Articles with "hot ductility" as a keyword



Hot Ductility and Fracture Phenomena of Low‐Carbon V–N–Cr Microalloyed Steels

Sign Up to like & get
recommendations!
Published in 2019 at "steel research international"

DOI: 10.1002/srin.201900265

Abstract: The hot ductility of low‐carbon V–N–Cr microalloyed steel is studied using a thermomechanical simulator. The steel is solution treated at 1350 °C and cooled at 15 °C s−1 to the test temperature in the range of 650–1200 °C. Next,… read more here.

Keywords: carbon microalloyed; low carbon; hot ductility; ductility ... See more keywords

Influence of Cooling Rates and Titanium Content on Hot Ductility in Niobium‐Fixed Microalloyed Steels

Sign Up to like & get
recommendations!
Published in 2025 at "steel research international"

DOI: 10.1002/srin.202500359

Abstract: This study aims to understand the fracture mechanisms within the hot ductility trough by investigating four microalloyed steels with varying Ti content and balanced Nb. Variations in the cooling rate and Ti content significantly influence… read more here.

Keywords: microalloyed steels; hot ductility; cooling rate; ductility ... See more keywords
Photo from wikipedia

Microstructure and hot ductility behavior of Ni-based superalloy U720Li with boron addition

Sign Up to like & get
recommendations!
Published in 2020 at "Rare Metals"

DOI: 10.1007/s12598-020-01395-4

Abstract: Abstract High-alloyed superalloy U720Li is difficult to be processed through the conventional cast and wrought route. Boron is an important strengthening element for superalloys, but the role of boron in the hot ductility of U720Li… read more here.

Keywords: hot ductility; boron addition; superalloy u720li; boron ... See more keywords

Effect of minor rare earth cerium addition on the hot ductility of a reactor pressure vessel steel

Sign Up to like & get
recommendations!
Published in 2019 at "Results in physics"

DOI: 10.1016/j.rinp.2019.102746

Abstract: Abstract The hot ductility of the specimens for a reactor pressure vessel steel (SA508-III), undoped and doped with minor rare earth Ce, is studied through hot tensile tests by means of a Gleeble machine in… read more here.

Keywords: hot ductility; microscopy; rare earth; steel ... See more keywords

On the Role of Boride in the Structural Integrity of a Turbine Disc Superalloy’s Solid State Weld

Sign Up to like & get
recommendations!
Published in 2017 at "Materials"

DOI: 10.12691/materials-5-1-3

Abstract: This work reports the melting of boride precipitates along the grain boundary of a supposedly solid state welding of a polycrystalline superalloy, and discusses its attendant effect on the hot ductility behaviour of the alloy.… read more here.

Keywords: superalloy; solid state; hot ductility; superalloy solid ... See more keywords

Effect of Boron on Hot Ductility and Room-Temperature Tensile Properties of Microalloyed Steels with Titanium and Niobium

Sign Up to like & get
recommendations!
Published in 2019 at "Materials"

DOI: 10.3390/ma12142290

Abstract: Effect of boron on the hot ductility and room-temperature tensile properties of Ti-Nb-microalloyed steels containing 0.071 wt.% carbon was studied. The thermal stress and thermal strain of continuous casting billets during cooling were simulated via… read more here.

Keywords: boron; hot ductility; tensile; room temperature ... See more keywords

Microscopic Investigation for Experimental Study on Transverse Cracking of Ti-Nb Containing Micro-Alloyed Steels

Sign Up to like & get
recommendations!
Published in 2024 at "Materials"

DOI: 10.3390/ma17040900

Abstract: The influence of Ti on the behavior of hot ductility was examined in four different Ti-containing micro-alloyed steels with a constant content of Nb. Thermomechanical investigations using a dilatometer were carried out to simulate the… read more here.

Keywords: containing micro; micro alloyed; hot ductility; alloyed steels ... See more keywords

Effects of Sn and Sb on the Hot Ductility of Nb+Ti Microalloyed Steels

Sign Up to like & get
recommendations!
Published in 2020 at "Metals"

DOI: 10.3390/met10121679

Abstract: Referencing the composition of a typical Nb+Ti microalloyed steel (Q345B), two kinds of steels, one microalloyed with Sn and Sb, and the other one only microalloyed with Sb were designed to study the effects of… read more here.

Keywords: microalloyed steels; hot ductility; effects hot; microalloyed steel ... See more keywords