Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Advances in Polymer Technology"
DOI: 10.1002/adv.21776
Abstract: The thermal degradation kinetics of powder isotactic polypropylene was investigated in a thermobalance system, at non-isothermal heating conditions with heating rate of 5, 10, 15, and 20°C min−1 in the temperature range of 30–600°C under…
read more here.
Keywords:
activation energy;
polypropylene;
activation;
apparent activation ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Steel Research International"
DOI: 10.1002/srin.201600351
Abstract: Ultrafast heating (UFH) experiments have been carried out in cold rolled ultra low carbon (ULC) steel, followed by quenching. The selected heating rates are in the range between 10 and 800 degrees Cs-1. The recrystallization…
read more here.
Keywords:
ultra low;
rolled ultra;
cold rolled;
steel ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Climate Dynamics"
DOI: 10.1007/s00382-019-04682-8
Abstract: A record of global single-layered ice cloud properties has been generated using the CloudSat and CALIPSO Ice Cloud Property Product (2C-ICE) during the period 2007–2010. These ice cloud properties are used as inputs for the…
read more here.
Keywords:
rate profiles;
ice cloud;
radiative heating;
heating ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
2
Published in 2020 at "Journal of Materials Science"
DOI: 10.1007/s10853-020-05341-8
Abstract: The effects of annealing temperature and heating rate on the microstructure, magnetic, and mechanical properties of melt-spun Fe 81.7− x Si 4 B 13 Cu 1.3 Nb x ( x = 0–4) alloy ribbons have been…
read more here.
Keywords:
nanocrystalline alloys;
mechanical properties;
rate;
heating rate ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Thermal Analysis and Calorimetry"
DOI: 10.1007/s10973-020-10145-8
Abstract: Jurassic coal samples from Liuhuanggou (LHG) and Wudong (WD) coal mines, Xinjiang Province, China, were selected for oxidative thermal energy experiments. A temperature-programmed experimental system measured the variation of gaseous products and the changes in…
read more here.
Keywords:
temperature;
isokinetic analysis;
jurassic coal;
coal ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Oxidation of Metals"
DOI: 10.1007/s11085-020-09970-x
Abstract: The ignition temperature of Mg–(1–3) wt% Ca binary alloys has been tested at two different heating rates: a low heating rate (LHR) of 25 °C/min and a high heating rate (HHR) of 45 °C/min under a constant…
read more here.
Keywords:
heating rate;
ignition temperature;
ignition;
binary alloys ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2019 at "Chemical Papers"
DOI: 10.1007/s11696-019-00823-9
Abstract: The present work describes eleven different syntheses of oleate-coated iron-oxide nanoparticles via thermolysis of Fe(III) oleate in high-boiling point organic solvents using a heating mantle with manual heating rate control. It has been shown that…
read more here.
Keywords:
synthesis spherical;
iron oxide;
oxide nanoparticles;
spherical iron ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Microgravity Science and Technology"
DOI: 10.1007/s12217-019-9698-x
Abstract: In order to determine the optimum heating rate for the planned microgravity experiments on the International Space Station (ISS), axisymmetric 2D numerical simulations were performed under the zero-gravity condition to investigate the effect of heating…
read more here.
Keywords:
heating rate;
effect heating;
zero gravity;
seed ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2021 at "Biomass Conversion and Biorefinery"
DOI: 10.1007/s13399-021-01536-4
Abstract: This work evaluated the pyrolytic products from spent coffee residue pyrolysis in a fixed-bed reactor. The effects of the heating rate and temperature on the main pyrolytic products were investigated using a factorial experimental design.…
read more here.
Keywords:
heating rate;
methodology;
spent coffee;
temperature ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Catalysis Today"
DOI: 10.1016/j.cattod.2018.04.044
Abstract: Abstract As an effective method for comprehensive utilization of lignin, steam explosion coupled with base catalysis (SEBC) pretreatment was applied into lignin depolymerization in this paper. The pyrolytic behavior characteristics of raw lignin (RL) and…
read more here.
Keywords:
heating rate;
lignin;
rate;
stage ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Comparative biochemistry and physiology. Part A, Molecular & integrative physiology"
DOI: 10.1016/j.cbpa.2016.10.009
Abstract: The shortnose sturgeon (Acipenser brevirostrum LeSueur, 1818) is a vulnerable species that is found along the eastern coast of North America. Little is known about temperature tolerance in this species and with a rapidly changing…
read more here.
Keywords:
thermal stress;
shortnose sturgeon;
physiology;
stress ... See more keywords