Study on the low‐velocity impact response of the repaired carbon fiber‐reinforced plastic laminates: Bonded versus scarf repair
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.28128
Abstract: Experimental and simulation studies of the response of bonded‐repaired and scarf‐repaired carbon fiber‐reinforced polymer laminates under the low‐velocity impact (LVI) were carried out. The center‐ and eccentric‐repaired laminates were prepared for experiments. The experimental results… read more here.
Keywords: scarf; damage; impact response; repair ... See more keywords
Effect of Support Boundaries on Impact Response and Residual Properties of Thick‐Ply and Hybrid Laminates
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.70676
Abstract: Boundary conditions are receiving increasing attention in the overall design of composite structures. This study explores the influence of two typical bottom support boundaries on the impact response and residual properties of thick‐ply and ply‐level… read more here.
Keywords: support boundaries; support; thick ply; impact response ... See more keywords
Effect of Mechanical Milling on the Mechanical, Dry Sliding Wear, and Impact Response of Sintered Nickel Based Superalloy
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05256-0
Abstract: In this study, effect of mechanical milling on the mechanical, dry sliding wear and impact response of spark plasma sintered Ni-17Cr6.5Co1.2Mo6Al4W7.6Ta superalloy has been investigated. Two nickel-based superalloy were sintered, firstly in their as-received elemental… read more here.
Keywords: response; dry sliding; effect mechanical; impact response ... See more keywords
A numerical investigation on low velocity impact response of polymer-based nanocomposite plates containing multiscale reinforcements
Sign Up to like & getrecommendations! Published in 2021 at "Journal of The Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-021-02824-w
Abstract: The hybridization of carbon fibers (CFs) with carbon nanotubes (CNTs) is a new way of improving the mechanical and physical performances of composite materials. The aim of this work is to evaluate the low velocity… read more here.
Keywords: low velocity; velocity; response; impact response ... See more keywords
Analytical prediction of the impact response of graphene reinforced spinning cylindrical shells under axial and thermal loads
Sign Up to like & getrecommendations! Published in 2019 at "Applied Mathematical Modelling"
DOI: 10.1016/j.apm.2019.02.024
Abstract: Abstract This paper presents an analytical study that predicts the low-velocity impact response of a spinning functionally graded (FG) graphene reinforced cylindrical shell subjected to impact, external axial and thermal loads. The nanocomposite cylindrical shell… read more here.
Keywords: axial thermal; impact response; cylindrical shell; shell ... See more keywords
Influence of asymmetric hybridization on impact response of 3D orthogonal woven composites
Sign Up to like & getrecommendations! Published in 2020 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2020.108326
Abstract: Abstract The mechanical and failure behavior under high velocity impact of asymmetric hybrid three-dimensional orthogonal woven composite (3DWC) were investigated through experiments and finite element modeling. Two types of non-hybrid and one asymmetric hybrid 3DWCs… read more here.
Keywords: impact response; impact; carbon; orthogonal woven ... See more keywords
Experimental and Finite Element Analysis of the Impact RESPONSE of Agglomerated Cork and its Intraply Hybrid Flax/Basalt Sandwich Structures
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2021.114210
Abstract: Abstract Sandwich structures are widespread in all the industrial applications where a high stiffness-to-weight ratio is required. Despite the unique bending performance, they feature two major drawbacks: the massive exploitation of synthetic materials and a… read more here.
Keywords: sandwich structures; impact response; agglomerated cork;
Transverse impact response of hybrid biaxial/uniaxial braided composite tubes
Sign Up to like & getrecommendations! Published in 2021 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2021.112816
Abstract: Abstract Tubular composites in automobile engineering are susceptible to transverse loading events. This paper deals with transverse low-velocity impacts on interply hybrid tubes made of biaxial/uniaxial braided fabric layers. For comparison, drop weight tests were… read more here.
Keywords: biaxial uniaxial; impact response; impact; uniaxial braided ... See more keywords
Influence of global stiffness and equivalent model on prediction of impact response of RC beams
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Impact Engineering"
DOI: 10.1016/j.ijimpeng.2017.11.014
Abstract: Abstract A spring-mass model is commonly used to predict the impact response of a beam. This type of models usually assumes the beam response is governed by flexural and/or shear response mode in deriving the… read more here.
Keywords: response; impact; impact response; model ... See more keywords
High velocity impact response of composite laminates using modified meso-scale damage models
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Impact Engineering"
DOI: 10.1016/j.ijimpeng.2020.103701
Abstract: Abstract High velocity impact response of quasi-isotropic carbon fiber reinforced polymeric laminates cured from unidirectional plies is studied using finite element models. Rigid steel spheres are used as projectiles. The intraply meso-model originally proposed by… read more here.
Keywords: high velocity; impact; velocity impact; impact response ... See more keywords
On the impact response of UHMWPE woven fabrics: Experiments and simulations
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Mechanical Sciences"
DOI: 10.1016/j.ijmecsci.2021.106574
Abstract: Abstract A comprehensive study on the impact behaviour of UHMWPE woven fabrics is presented in this paper, which consists of four parts: geometric measurement of fabric parameters, tensile testing of constituent yarns, impact testing of… read more here.
Keywords: uhmwpe woven; impact response; woven fabrics; strain ... See more keywords