.1016/j.cclet.2017.06.001
Abstract: Abstract To prepare GO/Polyolefin nanocomposites with enhanced mechanical, electrical, or thermal properties is still a challenge due to the poor interfacial adhesion between GO and non-polar polyolefins. In this study, we report an effective strategy… read more here.
Keywords: graphene oxide; functionalized graphene; hdpe; hdpe mah ... See more keywords
Investigation of the solvent debinding in the injection molding of ZrO2 ceramics using LDEP, HDPE and wax binders
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.11.062
Abstract: Abstract In this paper, zirconia green parts with the binder system containing low density polyethylene (LDPE) were prepared by injection molding. The green parts after solvent and thermal debinding were sintered at 1500 °C for 2 h.… read more here.
Keywords: injection molding; wax binders; solvent debinding; hdpe ... See more keywords
Largely enhanced thermal conductivity of HDPE/boron nitride/carbon nanotubes ternary composites via filler network-network synergy and orientation
Sign Up to like & getrecommendations! Published in 2018 at "Composites Part A: Applied Science and Manufacturing"
DOI: 10.1016/j.compositesa.2018.05.016
Abstract: Abstract In recent years, hybrid fillers with different dimension are frequently used to improve the thermal conductivity of polymer/filler composites. While the combined effect of hybrid filler and orientation on the thermal conductivity of polymer/filler… read more here.
Keywords: network; hdpe; thermal conductivity; conductivity ... See more keywords
A proposal of a new material for greenhouses on the basis of numerical, optical, thermal and mechanical approaches
Sign Up to like & getrecommendations! Published in 2017 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2017.08.071
Abstract: Abstract The use of recycled paper in HDPE (High Density PolyEthylene) matrix composites has recently been introduced as an interesting alternative to traditional recycling process for paper. HDPE is also used as double wall greenhouse… read more here.
Keywords: new material; pure hdpe; proposal new; hdpe ... See more keywords
Influence of amine and vinyl functional groups of silanes on total performance of thermoplastic-based composites
Sign Up to like & getrecommendations! Published in 2018 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2018.03.235
Abstract: Abstract The influence of amine (polar) and vinyl (nonpolar) functionalized organosilanes were investigated on the total performance of neat high-density polyethylene (HDPE) and wood-HDPE composites. Thus, micro-size silicate-based mineral fillers were treated with 3 mass%… read more here.
Keywords: total performance; hdpe; amine vinyl; vinyl ... See more keywords
The enhancement of the flame retardance of bamboo fibre/HDPE composites: Cerium doped H2Ti2O5·H2O nanotubes effects
Sign Up to like & getrecommendations! Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.01.029
Abstract: Abstract In this study, H2Ti2O5·H2O nanotubes (TNTs) and Ce-doped titanate nanotubes (Ce-TNTs) were synthesised via hydro-thermal synthesis and incorporated into bamboo fibre/high-density polyethylene (HDPE) (BH) composites to enhance the flame retardance of these composites. Transmission… read more here.
Keywords: fibre hdpe; bamboo fibre; flame retardance; hdpe composites ... See more keywords