Sign Up to like & get
recommendations!
0
Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3350-6
Abstract: In the current study, combined parallel tubular channel angular pressing (PTCAP) and tube backward extrusion (TBE), as a recently developed severe plastic deformation (SPD) method, were applied at 300 °C on a commercial Mg-3Al-1Zn alloy tubes…
read more here.
Keywords:
3al 1zn;
severe plastic;
hot tensile;
tensile ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2021 at "Archives of Civil and Mechanical Engineering"
DOI: 10.1007/s43452-021-00217-3
Abstract: In this paper, a unified viscoplastic constitutive model for Ti–6Al–4V alloy coupling with damage and softening mechanisms was established to predict the flow behaviors and damage evolution in hot tensile process. To obtain the flow…
read more here.
Keywords:
damage;
constitutive model;
process;
model ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2017 at "Polymer Testing"
DOI: 10.1016/j.polymertesting.2017.07.032
Abstract: The effects of strain rate and deformation temperature on the deformation behaviors of polyether-ether-ketone (PEEK) were studied by uniaxial tensile tests with the temperature range of 23–150 °C and strain rate of 0.01–1 s−1. The…
read more here.
Keywords:
ether ketone;
ketone peek;
polyether ether;
strain rate ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Materials Research Express"
DOI: 10.1088/2053-1591/ac34b6
Abstract: In this study, the hot tensile test was carried out using the extruded and annealed Mg-1Al-6Y alloy. The effect of temperature and strain rate on the hot tensile deformation behavior of the alloy was systematically…
read more here.
Keywords:
deformation;
tensile deformation;
hot tensile;
1al alloy ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2023 at "Materials"
DOI: 10.3390/ma16020803
Abstract: In this paper, the hot tensile deformation of a GH3230 superalloy double-sheet was conducted under deformation temperatures ranging from 1123~1273 K and strain rates ranging from 0.001~0.2 s−1. The flow behavior of the GH3230 superalloy…
read more here.
Keywords:
deformation;
gh3230 superalloy;
double sheet;
hot tensile ... See more keywords