Influence of Machining Parameters on Machinability of Inconel 718—A Review
Sign Up to like & getrecommendations! Published in 2022 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202200202
Abstract: Ni‐based superalloy Inconel 718 is renowned owing to its admirable physical and mechanical properties at higher temperatures. Various industries including aerospace and automobile are using this superalloy in gas turbines and other components. Meanwhile, the… read more here.
Keywords: review; influence machining; machinability inconel; machining parameters ... See more keywords
On the Tensile Properties of Inconel 718 Fabricated by EBM for As-Built and Heat-Treated Components
Sign Up to like & getrecommendations! Published in 2018 at "Metallurgical and Materials Transactions B"
DOI: 10.1007/s11663-018-1407-4
Abstract: Analysis of mechanical properties of Nickel-based superalloy (Inconel 718) components fabricated by additive manufacturing using electron beam melting is presented for two conditions: as-built and heat-treated, and for different sets of processing parameters. The average… read more here.
Keywords: built heat; inconel 718; treated components; tensile properties ... See more keywords
Microstructures, Forming Limit and Failure Analyses of Inconel 718 Sheets for Fabrication of Aerospace Components
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2547-4
Abstract: Abstract Recently, aerospace industries have shown increasing interest in forming limits of Inconel 718 sheet metals, which can be utilised in designing tools and selection of process parameters for successful fabrication of components. In the… read more here.
Keywords: inconel 718; microstructures forming; forming limit; strain ... See more keywords
An Investigation of the Wear Performance of Aged Inconel 718 Superalloy by the Fuzzy Logic Approach
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04016-z
Abstract: In this study, the effects of δ, γ′ and γ″ phases on the microstructure and wear behavior of Inconel 718 alloy, produced by powder metallurgy technique, were analyzed experimentally and a fuzzy logic model was… read more here.
Keywords: inconel 718; model; metallurgy; 718 alloy ... See more keywords
Assessing Mechanical Behaviors of Additive Manufactured Alternating Layers of Inconel-718/H13 Tool Steel
Sign Up to like & getrecommendations! Published in 2018 at "JOM"
DOI: 10.1007/s11837-018-2991-0
Abstract: An H13 (high-strength, low-ductility) tool steel die will fail due to compressive high cycle fatigue. If the die is manufactured by direct metal deposition and layered with Inconel-718 (low-strength, high-ductility), it may impact the mechanical… read more here.
Keywords: additive manufactured; strength; inconel 718; tool steel ... See more keywords
Microstructural Evolution of Inconel 718 During Pancake Forging
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01645-9
Abstract: Pancake forging of Inconel 718 was performed using a hydraulic press at temperature of 1273 and 1323 K. The effect of forging temperature on the microstructure of the pancakes was studied using optical microscopy. Variation in… read more here.
Keywords: inconel 718; evolution inconel; microstructural evolution; pancake forging ... See more keywords
Machining of Inconel 718 Using Coated WC Tool: Effects of Cutting Speed on Chip Morphology and Mechanisms of Tool Wear
Sign Up to like & getrecommendations! Published in 2019 at "Arabian Journal for Science and Engineering"
DOI: 10.1007/s13369-019-04171-4
Abstract: Inconel 718 is a nickel-based superalloy extensively used in aerospace industries for its excellent physical, mechanical and chemical properties. Poor thermal conductivity, high toughness and strong work hardening tendency of this alloy adversely affect its… read more here.
Keywords: inconel 718; coated tool; tool; tool wear ... See more keywords
Comprehensive Microstructural Evaluation of Precipitation in Inconel 718
Sign Up to like & getrecommendations! Published in 2019 at "Metallography, Microstructure, and Analysis"
DOI: 10.1007/s13632-018-00513-0
Abstract: AbstractRecent advances in industries require materials with greater strength at higher temperatures without failure in service. Inconel 718 is a precipitation strengthened Nickel–iron-based superalloy for application at high temperatures. In view of this, the present… read more here.
Keywords: precipitation inconel; inconel 718; comprehensive microstructural; precipitation ... See more keywords
Effect of Magnesium and Calcium Addition on Carbides Characterizations and Anisotropy Ductile Fracture of Inconel 718
Sign Up to like & getrecommendations! Published in 2018 at "Metallography, Microstructure, and Analysis"
DOI: 10.1007/s13632-018-0449-y
Abstract: Inconel 718 modified by magnesium and calcium was investigated in order to improve the ductile fracture properties of the alloy. Three different types of Inconel 718 containing 50 ppm Mg, 40 ppm Ca, and no trace elements were prepared… read more here.
Keywords: ductile fracture; magnesium calcium; inconel 718;
Temperature-mediated tribological characteristics of 40CrNiMoA steel and Inconel 718 alloy during sliding against Si3N4 counterparts
Sign Up to like & getrecommendations! Published in 2020 at "Friction"
DOI: 10.1007/s40544-020-0455-3
Abstract: A comparative evaluation of the friction and wear behaviors of 40CrNiMoA steel and Inconel 718 alloy sliding against Si 3 N 4 counterparts was conducted over a large temperature range from room temperature (RT) to… read more here.
Keywords: inconel 718; 40crnimoa steel; temperature; alloy sliding ... See more keywords
Effect of miniaturization and surface roughness on the mechanical properties of the electron beam melted superalloy Inconel®718
Sign Up to like & getrecommendations! Published in 2019 at "Progress in Additive Manufacturing"
DOI: 10.1007/s40964-019-00101-w
Abstract: In this work, the Ni-based super alloy Inconel 718 manufactured via electron beam melting is investigated. Typical microstructure of Inconel 718, which was processed by electron beam melting, consists of columnar oriented dendritic structure with strong texture… read more here.
Keywords: inconel 718; surface roughness; surface; mechanical properties ... See more keywords