Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Fire and Materials"
DOI: 10.1002/fam.2452
Abstract: Summary Phosphorus-containing epoxides were used to generate several oligomeric polyether diols, which were in turn utilized in the preparation of model polyurethane (PU) samples, either as comonomers in the polymerization (Prep samples) or solvent blended…
read more here.
Keywords:
new polyether;
release reduction;
diols flame;
polyether diols ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Fire and Materials"
DOI: 10.1002/fam.2693
Abstract: The heat release rate (HRR) of fuels has been described as the single important variable of fuels in fire hazard, and the HRR experimental measurement remains a key issue in fire science. A modified carbon‐dioxide…
read more here.
Keywords:
model;
heat release;
fire;
release rate ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Flow, Turbulence and Combustion"
DOI: 10.1007/s10494-018-9937-z
Abstract: In this work, we investigate numerically the temporal evolution of Turbulent Kinetic Energy (TKE) of a chemically-reacting n-heptane and air mixture in statistically Homogeneous Isotropic Turbulence (HIT). Our specific focus is on the concurrent view…
read more here.
Keywords:
kinetic energy;
energy;
dilatation;
turbulence ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2018 at "Journal of Nondestructive Evaluation"
DOI: 10.1007/s10921-018-0482-4
Abstract: Deformation of steel parts is accompanied by either heating or cooling of particular zones depending on deformation mechanism. The use of infrared thermographic equipment allows analyzing spatial/temporal temperature distributions on the surface of steel parts…
read more here.
Keywords:
release caused;
deformation;
heat release;
steel ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Journal of Thermal Analysis and Calorimetry"
DOI: 10.1007/s10973-017-6776-4
Abstract: Total heat release of a polymer is the heat of complete combustion of the pyrolysis gases per unit its initial mass. Microscale combustion calorimetry, an oxygen consumption technique, identifies the total heat release of polymers…
read more here.
Keywords:
combustion;
model;
heat release;
heat ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Acta Astronautica"
DOI: 10.1016/j.actaastro.2018.10.022
Abstract: Abstract As single component chemiluminescence cannot accurately measure the distribution of heat release rate, this paper put forward the idea of employing OH* and CH* chemiluminescence for the measurement. However, it is difficult to characterize…
read more here.
Keywords:
chemiluminescence;
release rate;
heat release;
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2017.06.131
Abstract: Abstract The fire behavior of lithium-ion battery is affected by the environment conditions. In this paper, an experimental study is performed to assess the fire hazards of lithium-ion batteries at different atmospheric pressures by means…
read more here.
Keywords:
fire hazards;
hazards lithium;
heat release;
ion ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Aerospace Science and Technology"
DOI: 10.1016/j.ast.2019.105465
Abstract: Abstract A laboratory-scale gas turbine model combustor fueled with methane is studied experimentally with the aid of three-dimensional computed tomography of chemiluminescence (3D-CTC) and high speed (5 kHz) chemiluminescence imaging. Various fuel-lean operating conditions were…
read more here.
Keywords:
heat release;
velocity;
release rate;
release ... See more keywords
Photo by nci from unsplash
Sign Up to like & get
recommendations!
0
Published in 2019 at "Combustion and Flame"
DOI: 10.1016/j.combustflame.2018.12.019
Abstract: Abstract Fluctuations in heat release, hot and cold spots convected by the flow and sound waves are all related to density fluctuations, a number easily detected by interferometry. Same as chemiluminescence, interferometry is a line-of-sight…
read more here.
Keywords:
laser interferometric;
heat;
interferometric vibrometry;
flame ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2019 at "Combustion and Flame"
DOI: 10.1016/j.combustflame.2019.07.043
Abstract: Abstract Combustion characteristics of ethanol-water (EW) droplets laden with ceria nanoparticles are investigated. The present experimental study focuses on three facets of droplet combustion (i) burning time scale of droplets with and without NPs, (ii)…
read more here.
Keywords:
heat;
droplet;
heat release;
coupling droplet ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2021 at "Combustion and Flame"
DOI: 10.1016/j.combustflame.2021.111481
Abstract: Abstract Influences of the reaction zone thickening and extinctions on a heat release rate marker of extremely turbulent hydrogen-enriched methane-air flames are investigated using simultaneous planar laser-induced fluorescence of formaldehyde molecule and hydroxyl radical as…
read more here.
Keywords:
release rate;
rate marker;
heat release;