Electromagnetic-Thermal Modeling of Induction Heating of Moving Wire
Sign Up to like & getrecommendations! Published in 2017 at "Heat Transfer Research"
DOI: 10.1002/htj.21201
Abstract: The strength in a high carbon wire is attributed to the pearlitic microstructure, which is required for ease of wire drawing. During cold drawing of high carbon steel wires, residual stress develops which has to… read more here.
Keywords: heating moving; induction heating; moving wire; wire ... See more keywords
Strategic Fast Induction Heating to Combat Hysteresis Barriers in a Flexible MOF for Rapid CO2 Desorption in Biogas Upgrading.
Sign Up to like & getrecommendations! Published in 2023 at "Small"
DOI: 10.1002/smll.202302893
Abstract: A major challenge in Cyclic Swing Separation using flexible adsorbents that have high equilibrium CO2 adsorption capacity is their very low-pressure hysteresis that hinders efficient desorption. Mg-Gallate MOF is such a flexible adsorbent that only… read more here.
Keywords: co2 desorption; mof; desorption; induction heating ... See more keywords
Residual Stress Control on Bearing Steel by Surface Cooled Induction Heating Fast Tempering
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04756-3
Abstract: In order to reduce the amount of CO 2 emission during carburizing while keeping the advantages of case hardening, a surface cooled induction heating fast tempering process has been developed for the production of bearing… read more here.
Keywords: surface cooled; cooled induction; induction heating; surface ... See more keywords
Hybrid Additive Manufacturing Technology: Induction Heating Cold Spray—Part I: Fundamentals of Deposition Process
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-020-01005-w
Abstract: The prevention of delamination of soft and ductile materials from hard substrates is a challenge when using the cold spray process. As a potential solution to this issue, a tunable hybrid additive manufacturing process was… read more here.
Keywords: deposition; induction heating; process; cold spray ... See more keywords
Analytical modeling and sensitivity analysis of the temperature distribution in the planar scanning induction heating based on 2D moving heat source
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-019-0948-z
Abstract: This paper presents an analytical modeling method of the temperature evolution in the planar scanning induction heating, which can be applied into various heat treatment processes. Due to the uneven distribution and hard control of… read more here.
Keywords: temperature; planar scanning; induction heating; scanning induction ... See more keywords
High-frequency induction heating for increase of flow length in polymer/metal hybrid molding
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-019-1031-5
Abstract: Recent trends of miniaturization and multi-functionality in electrical parts have driven development of molded interconnect devices (MIDs) that contain conductive tracks on a nonconductive base. This study aims to develop polymer/metal hybrid molding technology to… read more here.
Keywords: metal; induction heating; flow length; increase flow ... See more keywords
A Novel Power Control Technique for Series Resonant Inverter-Fed Induction Heating System with Fuzzy-Aided Digital Pulse Density Modulation Scheme
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Fuzzy Systems"
DOI: 10.1007/s40815-017-0408-9
Abstract: The research on Induction heating aided by power electronic control system is so vivacious in recent past. The selection of switching techniques remains to be the bottleneck for power engineering research as inappropriate selection may… read more here.
Keywords: system; induction heating; control; density ... See more keywords
An asynchronous dual-frequency induction heating process for bevel gears
Sign Up to like & getrecommendations! Published in 2020 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2020.114981
Abstract: Abstract For parts with complex structures such as bevel gears, electromagnetic heating is an environmental friendly heat-treatment method of high efficiency. However, since high-frequency induction heating is restricted by the unique rung and proximity effects,… read more here.
Keywords: dual frequency; frequency induction; frequency; induction heating ... See more keywords
All-utensil domestic induction heating system
Sign Up to like & getrecommendations! Published in 2019 at "Energy Conversion and Management"
DOI: 10.1016/j.enconman.2019.05.093
Abstract: Abstract This paper proposes and implements an all-utensil domestic induction heating system, which can effectively heat utensils made by ferromagnetic conductive (FC), non-ferromagnetic conductive (NFC) and non-ferromagnetic non-conductive (NFNC) materials. The proposed system consists of… read more here.
Keywords: system; utensil domestic; heating system; induction heating ... See more keywords
Effect of induction heating on flaw generation and expansion
Sign Up to like & getrecommendations! Published in 2018 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2018.04.116
Abstract: Abstract During acceptance tests phase of plasma facing components, main performance requirements are checked. For divertor application, it is important to achieve an adequate heat exhaust capability. For ITER divertor, defects localized at tungsten to… read more here.
Keywords: induction heating; heat; effect; generation expansion ... See more keywords
Characterising the impact of castellations on the efficiency of induction heating during testing in the HIVE facility
Sign Up to like & getrecommendations! Published in 2019 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2019.03.097
Abstract: Abstract High heat flux testing is a vital part of engineering component validation for fusion technology. The Heat by Induction to Verify Extremes (HIVE) facility is designed to provide a practical avenue for this aspect… read more here.
Keywords: hive facility; characterising impact; induction heating; induction ... See more keywords