Influence of hydrothermal treatment on the structural and digestive changes of actomyosin.
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the science of food and agriculture"
DOI: 10.1002/jsfa.9893
Abstract: BACKGROUND Heat treatment induced both structural and digestive change of meat protein. However, little have been revealed regarding the associations between structural changes and digested peptides of myofibrillar proteins. This work investigated the effects of… read more here.
Keywords: heat treatment; structural digestive; treatment; actomyosin ... See more keywords
The influence of heat treatment process on mechanical properties of surface treated volcanic ash particles/polyphenylene sulfide composites
Sign Up to like & getrecommendations! Published in 2018 at "Polymer Composites"
DOI: 10.1002/pc.24105
Abstract: This study primarily presents the effects of VA particle loading at various concentrations (0, 5, 10, 15, 20 and 25 wt.%) on the mechanical properties of polyphenylene sulfide (PPS) composites which are determined by tensile… read more here.
Keywords: heat treatment; surface treated; treatment; mechanical properties ... See more keywords
Heat Treatment Effect on Solid Particle Erosion Properties of Polyphenylene Sulfide Composites Reinforced With Silane Coupled Volcanic Ash Particles
Sign Up to like & getrecommendations! Published in 2018 at "Polymer Composites"
DOI: 10.1002/pc.24110
Abstract: In this study both heat treatment and silane coupling effects on solid particle erosion behavior of volcanic ash (VA) particles reinforced polyphenylene sulfide (PPS) composites were investigated. Firstly, samples with various concentrations of pristine VA… read more here.
Keywords: silane coupled; heat treatment; particle erosion; pps composites ... See more keywords
Effect of Combined Cyclic Heat Treatment on AISI 1080 Steel: Part II-Mechanical Property Evaluation
Sign Up to like & getrecommendations! Published in 2017 at "Steel Research International"
DOI: 10.1002/srin.201600215
Abstract: A typical plain carbon eutectoid steel (without addition of any significant alloying element) is developed possessing notably high strength (UTS = 2016 MPa) and reasonable ductility (%Elongation = 11) with an application of typical cyclic heat treatment that involves a… read more here.
Keywords: heat treatment; steel; cyclic heat; combined cyclic ... See more keywords
Study of Phase Transformations in Steel X38CrMoV5‐1 Using Dilatometry and Differential Thermal Analysis
Sign Up to like & getrecommendations! Published in 2017 at "Steel Research International"
DOI: 10.1002/srin.201600229
Abstract: The phase transformations of the X38CrMoV5-1 (AISI H11-1) steel are studied in the present work. Parts are usually manufactured by die-casting followed by a heat treatment, and the resulting microstructure as well as the mechanical… read more here.
Keywords: heat treatment; phase transformations; thermal analysis; differential thermal ... See more keywords
Effect of heat treatment duration on the thermal conductivity of spruce and poplar wood
Sign Up to like & getrecommendations! Published in 2017 at "European Journal of Wood and Wood Products"
DOI: 10.1007/s00107-017-1170-2
Abstract: Changes in the thermal conductivity and density of Pannónia poplar (Populus x euramericana cv. Pannónia) and spruce (Picea abies) caused by heat treatment were examined. The specimens were treated at 180 °C for 15, 25 and… read more here.
Keywords: thermal conductivity; heat treatment; conductivity; wood ... See more keywords
Composite electrodes of WO3 coating on mesocarbon microbeads of a supercapacitor
Sign Up to like & getrecommendations! Published in 2018 at "Microsystem Technologies"
DOI: 10.1007/s00542-017-3618-z
Abstract: In this study, a composite electrode of a supercapacitor was fabricated by coating tungsten oxide (WO3) onto mesocarbon microbeads with a high-specific surface area (2685 m2 g−1). Composite carbon was prepared through composite solution filtration and heat… read more here.
Keywords: heat treatment; mesocarbon microbeads; composite electrode; composite electrodes ... See more keywords
Polycyclic aromatic hydrocarbons in seasoned-roasted laver and their reduction according to the mixing ratio of seasoning oil and heat treatment in a model system
Sign Up to like & getrecommendations! Published in 2019 at "Food Science and Biotechnology"
DOI: 10.1007/s10068-019-00569-w
Abstract: In food processing, polycyclic aromatic hydrocarbons (PAHs) can be generated during heat treatment, and the PAHs in seasoned-roasted (SR) laver can be reduced by checking points during manufacturing. Benzo (a) anthracene, chrysene, benzo (b) fluoranthene,… read more here.
Keywords: heat treatment; polycyclic aromatic; oil; roasted laver ... See more keywords
The Influence of Thermal Processing on the Properties of Carbon Fibers Based on Polyoxadiazole
Sign Up to like & getrecommendations! Published in 2017 at "Fibre Chemistry"
DOI: 10.1007/s10692-018-9878-2
Abstract: The influence of heat treatment on the properties of carbon fibers based on polyparaphenylene-1,3,4-oxadiazole was studied. Dependences of mass loss, shrinkage, linear density and electrical resistance of carbon fibers on the final heat treatment temperature… read more here.
Keywords: properties carbon; heat treatment; fibers based; carbon fibers ... See more keywords
In-situ determination of thickness and electrochemical properties of barrier oxide film on impure aluminium in aqueous solution
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Applied Electrochemistry"
DOI: 10.1007/s10800-018-1169-3
Abstract: Lead is present as a trace element (ppm level) in nearly all commercial aluminium alloys. The objective of this work is to investigate the changes incurred by the presence of a small amount (20 ppm) of… read more here.
Keywords: heat treatment; electrochemical properties; aluminium; barrier oxide ... See more keywords
Enhancement of the mechanical properties of electrospun lignin-based nanofibers by heat treatment
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science"
DOI: 10.1007/s10853-017-1160-0
Abstract: Unique composite nanofibers were produced by electrospinning solvent-fractionated lignin using a small percentage of polyethylene oxide mixed with nanocrystalline cellulose (NCC) for fiber formation and reinforcement, respectively. The materials were characterized and the mechanical properties… read more here.
Keywords: heat treatment; lignin; properties electrospun; mechanical properties ... See more keywords