Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2019 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2019.113940
Abstract: Abstract In the present work, a new heat exchanger is introduced for conventional liquid cooling of cylindrical type lithium-ion cells which are contained in battery packs/modules of electric vehicles. The coolant channels are made of…
read more here.
Keywords:
hollow fibers;
battery;
temperature;
polymeric hollow ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2021 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2020.116001
Abstract: Abstract In this work shell-and-tube type polymeric hollow fibers heat exchangers (PHFHE) are described and investigated. These heat exchangers utilize polymeric microchannels with outer diameter of 0.8 mm as the heat transfer surface. Heat exchangers are…
read more here.
Keywords:
shell tube;
heat exchangers;
hollow fibers;
hollow ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2017 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.07.073
Abstract: Abstract Hollow porous pure and La 2 O 3 doped Zn 2 SnO 4 fibers were synthesized via single capillary electrospinning technology and used for obtaining of gas sensors. The as-prepared samples were characterized by…
read more here.
Keywords:
la2o3 doped;
synthesis la2o3;
hollow fibers;
doped sno ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2019.04.029
Abstract: Abstract Temperature swing adsorption (TSA) is a favorable adsorption technique when applied for capturing CO2 but limited by long cycle times and low concentrations of the recovered adsorbate. Direct heating of the adsorbent can mitigate…
read more here.
Keywords:
co2;
hollow fibers;
geometry;
adsorption ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.08.214
Abstract: Abstract Ceramic hollow fibers from natural dolomite with different pore structures have been designed. The unique hollow fibers were produced by the phase inversion method and applying different sintering temperatures. The hollow fiber precursor presented…
read more here.
Keywords:
dolomite;
water;
fiber;
fiber sintered ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Journal of the European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2019.02.043
Abstract: Abstract Asymmetric niobium pentoxide (Nb2O5) hollow fiber membranes were prepared by the phase inversion and sintering process at temperatures ranging from 1000 to 1350°C. The effects of extrusion parameters on the morphology and properties of…
read more here.
Keywords:
fiber membranes;
hollow fibers;
asymmetric niobium;
niobium pentoxide ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2018.02.042
Abstract: Abstract Ultra-performance non-compact Graphene/Carbon Hollow Fibers/Graphene ∼(G/CHF/G) junction like membrane was successfully fabricated by chemical vapor deposition (CVD) of graphene on the two sides of carbon fibers pellet of with thickness of 6 mm. Mono-, bi-junction…
read more here.
Keywords:
graphene;
hollow fibers;
junction like;
carbon hollow ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Materials Letters"
DOI: 10.1016/j.matlet.2017.02.034
Abstract: Abstract High quality silicalite-1 membrane was successfully synthesized on the external surface of ceramic hollow fibers by a novel embedded-seeding method. The samples were characterized by XRD, SEM and gas permeation test. It is shown…
read more here.
Keywords:
embedded seeding;
seeding method;
hollow fibers;
silicalite membrane ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Membrane Science"
DOI: 10.1016/j.memsci.2019.05.001
Abstract: Abstract Among various pore formers, Pluronic F127 (F127), an amphiphilic nonionic surfactant, is an attractive additive which has often been used to create surface pores on hollow fibers and improve the permeate flux. Even though…
read more here.
Keywords:
formation;
hollow fibers;
phase inversion;
membrane ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Microporous and Mesoporous Materials"
DOI: 10.1016/j.micromeso.2016.10.047
Abstract: Abstract Chitosan-assisted in situ impregnation−gelation−hydrothermal (IGH) crystallization process has been developed for the preparation of hollow fiber zeolite NaA membranes. Firstly, chitosan-zeolite NaA composite hollow fibers were prepared successfully by assistance of a simple homemade…
read more here.
Keywords:
impregnation gelation;
situ impregnation;
hollow fibers;
zeolite naa ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Materials Today Energy"
DOI: 10.1016/j.mtener.2020.100391
Abstract: Abstract Solar-driven evaporation based on photothermal materials is emerging as a sustainable fresh water generation technology for alleviating water scarcity. To realize the efficient and stable desalination under omnidirectional illumination, here, a “Pinscreen”-inspired photothermal hollow…
read more here.
Keywords:
photothermal hollow;
illumination;
desalination;
fibers arrays ... See more keywords