Development of High Corrosion- and Wear-Resistant Al-Si Alloy Coating on AZ80 Mg Alloy by Hot Extrusion
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05134-9
Abstract: Mg alloys have been known as the lightest metal materials. However, their practical use is strictly limited due to their poor corrosion and wear resistances. To improve those resistances simultaneously, the present authors have fabricated… read more here.
Keywords: hot extrusion; alloy; metallurgy; alloy coating ... See more keywords
Microstructure and corrosion behavior of as-cast ADC12 alloy with rare earth Yb addition and hot extrusion
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Central South University"
DOI: 10.1007/s11771-020-4397-8
Abstract: The effects of rare earth ytterbium (Yb) addition and hot extrusion on the microstructure and corrosion behavior of as-cast ADC12 were studied by optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and… read more here.
Keywords: hot extrusion; corrosion; addition hot; microscopy ... See more keywords
Investigation of the Microstructure and Mechanical Properties of AZ31/Graphene Composite Fabricated by Semi-solid Isothermal Treatment and Hot Extrusion
Sign Up to like & getrecommendations! Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03736-w
Abstract: Magnesium matrix composites reinforced with 0.3 wt.% graphene were fabricated by semi-solid isothermal treatment using various reheating conditions and hot extrusion. The microstructures of the hot-extruded AZ31/graphene composites were clearly refined, with the finest grain size… read more here.
Keywords: hot extrusion; solid isothermal; semi solid; fabricated semi ... See more keywords
Failure analysis of hot extrusion die based on dimensional metrology, micro-characterization and numerical simulation — A case study of Ti alloy parts
Sign Up to like & getrecommendations! Published in 2017 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2016.12.015
Abstract: Abstract From an actual production campaign, the hot extrusion process of titanium alloy in a combined die cavity was considered to understand the failure modes of extrusion die. The macro failures and damage states were… read more here.
Keywords: hot extrusion; die; microscopy; failure ... See more keywords
Understanding the structure and rheological properties of potato starch induced by hot-extrusion 3D printing
Sign Up to like & getrecommendations! Published in 2020 at "Food Hydrocolloids"
DOI: 10.1016/j.foodhyd.2020.105812
Abstract: Abstract This work investigates the 3D printability of potato starch (PS). For this purpose, the structure and rheological properties of the PS-based ink under hot-extrusion 3D printing (HE-3DP) at different PS concentrations and printing temperatures… read more here.
Keywords: potato starch; hot extrusion; structure rheological; rheological properties ... See more keywords
Hydrogen storage properties of 2Mg-Fe mixtures processed by hot extrusion at different temperatures
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2017.02.213
Abstract: Abstract 2Mg-Fe mixtures produced by high-energy ball milling were consolidated into bulk form by hot extrusion at different processing temperatures (573 K (300 °C), 623 K (350 °C) and 673 K (400 °C)), aiming to evaluate their influence on the structure… read more here.
Keywords: hot extrusion; 2mg mixtures; hydrogen storage; extrusion different ... See more keywords
Deformation behavior of as-cast and as-extruded Mg97Zn1Y2 alloys during compression, as tracked by in situ neutron diffraction
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Plasticity"
DOI: 10.1016/j.ijplas.2018.08.001
Abstract: Abstract Hot extrusion is an effective process for strengthening magnesium alloys. In this study, we investigated the hot extrusion strengthening mechanism in an Mg97Zn1Y2 alloy with a duplex microstructure consisting of a long period stacking… read more here.
Keywords: hot extrusion; phase; lpso phase; mg97zn1y2 alloys ... See more keywords
The microstructure and influence of hot extrusion on tensile properties of (Gd+B4C)/Al composite
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.09.258
Abstract: Abstract A novel boron carbide and gadolinium particles reinforced Al neutron shielding composite (1%Gd + 15%B4C)/Al was successfully fabricated by vacuum hot pressing method, and its microstructure and tensile properties before and after hot extrusion were studied.… read more here.
Keywords: hot extrusion; containing phases; microstructure influence; tensile properties ... See more keywords
Effects of hot extrusion on microstructure and mechanical properties of Mg matrix composite reinforced with deformable TC4 particles
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Magnesium and Alloys"
DOI: 10.1016/j.jma.2019.05.015
Abstract: Abstract Mg matrix composites were often reinforced by non-deformable ceramic particles. In this paper, a novel Mg matrix composite reinforced with deformable TC4 (Ti–6Al–4 V) particles was fabricated and then extruded. The evolutions of microstructure and… read more here.
Keywords: hot extrusion; tc4; tc4 particles; mechanical properties ... See more keywords
Microstructure evolution and mechanical properties of 2196 Al-Li alloy in hot extrusion process
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2019.116348
Abstract: Abstract Al-Li alloys are considered as promising materials for the aircraft and aerospace industries. As an effective way of producing complex profiles, the hot extrusion process has become more attractive. Here, isothermal extrusion of homogenized… read more here.
Keywords: texture; extrusion; mechanical properties; hot extrusion ... See more keywords
Characterization of hot extrusion and heat treatment on mechanical properties in a spray formed ultra-high strength Al-Zn-Mg-Cu alloy
Sign Up to like & getrecommendations! Published in 2018 at "Materials Characterization"
DOI: 10.1016/j.matchar.2018.07.012
Abstract: Abstract To obtain the optimal mechanical properties, several processes including spray forming technology, two passes hot extrusion and substantial heating treatments were operated on an Al-Zn-Mg-Cu-Zr alloy. The characterization methods used in this study include… read more here.
Keywords: hot extrusion; strength; treatment; mechanical properties ... See more keywords