Evaluating the Effect of Hot‐Rolling Reduction on the Mechanical Properties of In Situ Formed Aluminum–Magnesium–Silicon (Al‐Mg2Si) Composites
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201900609
Abstract: The effects of hot rolling on the microstructure and mechanical properties of as‐cast Al‐15Mg2Si, Al‐20Mg2Si, and modified Al‐15Mg2Si in situ composites are studied. During rolling, the primary and eutectic Mg2Si particles undergo mechanical fragmentation and… read more here.
Keywords: mg2si; evaluating effect; ductility; hot rolling ... See more keywords
Simultaneously Improving Strength and Ductility of Mg−3Li−8Gd−2Y−1.5Ag Alloy by Solution Treatment and Hot‐Rolling Process
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202100530
Abstract: The microstructure and mechanical properties of Mg−3Li−8Gd−2Y−1.5Ag (wt%) alloy at as‐cast state, as‐solution state, and as‐rolled state (three rolling reductions of 30, 50, and 70%) are investigated. With the increase in solution time at 520 °C,… read more here.
Keywords: 5ag alloy; strength ductility; solution; hot rolling ... See more keywords
Dynamic Transformation During the Simulated Hot Rolling of an API‐X80 Steel
Sign Up to like & getrecommendations! Published in 2019 at "steel research international"
DOI: 10.1002/srin.201900091
Abstract: The occurrence of dynamic transformation is investigated during the simulated hot rolling of an API‐X80 steel. Torsion tests are carried out under continuous cooling conditions, with all deformation passes applied above the equilibrium transformation temperature.… read more here.
Keywords: simulated hot; rolling api; transformation; hot rolling ... See more keywords
Effects of Changing Hot Rolling Direction on Microstructure, Texture and Mechanical Properties of Cu-2.7Be Sheets
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3292-z
Abstract: A hot rolling scheme (cross-rolling and unidirectional rolling) was adopted to process Cu-2.7Be sheets used as multiplier dynodes in photomultiplier. The effects of changing rolling direction on microstructure, texture and mechanical properties were studied by… read more here.
Keywords: effects changing; hot rolling; rolling direction; 7be sheets ... See more keywords
Hot Rolling Effects on the Microstructure and Chemical Properties of NiTiTa Alloys
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04473-6
Abstract: In the present paper, a Ni-37Ti-15Ta (wt.%) shape memory alloy was analyzed in as-cast and hot-rolled conditions, by differential scanning calorimetry, scanning electron microscopy coupled with energy-dispersive spectroscopy, x-ray diffraction and electrochemical tests into a… read more here.
Keywords: microstructure chemical; rolling effects; chemical properties; hot rolling ... See more keywords
Effect of Asymmetric Hot Rolling on the Texture Evolution of Fe–3%Si Steel
Sign Up to like & getrecommendations! Published in 2018 at "Metals and Materials International"
DOI: 10.1007/s12540-018-0145-0
Abstract: In Fe–3%Si steel, the hot rolling process affects not only the hot rolling texture but also the primary recrystallization texture. Here, the effect of asymmetric hot rolling was studied by comparing the difference in the… read more here.
Keywords: steel; rolling texture; hot rolling; asymmetric hot ... See more keywords
Hot Rolling of Flame Retardant Magnesium and Aluminum Alloys to Produce a Cladding Plate
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Precision Engineering and Manufacturing"
DOI: 10.1007/s12541-018-0063-6
Abstract: In order to facilitate the adoption of bimetallic clad sheets, which are composed of flame retardant Mg and Al alloys, as structural materials in transportation vehicles, the rolling speed, asymmetric roll speed ratio, and thickness… read more here.
Keywords: flame retardant; flame; hot rolling; speed ... See more keywords
Study of Processing Map and Effect of Hot Rolling on Mechanical Properties of Aluminum 5083 Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-02003-w
Abstract: Hot deformation behavior of aluminum 5083 alloy was studied based on the compression test done up to true strain 0.5 in the temperature range of 473–773 K and strain rate range of 0.01–10 s −1 . The… read more here.
Keywords: hot rolling; deformation; 5083 alloy; aluminum 5083 ... See more keywords
Effect of Hot Rolling Reduction on Dynamic Recrystallization of Nb–V Bearing HSLA Steel: Physical Simulation and Microtexture Evolution
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-02097-2
Abstract: In the present study, the effect of hot rolling reduction ratio on dynamic recrystallization (DRX) of Nb–V bearing high-strength low-alloy (HSLA) steel was investigated. The hot rolling process was simulated physically by performing single- and… read more here.
Keywords: recrystallization; reduction; rolling reduction; hot rolling ... See more keywords
Effects of Welding Speed and Post-weld Hot Rolling on Microstructure and Mechanical Properties of Friction Stir-Welded AZ31 Magnesium Alloy
Sign Up to like & getrecommendations! Published in 2018 at "Acta Metallurgica Sinica (English Letters)"
DOI: 10.1007/s40195-018-0725-5
Abstract: The as-rolled AZ31 Mg alloy sheets are welded by friction stir welding (FSW) in this study, followed by annealing and hot rolling with different reductions. The effects of welding speed and the rolling reduction on the… read more here.
Keywords: rolling reduction; effects welding; friction stir; hot rolling ... See more keywords
Texture development and properties of Ti-IF steels produced by different hot-rolling processes
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Iron and Steel Research International"
DOI: 10.1007/s42243-018-0182-4
Abstract: Texture is a pivotal factor for the deep drawability of interstitial free steel (IF steel). The evolution of microstructure and recrystallization texture of Ti-IF steel through the processing of hot rolling, cold rolling and annealing… read more here.
Keywords: texture development; steel; development properties; hot rolling ... See more keywords