Heat transfer characteristics of flat evaporator loop heat pipe under high heat flux condition with different orientations
Sign Up to like & getrecommendations! Published in 2019 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2019.02.022
Abstract: Abstract This paper reports an experimental study on a high heat flux loop heat pipe (LHP) with different orientations. A flat rectangular evaporator with a dimension of 51 mm (L) × 68 mm (W) × 15 mm (H) was designed. To enhance… read more here.
Keywords: heat; evaporator; heat flux; high heat ... See more keywords
Degradation of tungsten monoblock divertor under cyclic high heat flux loading
Sign Up to like & getrecommendations! Published in 2017 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2017.04.102
Abstract: Abstract The degradation behavior of the ITER divertor under the cyclic high heat flux loading has been varied in the previous studies, which would be induced by the intrinsic difference in the thermo-mechanical properties of… read more here.
Keywords: degradation; high heat; cyclic high; heat flux ... See more keywords
Performance assessment of high heat flux W monoblock type target using thin graded and copper interlayers for application to DEMO divertor
Sign Up to like & getrecommendations! Published in 2019 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2019.01.098
Abstract: Abstract For the development of a divertor for DEMO, the European WPDIV project is underway since 2014. The first phase of the project (2014–2016) aims to provide mock-ups adapted to DEMO operation requirements and the… read more here.
Keywords: heat; copper; divertor; heat flux ... See more keywords
Ultrasonic test results before and after high heat flux testing on W-monoblock mock-ups of EU-DEMO vertical target
Sign Up to like & getrecommendations! Published in 2020 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2020.111886
Abstract: Abstract In the framework of the activity of target development of the European DEMO divertor, ENEA carried out an extensive ultrasonic testing campaign on more than 66 tungsten monoblock mock-ups. The EU-DEMO target development activity… read more here.
Keywords: high heat; mock ups; target; interlayer ... See more keywords
Analysis of hardness and microstructural changes in Tungsten mono-blocks exposed to high heat flux at 10 MW/m2
Sign Up to like & getrecommendations! Published in 2021 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2021.112530
Abstract: Abstract In this study, we investigated the material properties of tungsten mono-blocks undergone high heat flux test. The ITER-like tungsten mono-block specimens were fabricated by two kinds of joining methods. The tungsten-Cu interlayer joint was… read more here.
Keywords: heat; heat flux; mono blocks; high heat ... See more keywords
Assessing the economic feasibility of high heat treatment, using evidence obtained from pasta factories in Sicily (Italy)
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2016.11.032
Abstract: Abstract Pest control in pasta processing industries is considered to be one of the activities that can have the greatest impact on the environment. However, the adoption of techniques with a lower environmental impact can… read more here.
Keywords: sicily italy; pasta; high heat; economic feasibility ... See more keywords
High heat flux performance of W-Eurofer brazed joints
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2017.10.054
Abstract: Abstract The qualification process of the materials and components for the next generation of fusion reactors makes it necessary to expose them to similar service conditions as expected during the service life of the reactor.… read more here.
Keywords: high heat; brazed joints; heat; eurofer brazed ... See more keywords
Balancing good oxygen balance and high heat of formation by incorporating of -C(NO2)2F Moiety and Tetrazole into Furoxan block
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Molecular Structure"
DOI: 10.1016/j.molstruc.2020.128934
Abstract: Abstract It is of great significance to balance energy capability and molecular stability via structural modulation. By combining of oxygen-rich fluorodinitromethyl moiety and nitrogen-rich tetrazole ring, a superior energetic material, 3-(1H-tetrazol-5-yl)-4-fluorodinitromethylfuroxan (FTFO), was synthesized and… read more here.
Keywords: oxygen; oxygen balance; high heat; good oxygen ... See more keywords
Manufacturing, high heat flux testing and post mortem analyses of a W-PIM mock-up
Sign Up to like & getrecommendations! Published in 2019 at "Nuclear Materials and Energy"
DOI: 10.1016/j.nme.2019.100688
Abstract: Abstract In the framework of the European material development programme for fusion power plants beyond the international thermonuclear experimental reactor (ITER), tungsten (W) is an attractive candidate as plasma facing material for future fusion reactors.… read more here.
Keywords: manufacturing; heat flux; post mortem; high heat ... See more keywords
Machine Learning Accelerated Discovery of Promising Thermal Energy Storage Materials with High Heat Capacity.
Sign Up to like & getrecommendations! Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c11350
Abstract: Thermal energy storage offers numerous benefits by reducing energy consumption and promoting the use of renewable energy sources. Thermal energy storage materials have been investigated for many decades with the aim of improving the overall… read more here.
Keywords: heat capacity; energy; thermal energy; high heat ... See more keywords
Computational Investigation of the Thermal-Hydraulic Performance for Twisted Tape Enabled High Heat Flux Components
Sign Up to like & getrecommendations! Published in 2017 at "Fusion Science and Technology"
DOI: 10.1080/15361055.2017.1333823
Abstract: Abstract High heat flux thermal management is an important challenge for upcoming nuclear fusion and plasma physics experiments. The plasma facing components (PFCs) in devices such as ITER or Wendelstein 7-X (W7-X) will be subjected… read more here.
Keywords: high heat; thermal hydraulic; twisted tape; heat ... See more keywords