Articles with "hybrid films" as a keyword



Photo by ldxcreative from unsplash

Scalable Polyimide‐Organosilicate Hybrid Films for High‐Temperature Capacitive Energy Storage

Sign Up to like & get
recommendations!
Published in 2023 at "Advanced Materials"

DOI: 10.1002/adma.202211487

Abstract: High‐temperature polymer dielectrics have broad application prospects in next‐generation microelectronics and electrical power systems. However, the capacitive energy densities of dielectric polymers at elevated temperatures are severely limited by carrier excitation and transport. Herein, a… read more here.

Keywords: high temperature; density; energy; hybrid films ... See more keywords
Photo from wikipedia

Ultra‐Flexible, Dielectric, and Thermostable Boron Nitride‐Graphene Fluoride Hybrid Films for Efficient Thermal Management

Sign Up to like & get
recommendations!
Published in 2021 at "Advanced Materials Interfaces"

DOI: 10.1002/admi.202002187

Abstract: As an important 2D nanomaterial, boron nitride nanosheet (BNNS) has aroused much academic interest due to its high in‐plane thermal conductivity (TC) and good electrical insulation capability. However, the brittleness and low strength of high‐content… read more here.

Keywords: thermal management; graphene fluoride; efficient thermal; boron nitride ... See more keywords
Photo from wikipedia

Microporous hybrid films from amphiphilic copolymers: surface coated with ZnS nanoparticles using the breath figure (BF) methodology

Sign Up to like & get
recommendations!
Published in 2020 at "Chemical Papers"

DOI: 10.1007/s11696-020-01091-8

Abstract: Abstract High-performance catalysts and photovoltaics form key components for various technological applications. Because catalytic and photovoltaic reactions occur at the interfaces between reactants and surfaces, the chemical, physical, and structural properties of interfaces have been… read more here.

Keywords: methodology; hybrid films; amphiphilic copolymers; zns ... See more keywords
Photo from wikipedia

Ultra-black and self-cleaning all carbon nanotube hybrid films for efficient water desalination and purification

Sign Up to like & get
recommendations!
Published in 2020 at "Carbon"

DOI: 10.1016/j.carbon.2020.06.089

Abstract: Abstract All-carbon nanotube (CNT) hybrid films are fabricated through a facile vacuum filtration method by using hydrophilic single-walled carbon nanotube (SWCNT) films as filters and multi-walled carbon nanotube (MWCNT) powder dispersed in ethanol as liquor.… read more here.

Keywords: carbon; water; carbon nanotube; film ... See more keywords
Photo by richardrschunemann from unsplash

Lanthanide ions-induced formation of hierarchical and transparent polysaccharide hybrid films.

Sign Up to like & get
recommendations!
Published in 2017 at "Carbohydrate polymers"

DOI: 10.1016/j.carbpol.2017.01.047

Abstract: Nacre-like hybrid films based on N-succinyl chitosan (NSC), sodium alginate (SA) and lanthanide ions were fabricated via coordination interactions. In this work, the binary building blocks (NSC and SA) were self-assembled into aligned hydrogel films… read more here.

Keywords: induced formation; ions induced; lanthanide ions; hierarchical nsc ... See more keywords
Photo by sharonmccutcheon from unsplash

Hybrid films of chitosan, cellulose nanofibrils and boric acid: Flame retardancy, optical and thermo-mechanical properties.

Sign Up to like & get
recommendations!
Published in 2017 at "Carbohydrate polymers"

DOI: 10.1016/j.carbpol.2017.08.116

Abstract: Chitosan (CS), cellulose nanofibrils (CNF) and boric acid, the latter of which was used as flame retardant, were combined in transparent, hybrid films that were produced by solvent casting. The flammability and the thermal stability… read more here.

Keywords: boric acid; chitosan cellulose; retardancy; cellulose nanofibrils ... See more keywords
Photo by ocollet from unsplash

AgNPs@CNTs/Ag hybrid films on thiolated PET substrate for flexible electronics

Sign Up to like & get
recommendations!
Published in 2019 at "Chemical Engineering Journal"

DOI: 10.1016/j.cej.2019.01.005

Abstract: Abstract As the baseplate and hinge of various components for the transmission of circuit signals, the flexible printed circuit (FPC) has become a vital component of flexible electronics. However, the bonding strength of the substrate/film… read more here.

Keywords: hybrid films; agnps cnts; flexible electronics; pet substrate ... See more keywords
Photo from wikipedia

Continuous hierarchical carbon nanotube/reduced graphene oxide hybrid films for supercapacitors

Sign Up to like & get
recommendations!
Published in 2017 at "Electrochimica Acta"

DOI: 10.1016/j.electacta.2016.12.159

Abstract: Abstract 3D hierarchical carbon nanotube/reduced graphene oxide (CNT/rGO) hybrid films of enhanced electrochemical performance are obtained, by dispersing graphene oxide (GO) sheets into ethanol carbon source, ferrocene as catalyst and thiophene as promoter, the hybrid… read more here.

Keywords: graphene oxide; carbon nanotube; hierarchical carbon; nanotube reduced ... See more keywords
Photo from wikipedia

Electrochemical fabrication of 3D quasi-amorphous pompon-like Co-O and Co-Se hybrid films from choline chloride/urea deep eutectic solvent for efficient overall water splitting

Sign Up to like & get
recommendations!
Published in 2018 at "Electrochimica Acta"

DOI: 10.1016/j.electacta.2018.04.054

Abstract: Abstract The development of earth-abundant, low-cost, highly active, and durable bifunctional catalysts competent for efficient electrochemical water-splitting is intensively demanding and of vital importance to realize high-purity hydrogen production. Herein, we report that 3D quasi-amorphous… read more here.

Keywords: water splitting; water; deep eutectic; eutectic solvent ... See more keywords
Photo from archive.org

Hybrid films based on holistic celery nanocellulose and lignin/hemicellulose with enhanced mechanical properties and dye removal.

Sign Up to like & get
recommendations!
Published in 2020 at "International journal of biological macromolecules"

DOI: 10.1016/j.ijbiomac.2020.01.102

Abstract: The endeavor to isolate celery lignocellulosic components and reconstruct into nanocellulose filled and holistic biocomposite films is to demonstrate the potential of re-engineering vegetables into nanocomposite films. The structure-properties relations of these hybrid films were… read more here.

Keywords: holistic celery; films based; celery; based holistic ... See more keywords
Photo by rossfindon from unsplash

Continuous thermal control of hydrophilicity/hydrophobicity changes of hybrid films and of their directionality: Kinetics and substrate effects.

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of colloid and interface science"

DOI: 10.1016/j.jcis.2017.06.036

Abstract: A successful methodology for obtaining hybrid films which allow thermal triggering and continuous, irreversible, control of their hydrophilicity/hydrophobicity nature was developed. Two types of poly(dimethylsiloxane)-silica (PDMS@SiO2) films were prepared for that purpose: A hydrophilic film… read more here.

Keywords: change; hydrophobicity; hydrophilicity hydrophobicity; directionality ... See more keywords