Articles with "hot compression" as a keyword



Photo by joshuanewton from unsplash

Modeling Deformation Flow Curves and Dynamic Recrystallization of BA-160 Steel During Hot Compression

Sign Up to like & get
recommendations!
Published in 2018 at "Metals and Materials International"

DOI: 10.1007/s12540-018-0113-8

Abstract: The hot deformation behavior of a high strength low carbon steel was investigated using hot compression test at the temperature range of 850–1100 °C and under strain rates varying from 0.001 to 1 s−1. It was found… read more here.

Keywords: hot compression; dynamic recrystallization; deformation; steel ... See more keywords
Photo by joshuanewton from unsplash

Hot compression deformation behavior of biomedical Ni–Ti alloy

Sign Up to like & get
recommendations!
Published in 2019 at "Rare Metals"

DOI: 10.1007/s12598-019-01291-6

Abstract: Biomedical Ti-55.78 (wt%) Ni alloy samples were prepared by vacuum induction melting, and their hot compression deformation behavior was studied in the deformation temperature range of 750–950 °C, the strain rate range of 0.001–1.000 s−1 and the true strain range… read more here.

Keywords: alloy; hot compression; compression deformation; biomedical alloy ... See more keywords
Photo from wikipedia

Hot compression behaviors and microstructure evolutions of a cast dual-phase NiCoFeCrAl0.7 high-entropy alloy

Sign Up to like & get
recommendations!
Published in 2021 at "Intermetallics"

DOI: 10.1016/j.intermet.2021.107314

Abstract: Abstract Hot compression behaviors and microstructure evolutions of a cast dual-phase NiCoFeCrAl0.7 high-entropy alloy (HEA) consisting of 79.2 vol% face-centered-cubic (FCC) plus 20.8 vol% body-centered-cubic (BCC) phases were investigated under various parameters. Dynamic recrystallization (DRX) dominated the… read more here.

Keywords: compression; behaviors microstructure; compression behaviors; dual phase ... See more keywords
Photo from wikipedia

Enhanced mechanical properties of a hot-extruded AZ80 Mg alloy rod by pre-treatments and post-hot compression

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2017.12.296

Abstract: Abstract A hot-extruded AZ80 Mg alloy rod was subjected to pre-treatments and post-hot compression in this work. Microstructure evolutions and resultant mechanical properties were investigated using samples with different states. The sample processed by solid… read more here.

Keywords: hot compression; pre; hot extruded; mechanical properties ... See more keywords
Photo by joshuanewton from unsplash

Effect of Sm on dynamic recrystallization of Mg-8Gd-0.5Zr alloy during hot compression

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2021.158648

Abstract: Abstract Mg-8Gd-0.5Zr (wt.%) alloy and Mg-8Gd-3Sm-0.5Zr (wt.%) alloy were prepared by casting method in this paper. The microstructures of the two alloys after hot compression at 350~500 ℃ and strain rate of 0.002~1 s-1 were studied,… read more here.

Keywords: 5zr alloy; dynamic recrystallization; hot compression;
Photo from wikipedia

Effect of hydrothermal hot-compression method on the antimicrobial performance of green building materials from heterogeneous cellulose wastes

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of Cleaner Production"

DOI: 10.1016/j.jclepro.2020.124377

Abstract: Abstract Microbiomes in the built environment is an emerging topic of high-relevance, as biodeterioration and biodegradation of porous and polymer materials may be major public health risk factors. Epidemiological studies have confirmed indoor airborne microorganisms… read more here.

Keywords: hydrothermal hot; building; effect; hot compression ... See more keywords
Photo from wikipedia

Microstructure and texture development during hot-compression of Ti5321

Sign Up to like & get
recommendations!
Published in 2021 at "Materials Characterization"

DOI: 10.1016/j.matchar.2021.111297

Abstract: Abstract The microstructure and texture development of the metastable β‑titanium alloy Ti5321 during hot-compression were investigated by electron backscatter diffraction. Above the β-transus temperature, deformation is accompanied by continuous dynamic recrystallization leading to immediate steady… read more here.

Keywords: compression; texture development; microstructure texture; hot compression ... See more keywords
Photo by refargotohp from unsplash

Hot compression behaviors and microstructural evolution of Be-38wt.%6061Al

Sign Up to like & get
recommendations!
Published in 2021 at "Materials Letters"

DOI: 10.1016/j.matlet.2021.129882

Abstract: Abstract The compressive deformation performance of Be-38wt.%6061Al coordination was investigated in the temperature range from 250 to 550 °C and strain rate from 0.01 to 10 s-1. The soften mechanism showed in the stress-strain curve… read more here.

Keywords: evolution 38wt; microstructural evolution; 38wt 6061al; compression behaviors ... See more keywords
Photo by joshuanewton from unsplash

Dynamic recrystallization and phase transformation behavior of a wrought β-γ TiAl alloy during hot compression

Sign Up to like & get
recommendations!
Published in 2020 at "Progress in Natural Science: Materials International"

DOI: 10.1016/j.pnsc.2020.08.008

Abstract: Abstract The dynamic recrystallization (DRX) and phase transformation (PT) behavior of a wrought β-γ TiAl alloy during hot compression under various deformation temperatures were investigated. The typical work hardening and flow softening features indicated that… read more here.

Keywords: compression; hot compression; drx; dynamic recrystallization ... See more keywords
Photo from wikipedia

Hot Compression Test of Heat Resistant Steel

Sign Up to like & get
recommendations!
Published in 2017 at "Acta Physica Polonica A"

DOI: 10.12693/aphyspola.131.1340

Abstract: This article deals with the analysis of formability of heat resistant steel type 9Cr–1Mo by physical laboratory simulation — hot compression test. The 9Cr–1Mo steel belongs to modern 9%Cr tempered martensitic steel for high-temperature applications… read more here.

Keywords: compression test; compression; hot compression; heat resistant ... See more keywords
Photo by davidhellmann from unsplash

Recystallization of HSLA steel austenite as revealed with a hot-compression test

Sign Up to like & get
recommendations!
Published in 2018 at "Materiali in Tehnologije"

DOI: 10.17222/mit.2017.065

Abstract: El¿bieta Kalinowska-Ozgowicz1, Roman Kuziak2, Wojciech Ozgowicz3 1Lublin University of Technology, Fundamentals of Technology Faculty, 38 Nadbystrzycka Str., 20-618 Lublin, Poland 2Institute for Ferrous Metallurgy, 12 K. Miarki Str., 44-100 Gliwice, Poland 3Silesian University of Technology,… read more here.

Keywords: hot compression; hsla steel; austenite revealed; revealed hot ... See more keywords