Articles with "induced failure" as a keyword



Photo from wikipedia

Modelling of high strain rate adiabatic shear banding induced failure: A comparison of two approaches

Sign Up to like & get
recommendations!
Published in 2017 at "International Journal of Impact Engineering"

DOI: 10.1016/j.ijimpeng.2017.02.024

Abstract: The objective of the present work is to compare two different models aiming at numerically reproducing Adiabatic Shear Banding (ASB) assisted failure. ASB is herein considered as a deterioration mechanism whose consequences in the material… read more here.

Keywords: adiabatic shear; type model; shear banding; model ... See more keywords
Photo from wikipedia

Residual stress induced failure of Ti-6Al-4V/Si3N4 joints brazed with Ag-Cu-Ti filler: The effects of brazing zone’s elasto-plasticity and ceramics' intrinsic properties

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of The European Ceramic Society"

DOI: 10.1016/j.jeurceramsoc.2021.06.038

Abstract: Abstract The residual-stress induced failure of Ti-6Al-4V/Si3N4 joints brazed with two different Si3N4 ceramics possessing different intrinsic properties was elucidated through experimental and finite-element (FE) thermo-mechanical simulations incorporating the local elasto-plastic properties of the as-received… read more here.

Keywords: induced failure; filler; residual stress; si3n4 ... See more keywords
Photo by jentheodore from unsplash

A theoretical analysis to current exponent variation regularity and electromigration-induced failure

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of Applied Physics"

DOI: 10.1063/1.4975348

Abstract: The electric current exponent, typically with j−n form, is a key parameter to predict electromigration-induced failure lifetime. It is experimentally observed that the current exponent depends on different damage mechanisms. In the current research, the… read more here.

Keywords: variation regularity; current exponent; electromigration induced; exponent variation ... See more keywords
Photo from wikipedia

Feedback-Induced Failure of High-Power Diode Lasers

Sign Up to like & get
recommendations!
Published in 2018 at "IEEE Journal of Quantum Electronics"

DOI: 10.1109/jqe.2018.2873073

Abstract: Catastrophic failure of diode pumps in laser systems exhibiting back-irradiance is a common occurrence yet poorly understood. Prior paper has established boundaries for time-zero failures, but these results cannot be used to deduce safe back-irradiance… read more here.

Keywords: diode; back irradiance; failure; feedback induced ... See more keywords
Photo from wikipedia

Mining-Induced Failure Criteria of Interactional Hard Roof Structures: A Case Study

Sign Up to like & get
recommendations!
Published in 2019 at "Energies"

DOI: 10.3390/en12153016

Abstract: Due to the additional abutment stress, interactional hard roof structures (IHRS) affect the normal operation of the coal production system in underground mining. The movement of IHRS may result in security problems, such as the… read more here.

Keywords: mining induced; induced failure; key structure; failure ... See more keywords
Photo from wikipedia

Multiple Fatigue Failure Behaviors and Long-Life Prediction Approach of Carburized Cr-Ni Steel with Variable Stress Ratio

Sign Up to like & get
recommendations!
Published in 2017 at "Materials"

DOI: 10.3390/ma10091084

Abstract: Axial loading tests with stress ratios R of −1, 0 and 0.3 were performed to examine the fatigue failure behavior of a carburized Cr-Ni steel in the long-life regime from 104 to 108 cycles. Results… read more here.

Keywords: long life; steel; stress; failure ... See more keywords
Photo by rocinante_11 from unsplash

Effect of Grain Structure and Ni/Au-UBM Layer on Electromigration-Induced Failure Mechanism in Sn-3.0Ag-0.5Cu Solder Joints

Sign Up to like & get
recommendations!
Published in 2022 at "Micromachines"

DOI: 10.3390/mi13060953

Abstract: The development of advanced electronic devices leads to highly miniaturized interconnect circuits (ICs), which significantly increases the electromigration (EM) phenomenon of solder and circuits due to higher current density. The electromigration of solder joints under… read more here.

Keywords: induced failure; solder; ubm layer; solder bumps ... See more keywords