Graphene/montmorillonite hybrid nanocomposites based on polypropylene: Morphological, mechanical, and rheological properties
Sign Up to like & getrecommendations! Published in 2018 at "Polymer Composites"
DOI: 10.1002/pc.24166
Abstract: The preparation and characterization of hybrid nanocomposites based on polypropylene (PP) with Moroccan montmorillonite (MMT)/graphene nanosheets (GNs) is reported in this article. In particular, hybrid nanocomposites were prepared by melt compounding for different MMT:GNs ratio… read more here.
Keywords: montmorillonite hybrid; rheological properties; based polypropylene; graphene montmorillonite ... See more keywords
Modeling of thermomechanical properties of polymeric hybrid nanocomposites
Sign Up to like & getrecommendations! Published in 2018 at "Polymer Composites"
DOI: 10.1002/pc.24483
Abstract: This article reports modeling of effective thermomechanical properties of multifunctional carbon nanotube (CNT)-reinforced hybrid polymeric composites (hereafter, it is referred as “fuzzy fiber composite”). The novel constructional feature of fuzzy fiber composite (FFC) is that… read more here.
Keywords: effective thermomechanical; polymeric hybrid; modeling thermomechanical; hybrid nanocomposites ... See more keywords
Optoelectronically suitable graphene oxide-decorated titanium oxide/polyaniline hybrid nanocomposites and their enhanced photocatalytic activity with methylene blue and rhodamine B dye
Sign Up to like & getrecommendations! Published in 2020 at "Polymer Bulletin"
DOI: 10.1007/s00289-020-03182-8
Abstract: Abstract Organic–inorganic photocatalytic hybrid nanocomposites based on titanium oxide nanoparticle and polyaniline decorated with graphene oxide were synthesized via in situ chemical oxidative method using ammonium persulphate as an initiator and different weight percentages of… read more here.
Keywords: graphene oxide; blue rhodamine; photocatalytic activity; methylene blue ... See more keywords
Enhanced photocatalytic degradation of hazardous industrial pollutants with inorganic–organic TiO2–SnO2–GO hybrid nanocomposites
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-01706-1
Abstract: This study reports the photocatalytic degradation of hazardous dyes, methylene blue and reactive orange 4 (RO4) using various compositions of binary TiO2–SnO2 and ternary TiO2–SnO2–GO hybrid nanocomposites under UV-light irradiation. The ternary inorganic–organic hybrid nanocomposites… read more here.
Keywords: tio2 sno2; degradation; degradation hazardous; inorganic organic ... See more keywords
UHMWPE Hybrid Nanocomposites for Improved Tribological Performance Under Dry and Water-Lubricated Sliding Conditions
Sign Up to like & getrecommendations! Published in 2017 at "Tribology Letters"
DOI: 10.1007/s11249-017-0884-y
Abstract: To tap the full potential of polymers to be used as tribo-materials under water lubrication, it is very important to improve their resistance to water uptake on the one hand and improve their strength and… read more here.
Keywords: c15a organoclay; sliding conditions; water; uhmwpe hybrid ... See more keywords
An efficient homogenization scheme for analyzing the elastic properties of hybrid nanocomposites filled with multiscale particles
Sign Up to like & getrecommendations! Published in 2020 at "Journal of The Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-020-02709-4
Abstract: Designing material requires the establishment of structure–property relationships for multiscaled nanoparticle/microparticle-reinforced polymer hybrid nanocomposites. This fundamental task is the first step in developing a reliable new method. In the present study, two micromechanical analytical models… read more here.
Keywords: efficient homogenization; homogenization scheme; homogenization; hybrid nanocomposites ... See more keywords
The Multi-objective Optimization Design Approach for Carbon Fiber Hybrid Nanocomposites Containing NanoClay and NanoZnO Particles by Using OptiComp
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-020-00386-3
Abstract: This paper presents the multi-objective design optimization of Carbon Fiber-Reinforced Polymer hybrid nanocomposites by OptiComp. The use of nanoparticles not only improves the interface strength but also significantly improves stress and hence the propagation of… read more here.
Keywords: carbon fiber; multi objective; optimization; hybrid nanocomposites ... See more keywords
Polypyrrole/Cr2O3 hybrid nanocomposites (NCs) prepared for their structural, morphological, optical and conductivity studies
Sign Up to like & getrecommendations! Published in 2019 at "Composites Communications"
DOI: 10.1016/j.coco.2019.04.004
Abstract: Abstract This work deals with the nanocomposites of Polypyrrole/Cr2O3 which were synthesized via in-situ polymerization. Here the dopant, Cr2O3 nanoparticles (NPs) were synthesized by solution combustion technique using Aloe-Vera gel as organic fuel, whereas Ammonium… read more here.
Keywords: nanocomposites ncs; cr2o3 hybrid; microscopy; hybrid nanocomposites ... See more keywords
Interfacial investigation, mechanical performance and thermal permanence of the inductively hot-pressed alumina ceramic hybrid nanocomposites reinforced by silicon carbide and multilayer graphene
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Refractory Metals and Hard Materials"
DOI: 10.1016/j.ijrmhm.2019.02.010
Abstract: Abstract Hybrid alumina (Al2O3) ceramic nanocomposites containing 3 wt% silicon carbide nanoparticles (SiCnp) and 0.5 wt% multilayer graphene (MLG) were consolidated to near theoretical density (99%) by an inductive hot-pressing (IHP) technology. The enhanced fracture toughness and… read more here.
Keywords: performance; multilayer graphene; silicon carbide; hybrid nanocomposites ... See more keywords
Reinforcing ability and bonding characteristics of multiwall carbon nanotubes and silicon carbide nanoparticles in inductively sintered alumina ceramic hybrid nanocomposites
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.02.226
Abstract: Abstract This paper investigates the interfacial bonding, interfacial nanostructure and reinforcing ability of 4 vol% multi-walled carbon nanotubes (mwCNT) and 6 vol% silicon carbide nanoparticles (SiCNP) in inductively sintered alumina ceramic hybrid nanocomposites. Homogenously dispersed reinforcing inclusions… read more here.
Keywords: carbon nanotubes; reinforcing ability; hybrid nanocomposites; carbide nanoparticles ... See more keywords
Comparison of different activated agents on biomass-derived graphene towards the hybrid nanocomposites with zeolitic imidazolate framework-8 for room temperature hydrogen storage
Sign Up to like & getrecommendations! Published in 2021 at "Journal of environmental chemical engineering"
DOI: 10.1016/j.jece.2021.105118
Abstract: Abstract Surface area and porosity are the main factors that affect hydrogen adsorption at room temperature. In this work, the preparation of rice husk derived graphene (GRHC) using two different activating agents, potassium hydroxide (KOH)… read more here.
Keywords: hydrogen; grhc; hybrid nanocomposites; hydrogen storage ... See more keywords