Ball-milling combined calcination synthesis of In2O3/C3N4 for high photocatalytic activity under visible light irradiation
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-6538-x
Abstract: In2O3/C3N4 composites were prepared with In(OH)3 and C3N4 by ball-milling calcination. The samples were characterized by TG, XRD, TEM, XPS, FT-IR, DRS, EIS, Photocurrent and Photoluminescence measurements. Photocatalytic performance of the catalyst was measured by… read more here.
Keywords: ball milling; in2o3; calcination; photocatalytic activity ... See more keywords
Response improvement of In2O3 hot-wire gas sensor doped by Sn
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-8482-1
Abstract: A simple co-precpitation method was used to synthesize Sn-doped In2O3 materials, with InCl3·4H2O as the precursor and SnCl4·5H2O as the dopant source. The morphology and structure of the synthesized nanoparticles were examined by X-ray diffraction… read more here.
Keywords: in2o3; response; hot wire; gas ... See more keywords
Facile green synthesis of In2O3 bricks and its NO2 gas sensing properties
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-9585-z
Abstract: Recently, metal oxide semiconductor based gas sensors have been used to monitor and maintain amount of toxic gases in environment. Use of In2O3 nano/microstructures have been increased as a heterogeneous catalyst for gas sensing due… read more here.
Keywords: in2o3; no2 gas; gas; synthesis in2o3 ... See more keywords
Ultrasensitive sensor based on Y2O3-In2O3 nanocomposites for the detection of methanol at room temperature
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.07.141
Abstract: Abstract Y2O3-In2O3 nanocomposites (NCs) were prepared via simple co-precipitation and sol-gel processes. Prepared pure Y2O3, In2O3 nanoparticles (NPs) and Y2O3-In2O3 NCs were subjected to their structural, morphological, and compositional characterization via XRD, XPS, FESEM and… read more here.
Keywords: in2o3; response; room; y2o3 in2o3 ... See more keywords
Fabrication of In2O3/In2S3 heterostructures for enhanced photoelectrochemical performance
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2021.07.085
Abstract: Abstract Constructing core/shell heterojunction has always been an effective strategy for photoelectrochemical (PEC) water splitting owing to special morphology characterization and band structure. Herein, we synthesized a series of In2O3/In2S3 core/shell structure photoanodes via a… read more here.
Keywords: in2o3; performance; fabrication in2o3; in2o3 in2s3 ... See more keywords
Stable and efficient air-processed perovskite solar cells employing low-temperature processed compact In2O3 thin films as electron transport materials
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.155460
Abstract: Abstract Perovskite solar cells (PSCs) have achieved remarkable power conversion efficiencies (PCEs) owing to their extraordinary optoelectronic properties. Electron transporting layer (ETL) has been proved to have a significant influence on the photovoltaic performance and… read more here.
Keywords: in2o3 film; in2o3; compact in2o3; air processed ... See more keywords
Heterojunction formation in In2O3–NiO nanocomposites: Towards high specific capacitance
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.155840
Abstract: Abstract This study focuses on (In2O3)x(NiO)100-x nanocomposites intended to be used in supercapacitors as electrode materials. Nanocomposites with different ratios of NiO and In2O3 have been synthesized and characterized using XRD, FTIR, TEM and UV–visible… read more here.
Keywords: in2o3; in2o3 nio; specific capacitance; nio 100 ... See more keywords
Synthesis and NO2 sensing performances of CuO nanoparticles loaded In2O3 hollow spheres
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.155857
Abstract: Abstract CuO nanoparticles loaded In2O3 hollow sphere (CuO–In2O3) was synthesized via soft template method. The microstructure, phase composition and element distribution of CuO–In2O3 were analyzed by SEM, XRD, HRTEM and XPS. The NO2 sensing performance… read more here.
Keywords: in2o3; nanoparticles loaded; cuo in2o3; cuo nanoparticles ... See more keywords
Vapor-phase modulated sphere-like In2O3@N-C complexes for improving gas sensitivity
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.158702
Abstract: Abstract Sensitivity is a challenging issue for most gas sensors in detecting volatile organic compounds (VOCs). In this study, an alternative ethanol chemosensor based on In2O3@N-C nanospheres (NSs) was synthesized successfully through a simple vapor-phase… read more here.
Keywords: in2o3; sensor; gas sensitivity; sensitivity ... See more keywords
Flower-like In2O3 modified by reduced graphene oxide sheets serving as a highly sensitive gas sensor for trace NO2 detection.
Sign Up to like & getrecommendations! Published in 2017 at "Journal of colloid and interface science"
DOI: 10.1016/j.jcis.2017.05.053
Abstract: In this work, we described gas sensors based on the materials composed of hierarchical flower-likeIn2O3 and reduced graphene oxide (rGO), which were fabricated by a facile one-step hydrothermal method. The rGO-In2O3 composites exhibited enhanced sensing… read more here.
Keywords: in2o3; rgo; rgo in2o3; gas ... See more keywords
Fabrication of MOF-derived tubular In2O3@SnIn4S8 hybrid: Heterojunction formation and promoted photocatalytic reduction of Cr(VI) under visible light.
Sign Up to like & getrecommendations! Published in 2021 at "Journal of colloid and interface science"
DOI: 10.1016/j.jcis.2021.02.121
Abstract: Tubular In2O3@SnIn4S8 hierarchical hybrid photocatalyst was firstly fabricated by a two-step method. The morphology and composition were characterized by scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The XRD results show… read more here.
Keywords: in2o3; snin4s8 hybrid; tubular in2o3; in2o3 snin4s8 ... See more keywords