The influence of large-scale factors on the heat load on human beings in Poland in the summer months
Sign Up to like & getrecommendations! Published in 2018 at "Theoretical and Applied Climatology"
DOI: 10.1007/s00704-018-2633-z
Abstract: The aim of the research was to identify connections between the occurrence of heat load across Poland and large-scale factors, which will allow statistical models to be derived that are useful to describe bioclimatic conditions… read more here.
Keywords: large scale; heat load; summer months; scale factors ... See more keywords
A generally applicable, simple and adaptive forecasting method for the short-term heat load of consumers
Sign Up to like & getrecommendations! Published in 2019 at "Applied Energy"
DOI: 10.1016/j.apenergy.2019.03.012
Abstract: Abstract Energy management systems aiming for an efficient operation of hybrid energy systems with a high share of different renewable energy sources strongly benefit from short-term forecasts for the heat-load. The forecasting methods available in… read more here.
Keywords: energy; forecasting method; heat load;
An improved constrained inverse optimization method for mechanical draft cooling towers
Sign Up to like & getrecommendations! Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2016.12.002
Abstract: Abstract In this work, a constrained multiple parameter inverse identification technique is proposed for a mechanical cooling tower to meet a required heat rejection rate from hot water and also ensuring minimum power consumption. The… read more here.
Keywords: technique; retrieval; heat load; constrained inverse ... See more keywords
Operational characteristics of loop heat pipes with porous copper fiber sintered sheet as wick
Sign Up to like & getrecommendations! Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2017.03.120
Abstract: Abstract Porous copper fiber sintered sheets (PCFSS) as wick are fabricated for loop heat pipes (LHP) using low-temperature solid-phase sintering technology and smooth and rough copper fiber as the manufacturing material. The operational characteristics of… read more here.
Keywords: heat; heat load; operational characteristics; copper fiber ... See more keywords
Dynamic control of microchannel cooling system with unanticipated evaporator heat loads
Sign Up to like & getrecommendations! Published in 2021 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2020.116225
Abstract: Abstract This study presents a control strategy for electronic cooling systems incorporating microchannel evaporators that experience unanticipated and significant heat load variations. It complements prior studies that focus primarily on the steady operation of two-phase… read more here.
Keywords: heat loads; system; evaporator heat; heat load ... See more keywords
Design, modification and test of the conduction cooled high-current current leads for the superconducting magnet
Sign Up to like & getrecommendations! Published in 2017 at "Cryogenics"
DOI: 10.1016/j.cryogenics.2017.07.006
Abstract: Abstract Conduction cooled current leads, which bring the current from the room temperature terminal down to the cryogenic environment, were used in common recently in large scale superconducting accelerators for its low cost, sample design… read more here.
Keywords: current lead; heat load; test; design ... See more keywords
The multiple linear regression models of heat load for air-conditioned room
Sign Up to like & getrecommendations! Published in 2020 at "Energy Reports"
DOI: 10.1016/j.egyr.2020.11.090
Abstract: Abstract This study developed a heat load model of an air-conditioned room using multiple linear regression. A sensitivity analysis was first used to simplify the heat load model by neglecting the less sensitive levels of… read more here.
Keywords: regression; heat load; conditioned room; air conditioned ... See more keywords
A self-regulating multi-torus magneto-fluidic device for kilowatt level cooling
Sign Up to like & getrecommendations! Published in 2019 at "Energy Conversion and Management"
DOI: 10.1016/j.enconman.2019.111819
Abstract: Abstract Efficiently removing waste heat by novel cooling devices can reduce material failure and enhance service life. Magneto-fluidic cooling, which is based on the thermomagnetic convection of a ferrofluid, offers a passive, self-regulating approach for… read more here.
Keywords: heat; self regulating; kilowatt level; multi torus ... See more keywords
Regulation of gas-liquid stratified flow boiling dynamic instabilities in horizontal tube: Effects of heat load distribution and wall thermal capacity
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Heat and Mass Transfer"
DOI: 10.1016/j.ijheatmasstransfer.2018.07.083
Abstract: Abstract In this work, an experimental investigation on the regulation of gas-liquid stratified flow boiling dynamic instabilities was carried out in a 1530 mm long horizontal arranged copper tube with an inner diameter of 12 mm. Two… read more here.
Keywords: gas liquid; flow boiling; heat load; stratified flow ... See more keywords
Development of a loop heat pipe with the 3D printed stainless steel wick in the application of thermal management
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Heat and Mass Transfer"
DOI: 10.1016/j.ijheatmasstransfer.2020.120258
Abstract: Abstract The 3D printed wicks, whose structural parameters could be controlled by changing the distance between neighboring structural cylinders, were manufactured to experimentally investigate the effect of pore size (d) on the heat performance of… read more here.
Keywords: heat pipe; heat load; stainless steel; heat ... See more keywords
Critical THI thresholds based on the physiological parameters of lactating dairy cows.
Sign Up to like & getrecommendations! Published in 2020 at "Journal of thermal biology"
DOI: 10.1016/j.jtherbio.2020.102523
Abstract: The severity of heat stress conditions in high-yielding dairy cows is currently underestimated. The present study aimed to determine the heat load threshold of the temperature-humidity index (THI) on physiological parameters of lactating Holstein-Friesian cows… read more here.
Keywords: heat; heat load; dairy cows; physiological parameters ... See more keywords