Hot Deformation and Dynamic Recrystallization of 18%Mn Twinning‐Induced Plasticity Steels
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202000098
Abstract: The deformation behavior of 18%Mn twinning‐induced plasticity (TWIP) steels with 0.4%C or 0.6%C is studied by means of isothermal compression tests in the temperature range of 973–1373 K at the strain rates of 10−3–10−1 s−1. The hot… read more here.
Keywords: twinning induced; dynamic recrystallization; induced plasticity; drx ... See more keywords
Transmission Electron Microscopy Characterization and High‐Resolution Modeling of Second‐Phase Particles of V‐ and Ti‐Containing Twinning‐Induced Plasticity Steel under Uniaxial Hot‐Tensile Condition
Sign Up to like & getrecommendations! Published in 2019 at "steel research international"
DOI: 10.1002/srin.201900098
Abstract: Composition and crystallographic nature of precipitates in microalloyed advanced high‐strength steels (AHSS) greatly influence their microstructure and mechanical behavior. Second‐phase precipitation in a high‐Mn twinning‐induced plasticity (TWIP) steel single microalloyed with V and Ti under… read more here.
Keywords: twinning induced; microscopy; induced plasticity; second phase ... See more keywords
Study on the mechanical behavior of twinning-induced plasticity steel processed by warm forging and annealing
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science"
DOI: 10.1007/s10853-018-2597-5
Abstract: The microstructures and mechanical properties of a 30Mn–3Al–3Si twinning-induced plasticity (TWIP) steel in the warmly forged and annealed states were investigated in the present study. It is shown that the as-forged and low-temperature annealed steels… read more here.
Keywords: twinning induced; temperature annealed; steel; induced plasticity ... See more keywords
A phenomenological description of shape memory alloy transformation induced plasticity
Sign Up to like & getrecommendations! Published in 2018 at "Meccanica"
DOI: 10.1007/s11012-018-0836-0
Abstract: Transformation induced plasticity is defined as the plastic flow arising from solid state phase transformation processes involving volume and/or shape changes without overlapping the yield surface. This phenomenon occurs in shape memory alloys (SMAs) having… read more here.
Keywords: transformation induced; shape memory; induced plasticity; transformation ... See more keywords
Mitigating Cutting-Induced Plasticity Errors in the Determination of Residual Stress at Cold Expanded Holes Using the Contour Method
Sign Up to like & getrecommendations! Published in 2021 at "Experimental Mechanics"
DOI: 10.1007/s11340-021-00756-z
Abstract: The split sleeve cold expansion process is widely used to improve the fatigue life of fastener holes in the civil and military aircraft industry. The process introduces beneficial compressive residual stresses around the processed hole,… read more here.
Keywords: induced plasticity; residual stress; cutting induced; plasticity ... See more keywords
Effect of Aluminum and Grain Size on the Fracture Behavior of Twinning-Induced Plasticity Steels
Sign Up to like & getrecommendations! Published in 2018 at "Metallurgical and Materials Transactions B"
DOI: 10.1007/s11663-018-1346-0
Abstract: The present study investigates the effect of Al and grain size on the notch sensitivity and fracture toughness of twinning-induced plasticity (TWIP) steels. It is evident that the notch sensitivity and fracture toughness of TWIP… read more here.
Keywords: twinning induced; fracture; effect; grain size ... See more keywords
Development of sub-grained α+β Ti alloy with high yield strength showing twinning- and transformation-induced plasticity
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.152102
Abstract: Abstract In this study, a Ti–3Mo–3Cr–2Fe–2Al alloy (α + β Ti alloy) showing twinning- and transformation-induced plasticity was investigated. The existence of α yielded fine-grained β phases. The β grains, comprising low-angle boundaries, produced a high yield… read more here.
Keywords: strength; induced plasticity; high yield; transformation induced ... See more keywords
Characterization of resistance spot welded transformation induced plasticity (TRIP) steels with different silicon and carbon contents
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2018.02.005
Abstract: Abstract This research work examines the influence of chemical composition and microstructure of 6 different transformation induced plasticity (TRIP) steels on the mechanical behavior of resistance spot weldments. The microstructure of the spot welds was… read more here.
Keywords: spot; transformation induced; resistance spot; induced plasticity ... See more keywords
Evidencing extrinsic stacking faults in twinning-induced plasticity steel
Sign Up to like & getrecommendations! Published in 2017 at "Materials Characterization"
DOI: 10.1016/j.matchar.2016.11.039
Abstract: Abstract In twinning induced plasticity (TWIP) steel, the question of what leads to the onset of twinning in grains whose 〈100〉 orientations are near parallel to the tensile axis at high tensile strains has not… read more here.
Keywords: twinning induced; stacking faults; extrinsic stacking; steel ... See more keywords
Revisit the role of deformation twins on the work-hardening behaviour of twinning-induced plasticity steels
Sign Up to like & getrecommendations! Published in 2018 at "Scripta Materialia"
DOI: 10.1016/j.scriptamat.2017.08.017
Abstract: Abstract The present study found that the work-hardening rate and dislocation density in a twinning-induced plasticity (TWIP) steel deformed at 373 K and 473 K are comparable to that deformed at 298 K, but deformation twins are considerably… read more here.
Keywords: deformation twins; twinning induced; work hardening; induced plasticity ... See more keywords
Recovery of tensile properties of twinning-induced plasticity steel via electropulsing induced void healing
Sign Up to like & getrecommendations! Published in 2018 at "Scripta Materialia"
DOI: 10.1016/j.scriptamat.2018.01.008
Abstract: The effects of electropulsing treatment (EPT) and annealing on the tensile behaviors of twinning-induced plasticity (TWIP) steel after interrupted tension are compared. It is found that EFT effectively restores the tensile property of specimens with… read more here.
Keywords: twinning induced; steel; induced plasticity; recovery tensile ... See more keywords