Terahertz Dielectric Properties of Polycrystalline MgAl2O4 Spinel Obtained by Microwave Sintering and Hot Pressing
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Infrared, Millimeter, and Terahertz Waves"
DOI: 10.1007/s10762-019-00582-4
Abstract: This paper describes the fabrication of polycrystalline magnesium aluminate spinel (MgAl2O4) by microwave sintering and hot pressing and the investigation of its dielectric properties in the millimeter-wave and terahertz frequency range. The dielectric properties were… read more here.
Keywords: hot pressing; dielectric properties; range; sintering hot ... See more keywords
Preparation of Aluminum–Carbon Nanotubes Composite Material by Hot Pressing
Sign Up to like & getrecommendations! Published in 2018 at "Metallurgist"
DOI: 10.1007/s11015-018-0569-2
Abstract: A hot pressing method is developed for aluminum powder with preliminary sample and die heating to 600°C. The effect of modifying aluminum with carbon nanotubes in an amount of 0.01–1 wt.% is studied. The microstructure,… read more here.
Keywords: carbon; preparation aluminum; carbon nanotubes; aluminum ... See more keywords
Synergistic effect of graphene oxide/montmorillonite-sodium carboxymethycellulose ternary mimic-nacre nanocomposites prepared via a facile evaporation and hot- pressing technique.
Sign Up to like & getrecommendations! Published in 2019 at "Carbohydrate polymers"
DOI: 10.1016/j.carbpol.2019.115026
Abstract: Montmorillonite (MMT) and graphene oxide (GO), as important building block materials, are becoming hot candidates to construct biomimetic hierarchical structure materials. In this work, we fabricated integrated strong and stiff cellulosed-based nanocomposites via a simple… read more here.
Keywords: graphene oxide; evaporation hot; pressing technique; synergistic effect ... See more keywords
Microtopography and mechanical properties of vacuum hot pressing Al/B 4 C composites
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.11.065
Abstract: Abstract Al/B 4 C composites with various volume contents of B 4 C (5%, 10%, 15%, 20%, and 25%) reinforcing the Al matrix, have been fabricated by vacuum hot press sintering at 680 °C, with a… read more here.
Keywords: vol composites; microtopography mechanical; properties vacuum; vacuum hot ... See more keywords
Fabrication of fine-grained α/β Si3N4 by Hot Pressing Flowing Sintering at 1550 °C
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.04.094
Abstract: Abstract In this paper, Hot Pressing Flowing Sintering (HPFS) was successfully applied to the consolidation of silicon nitride ceramics at low sintering temperature. Fine-grained α/β-Si3N4 with high density was fabricated by HPFS at 1550 °C. The… read more here.
Keywords: hot pressing; pressing flowing; flowing sintering; grained si3n4 ... See more keywords
Influence of B4C nanoparticles on mechanical behaviour of Silicon brass nanocomposite through mechanical alloying and hot pressing
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.06.094
Abstract: Abstract This research article has concentrated to develop a novel silicon brass of [82Cu4Si14Zn]100-x – x wt.% B4C (x = 0, 3, 6, 9, and 12) nanocomposites which were synthesized by mechanical alloying followed by vacuum hot… read more here.
Keywords: hot pressing; silicon brass; mechanical alloying; b4c nanoparticles ... See more keywords
The microstructure and mechanical properties of Ni/Al2O3 composites by in-situ generated CaAl12O19 and ZrO2 via hot pressing sintering
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.02.088
Abstract: Abstract Ni/Al2O3 composites with a varying mass fraction of CaZrO3 (0–12 wt%) were prepared by vacuum hot pressing sintering at 1650 °C under a pressure of 30 MPa for 30 min to investigate how CaZrO3 affect the mechanical properties… read more here.
Keywords: microstructure mechanical; pressing sintering; mechanical properties; caal12o19 zro2 ... See more keywords
Hot pressing and microstructural characterization of SiC and TiN added TiB2 ceramics
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.09.258
Abstract: Abstract This investigation aimed to study the individual and synergic impacts of SiC and TiN additives on the sinterability and microstructure of TiB2-based ceramics. The hot-pressing method at 2000 °C was implemented to fabricate the samples.… read more here.
Keywords: pressing microstructural; microstructural characterization; tin; sic tin ... See more keywords
Microstructural characterization of TiB2–SiC–BN ceramics prepared by hot pressing
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.07.080
Abstract: Abstract This research intended to evaluate the discrete and cumulative impacts of hexagonal SiC and BN additives on the microstructural features and consolidation behavior of TiB2-based materials. All specimens were sintered at the same hot-pressing… read more here.
Keywords: hot pressing; sic hbn; tib2; tib2 sic ... See more keywords
Dually self-reinforced Poly(ε-caprolactone) composites based on unidirectionally arranged fibers
Sign Up to like & getrecommendations! Published in 2018 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2018.07.011
Abstract: Abstract Dually self-reinforced Poly(e-caprolactone) (PCL) composites were prepared to broaden its load-bearing applications as tissue engineering scaffolds. The composites were prepared from bi-component PCL yarns composed of self-nucleated PCL drawn fibers and PCL matrix by… read more here.
Keywords: self reinforced; dually self; poly caprolactone; reinforced poly ... See more keywords
Hot pressing in conduit faults during lava dome extrusion: Insights from Mount St. Helens 2004–2008
Sign Up to like & getrecommendations! Published in 2018 at "Earth and Planetary Science Letters"
DOI: 10.1016/j.epsl.2017.11.010
Abstract: Abstract Rhyodacitic volcanoes such as Mount St. Helens (MSH), Soufriere Hills, Mount Unzen and Mount Pelee erupt spines mantled by layers of magma-derived cataclasite and fault gouge. MSH produced seven lava spines from 2004–2008 composed… read more here.
Keywords: mount helens; 2004 2008; dome extrusion; conduit ... See more keywords