Polypropylene/short glass fiber/nanosilica hybrid composites: evaluation of morphology, mechanical, thermal, and transport properties
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Bulletin"
DOI: 10.1007/s00289-017-2173-1
Abstract: In this work, the effect of incorporation of glass fiber and nanosilica separately and in combination in a thermoplastic matrix is investigated. Individual micro, nano, and hybrid multiphase composites based on polypropylene were prepared via… read more here.
Keywords: glass; polypropylene short; hybrid composite; fiber nanosilica ... See more keywords
Hybrid Composite Using Natural Filler and Multi-Walled Carbon Nanotubes (MWCNTs)
Sign Up to like & getrecommendations! Published in 2017 at "Applied Composite Materials"
DOI: 10.1007/s10443-017-9667-8
Abstract: This paper presents an experimental study on the development of hybrid composites comprising of multi-walled carbon nanotubes (MWCNTs) and natural filler (oil palm shell (OPS) powder) within unsaturated polyester (UP) matrix. The results revealed that… read more here.
Keywords: walled carbon; carbon nanotubes; hybrid composite; natural filler ... See more keywords
Investigation on mechanical properties of woven alovera/sisal/kenaf fibres and their hybrid composites
Sign Up to like & getrecommendations! Published in 2017 at "Bulletin of Materials Science"
DOI: 10.1007/s12034-016-1343-3
Abstract: The go-green concept results in multipoint focus towards materials made from nature; easily decomposable and recyclable polymeric materials and their composites along with natural fibres ignited the manufacturing sectors to go for higher altitudes in… read more here.
Keywords: woven alovera; sisal kenaf; hybrid composite; investigation ... See more keywords
Fracture behavior of a composite composed by Ti-aluminide multi-layered and continuous-SiCf-reinforced Ti-matrix
Sign Up to like & getrecommendations! Published in 2017 at "Rare Metals"
DOI: 10.1007/s12598-017-0883-z
Abstract: In the present work, a novel hybrid composite composed of Ti-aluminide multi-layered part and continuous-SiCf-reinforced Ti-matrix part using a vacuum hot pressing/hot isostatic pressure (VHP/HIP) sintering process was synthesized. Then, the damage tolerance behavior of… read more here.
Keywords: hybrid composite; aluminide multi; sicf reinforced; multi layered ... See more keywords
Tribological Behavior of Magnesium Hybrid Composite: Effect of Amorphous Silica-Solid Waste Reinforcement Particles to Reduce Material Cost
Sign Up to like & getrecommendations! Published in 2020 at "Silicon"
DOI: 10.1007/s12633-020-00769-8
Abstract: Reducing weight is a crucial factor in automobile industries for structural applications. Waste management includes the collection of storage and recycling of waste. Indians are producing around 230 million tons of waste a year because… read more here.
Keywords: material cost; magnesium hybrid; waste; hybrid composite ... See more keywords
Multi-objective optimization of drilling EDM process parameters of LM13 Al alloy–10ZrB2–5TiC hybrid composite using RSM
Sign Up to like & getrecommendations! Published in 2020 at "Journal of The Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-020-02518-9
Abstract: In this study, a newly engineered stir-cast LM13 aluminium alloy-based hybrid composite (5 wt% of TiC and 10 wt% of ZrB2) is used as workpiece and its machinability investigation is carried out using EDM (electric… read more here.
Keywords: performance characteristics; hybrid composite; process; process parameters ... See more keywords
Dry Sliding Wear Mechanism Maps of Al–7Si–0.3Mg Hybrid Composite: Novel Approach of Agro-Industrial Waste Particles to Reduce Cost of Material
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-019-0227-7
Abstract: Waste materials are one of the biggest threats facing the environment today. In the present work, an attempt has been made by the utilization of waste materials into raw materials to reduce the material cost… read more here.
Keywords: mechanism; dry sliding; waste; hybrid composite ... See more keywords
Synthesis of a novel magnetic Fe3O4/γ-Al2O3 hybrid composite using electrode-alternation technique for the removal of an azo dye
Sign Up to like & getrecommendations! Published in 2017 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.06.172
Abstract: Abstract A novel magnetic adsorbent of Fe3O4/γ-Al2O3 hybrid composite (denoted as M-Fe/Al-H) was developed electrochemically via a sequential application of iron and aluminum electrodes in a one-pot fashion, which called here as electrode-alternation technique, followed… read more here.
Keywords: azo dye; fe3o4 al2o3; novel magnetic; hybrid composite ... See more keywords
Functionalization of cellulosic fibers with a kaolinite-TiO2 nano-hybrid composite via a solvothermal process for flame retardant applications.
Sign Up to like & getrecommendations! Published in 2021 at "Carbohydrate polymers"
DOI: 10.1016/j.carbpol.2021.118108
Abstract: Eco-responsible flame retardant treatments with some resistance to washing are of considerable interest in the sale and applications of technical garments and home textiles. Thus, in the present study, a nano-hybrid composite based on kaolinite-TiO2… read more here.
Keywords: kaolinite tio2; flame retardant; hybrid composite; nano hybrid ... See more keywords
Hygro-thermo-mechanical modelling of multilayered plates: Hybrid composite laminates, fibre metal laminates and sandwich plates
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2019.107388
Abstract: Abstract A new layerwise mixed model is developed for the coupled hygro-thermo-mechanical static analysis of multilayered plates, addressing hybrid composite laminates, fibre metal laminates and sandwich plates under hygro-thermo-mechanical loadings. This model is based on… read more here.
Keywords: thermo mechanical; hybrid composite; hygro thermo; laminates fibre ... See more keywords
Hybrid composite tensile armour wires in flexible risers: A multi-scale model
Sign Up to like & getrecommendations! Published in 2017 at "Composite Structures"
DOI: 10.1016/j.compstruct.2016.11.090
Abstract: Abstract Traditional carbon-steel armour wires pose limitations ( e.g. long spans, weight reduction, corrosion and fatigue) for flexible risers to operate in demanding and deeper water environments. In this context, an alternative to carbon-steel tensile… read more here.
Keywords: flexible risers; hybrid composite; armour wires; model ... See more keywords