Effects of heat treatments on photoaging properties of Moso bamboo (Phyllostachys pubescens Mazel)
Sign Up to like & getrecommendations! Published in 2018 at "Wood Science and Technology"
DOI: 10.1007/s00226-018-1042-x
Abstract: Moso bamboos were heat-treated in three media separately: hot water, hot air and saturated steam, and then radiated by an ultraviolet (UV) 313 light for 56 days to imitate 1-year solar radiation in Southeast China. After… read more here.
Keywords: color; bamboos; heat treatments; spectroscopy ... See more keywords
Simulation of Domain Structure in Sm(Co, Fe, Cu, Zr)7.5-Type Alloy After Different Heat Treatments
Sign Up to like & getrecommendations! Published in 2020 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-020-00593-2
Abstract: The domain structure and its change as a result of heat treatment of alloys of type Sm(Co, Cu, Fe, Zr)7.5 is simulated with the use of the FMRM software based on the phenomenological approach to… read more here.
Keywords: simulation domain; heat treatments; domain; domain structure ... See more keywords
Effect of Local Postweld Heat Treatments on Metal Inert Gas-Welded A7N01S-T5 Joints
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04128-6
Abstract: T6, T7, and retrogression and reaging (RRA) postweld heat treatments (PWHTs) were redefined and deployed to restore MIG-welded A7N01-T5 aluminum alloy joints in train-body structures using an inductive heating device. After the PWHT, the microstructures… read more here.
Keywords: heat treatments; postweld; metal; effect ... See more keywords
Microstructure and properties of coarse-grained WC–10Co cemented carbides with different carbon contents during heat treatments
Sign Up to like & getrecommendations! Published in 2019 at "Rare Metals"
DOI: 10.1007/s12598-019-01276-5
Abstract: The effects of cryogenic treatment (CT) and tempering-cryogenic treatment (TCT) on the microstructure and properties of coarse-grained WC–10Co cemented carbides with different carbon contents were researched. The binder phase, WC mean grain sizes, W solubility… read more here.
Keywords: heat treatments; cemented carbides; carbides different; microstructure properties ... See more keywords
Improvement in Corrosion Behavior of Al–Ti Alloy by Adding 2 wt% Magnesia and 1 wt% Silicon Carbide
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-017-0098-8
Abstract: Aluminum building wire wastes were used to produce Al alloy by adding 4 wt% of titanium. Also, aluminum matrix composite was fabricated by adding 2 wt% MgO–1 wt% SiC to investigate the corrosion behavior of Al–Ti alloy and… read more here.
Keywords: alloy; heat treatments; corrosion; behavior alloy ... See more keywords
Using heat treatments, high-pressure torsion and post-deformation annealing to optimize the properties of Ti-6Al-4V alloys
Sign Up to like & getrecommendations! Published in 2017 at "Acta Materialia"
DOI: 10.1016/j.actamat.2017.09.018
Abstract: Abstract Experiments were conducted to investigate the processing parameters that may be used to optimize the properties of Ti-6Al-4V alloys. The alloy was initially subjected to two different heat treatments leading to the formation of… read more here.
Keywords: pressure torsion; heat treatments; 6al alloys; high pressure ... See more keywords
Influence of heat treatments on the corrosion mechanism of additive manufactured AlSi10Mg
Sign Up to like & getrecommendations! Published in 2019 at "Corrosion Science"
DOI: 10.1016/j.corsci.2018.11.038
Abstract: Abstract This study focuses on the effect of heat treatments on the microstructure and corrosion behaviour of additive manufactured AlSi10Mg specimens. Non heat treated, artificially aged and stress released specimens were studied. The microstructure showed… read more here.
Keywords: manufactured alsi10mg; additive manufactured; influence heat; corrosion ... See more keywords
Influence of heat treatments on the susceptibility of 9%Ni low carbon steel to sulfide stress corrosion cracking
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2020.104554
Abstract: Abstract Low carbon steels with Ni addition are selected to low temperature and cryogenic services. Recently, 9%Ni low carbon steel has been selected to cryogenic pipes and vessels in the oil and gas off-shore platforms… read more here.
Keywords: carbon; heat treatments; low carbon; carbon steel ... See more keywords
Heat-induced inactivation of enzymes in milk and dairy products. A review
Sign Up to like & getrecommendations! Published in 2021 at "International Dairy Journal"
DOI: 10.1016/j.idairyj.2021.105104
Abstract: Abstract Heat treatments are used extensively in the dairy industry, primarily to inactivate bacteria but also to inactivate enzymes that can cause detrimental effects. In addition, some enzymes have attracted attention as markers of particular… read more here.
Keywords: dairy; enzymes milk; dairy industry; heat ... See more keywords
Study of the effect of hydrogen charging on the tensile properties and microstructure of four variant heat treatments of nickel alloy 718
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2017.02.149
Abstract: Abstract This study examined the hydrogen embrittlement sensitivity of nickel alloy 718 given four different heat treatments to obtain various microstructural states. The four heat treatments examined are the oil and gas 718 heat treatment,… read more here.
Keywords: heat treatment; hydrogen; heat treatments; nickel alloy ... See more keywords
Influence of heat treatments on plastic flow of laser deposited Inconel 718: Testing and microstructural based constitutive modeling
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Plasticity"
DOI: 10.1016/j.ijplas.2020.102865
Abstract: Abstract This work focuses on the experimental investigation into the heat-treatment influence on the plastic flow behavior of the laser metal deposited (LMD) Nickel-base superalloy Inconel 718 and the microstructural based constitutive modeling. The uniaxial… read more here.
Keywords: heat; plastic flow; heat treatments; inconel 718 ... See more keywords