Endoscope holder-assisted endoscopic coblation tonsillectomy
Sign Up to like & getrecommendations! Published in 2020 at "European Archives of Oto-Rhino-Laryngology"
DOI: 10.1007/s00405-020-06249-4
Abstract: Tonsillectomy is being performed either with a headlight, surgical loupe magnification or with microscopic aid. We report the technique of endoscope holder-assisted endoscopic tonsillectomy using coblation. Coblation tonsillectomy has the primary advantage of limited thermal… read more here.
Keywords: coblation; holder; tonsillectomy; endoscope holder ... See more keywords
Redesigned Sensor Holder for an Atomic Force Microscope with an Adjustable Probe Direction
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Precision Engineering and Manufacturing"
DOI: 10.1007/s12541-021-00561-7
Abstract: The article presents a redesigned sensor holder for an atomic force microscope (AFM) with an adjustable probe direction, which is integrated into a nano measuring machine (NMM-1). The AFM, consisting of a commercial piezoresistive cantilever operated in… read more here.
Keywords: holder; probe direction; sensor holder; metrology ... See more keywords
Effect of thermal condition of solid wall on the stabilization of a preheated and holder-stabilized laminar premixed flame
Sign Up to like & getrecommendations! Published in 2020 at "Energy"
DOI: 10.1016/j.energy.2020.117548
Abstract: Abstract A novel combustor with a flame holder and preheating channels was developed to investigate the synergistic effect of heat and flow recirculation on combustion characteristics. This paper mainly focuses on the thermal condition of… read more here.
Keywords: recirculation; flame; thermal condition; effect ... See more keywords
Fates of pathogenic bacteria in time-temperature-abused and Holder-pasteurized human donor-, infant formula-, and full cream cow's milk.
Sign Up to like & getrecommendations! Published in 2020 at "Food microbiology"
DOI: 10.1016/j.fm.2020.103450
Abstract: This study was conducted to address the dearth in works that simultaneously compare the growth and inactivation behaviors of selected pathogens in different milk products. In worst-case scenarios where hygienic practices are absent and heavy… read more here.
Keywords: milk; temperature; bacteria time; pathogenic bacteria ... See more keywords
Magnetic anisotropy of Co thin films: Playing with the shadowing effect, magnetic field and substrate spinning
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Magnetism and Magnetic Materials"
DOI: 10.1016/j.jmmm.2016.10.157
Abstract: Abstract The shape and magneto-crystalline anisotropies of 10 nm thick Co sputtered films have shown to be dependent on the oblique deposition angle ( α i ), the angular velocity of the substrate-holder ( ω S… read more here.
Keywords: field; substrate; magnetic field; holder ... See more keywords
Tailored wafer holder for a reliable deposition of sputtered aluminium nitride thin films at low temperatures
Sign Up to like & getrecommendations! Published in 2017 at "Materials Science in Semiconductor Processing"
DOI: 10.1016/j.mssp.2017.08.010
Abstract: Abstract Active actuated resonant micro-electro-mechanical-systems (MEMS) are used for sensing purpose like topography analysis and viscosity sensors. Those applications require straight beams and they rely on controlled film stress of the involved thin films, e.g.… read more here.
Keywords: thin films; aluminium nitride; deposition; stress ... See more keywords
Evaluation of Different Holder Devices for Freeze-Drying in Dual-Chamber Cartridges With a Focus on Energy Transfer.
Sign Up to like & getrecommendations! Published in 2017 at "Journal of pharmaceutical sciences"
DOI: 10.1016/j.xphs.2016.12.016
Abstract: For freeze-drying in dual-chamber cartridges, a holder device to enable handling and safe positioning in the freeze-dryer is necessary. The aim of this study was to analyze 4 different types of holder devices and to… read more here.
Keywords: energy transfer; dual chamber; transfer; chamber cartridges ... See more keywords
In situ Cathodoluminescence and Monitoring Electronic Structure Change Using Optical TEM Holder
Sign Up to like & getrecommendations! Published in 2019 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927619012248
Abstract: A double tilting holder with high stability is essential for in situ transmission electron microscopy (TEM), but the availability of such holders for in situ TEM studies under various external stimuli is limited. Here, we… read more here.
Keywords: holder; microscopy; tem; tem holder ... See more keywords
Microfluidic Mixing Injector Holder Enables Routine Structural Enzymology Measurements with Mix-and-Inject Serial Crystallography Using X-ray Free Electron Lasers.
Sign Up to like & getrecommendations! Published in 2019 at "Analytical chemistry"
DOI: 10.1021/acs.analchem.9b00311
Abstract: The emerging technique of Mix-and-Inject Serial Crystallography (MISC) at X-ray free electron laser sources provides atomically detailed structural information about biomolecules as they function. Despite early successes, MISC is currently limited by the efficiency and… read more here.
Keywords: mix inject; ray free; free electron; injector ... See more keywords
Association of the surgical technique with the structural valve deterioration of a bioprosthesis. A prospective cohort study.
Sign Up to like & getrecommendations! Published in 2022 at "Seminars in thoracic and cardiovascular surgery"
DOI: 10.1053/j.semtcvs.2022.06.013
Abstract: The Trifecta aortic valve is a prosthesis with externally mounted leaflets and a stent which may be deformed during implant. Our aim was to know if the use of the holder as a protection device… read more here.
Keywords: aortic valve; holder; valve; valve deterioration ... See more keywords
3D printing scanning electron microscopy sample holders: A quick and cost effective alternative for custom holder fabrication
Sign Up to like & getrecommendations! Published in 2017 at "PLoS ONE"
DOI: 10.1371/journal.pone.0182000
Abstract: A simple and cost effective alternative for fabricating custom Scanning Electron Microscope (SEM) sample holders using 3D printers and conductive polylactic acid filament is presented. The flexibility of the 3D printing process allowed for the… read more here.
Keywords: sample holders; microscopy; fabrication; cost ... See more keywords