Energy eigenvalues and neural network analysis for broken bars fault diagnosis in induction machine under variable load: experimental study
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Ambient Intelligence and Humanized Computing"
DOI: 10.1007/s12652-021-03172-2
Abstract: In this paper, a technique primarily based on the discrete wavelet transform (DWT) and the slip associated with a neural network (NN) for classification and fault detection of broken rotor bars in an induction machine… read more here.
Keywords: neural network; induction machine; analysis; load ... See more keywords
Parameters identification of a brushless doubly fed induction machine using pseudo-random binary signal excitation signal for recursive least squares method
Sign Up to like & getrecommendations! Published in 2017 at "Iet Electric Power Applications"
DOI: 10.1049/iet-epa.2017.0083
Abstract: Accurate brushless doubly fed induction machine (BDFIM) control is considered as a good alternative to traditional generators. Therefore, the knowledge of the parameters accuracy is necessary to design high-performance drives. In this study, an offline… read more here.
Keywords: brushless doubly; induction machine; doubly fed; fed induction ... See more keywords
Control of Three-Phase Induction Machine Drives During Open-Circuit Fault: A Review
Sign Up to like & getrecommendations! Published in 2020 at "Iete Journal of Research"
DOI: 10.1080/03772063.2020.1724833
Abstract: ABSTRACTThree-Phase Induction Machines (TPIMs) are widely used in industrial drive systems. The popularity of TPIMs is due to their simplicity, robustness, low size and cost. In harsh industrial en... read more here.
Keywords: phase; induction machine; three phase; phase induction ... See more keywords
Brushless Induction Excited Synchronous Generator With Induction Machine Operating in Plugging Mode
Sign Up to like & getrecommendations! Published in 2018 at "IEEE Transactions on Industry Applications"
DOI: 10.1109/poweri.2016.8077438
Abstract: This paper describes a new brushless and magnet-less synchronous generator where an induction machine (IM) is embedded in a synchronous machine (SM) to provide the excitation. Hence, this machine is named as brushless induction excited… read more here.
Keywords: machine; synchronous generator; generator induction; induction machine ... See more keywords
An Improved Horizon-1 Finite-Control-Set Model-Predictive Current Control Design for an Induction Machine With Integrated Anti-Windup
Sign Up to like & getrecommendations! Published in 2023 at "IEEE Transactions on Control Systems Technology"
DOI: 10.1109/tcst.2022.3193500
Abstract: In this letter, we propose a novel approach to integrating disturbance rejection within a finite-control-set model-predictive-control (FCS-MPC) framework for current/torque control of an induction machine (IM). The technique derived utilizes disturbance estimation, but, by utilizing… read more here.
Keywords: set model; finite control; induction machine; control set ... See more keywords
Loss Minimization Control Strategy for Linear Induction Machine in Urban Transit Considering Normal Force
Sign Up to like & getrecommendations! Published in 2019 at "IEEE Transactions on Industry Applications"
DOI: 10.1109/tia.2018.2873575
Abstract: Linear induction machine (LIM) in urban transit suffers greatly from poor efficiency due to the large air-gap length and the end-effects, including both transversal edge- and longitudinal end-effects caused by the cut-open magnetic circuit and… read more here.
Keywords: normal force; loss; force; induction machine ... See more keywords
48 V Starter-Generator Induction Machine With Pole-Changing Windings
Sign Up to like & getrecommendations! Published in 2020 at "IEEE Transactions on Industry Applications"
DOI: 10.1109/tia.2020.3012615
Abstract: An electronic pole-changing winding induction machine with eight and four poles for a 48-V starter-generator application is studied in this article. Starter-generators require high torque capability for short durations at low speed for cranking, a… read more here.
Keywords: induction machine; changing windings; machine; pole changing ... See more keywords
Application of Sliding Switching Functions in Backstepping Based Speed Observer of Induction Machine
Sign Up to like & getrecommendations! Published in 2020 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2019.2914645
Abstract: This paper presents an analysis of the speed observer, which is based on the backstepping and sliding mode approach. The speed observer structure is based on the extended mathematical model of an induction machine. The… read more here.
Keywords: speed; induction machine; speed observer; observer structure ... See more keywords
Nonadaptive Rotor Speed Estimation of Induction Machine in an Adaptive Full-Order Observer
Sign Up to like & getrecommendations! Published in 2022 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2021.3066919
Abstract: In the sensorless control system of an induction machine, the rotor speed value is not measured but reconstructed by an observer structure. The rotor speed value can be reconstructed by the classical adaptive law with… read more here.
Keywords: speed; rotor speed; induction machine;
Multi-Scale Induction Machine Model in the Phase Domain With Constant Inner Impedance
Sign Up to like & getrecommendations! Published in 2020 at "IEEE Transactions on Power Systems"
DOI: 10.1109/tpwrs.2019.2947535
Abstract: An efficient and accurate multi-scale induction machine model for simulating diverse transients in power systems is developed and validated. Voltages, currents, and flux linkages are described through analytic signals that consist of real in-phase and… read more here.
Keywords: phase domain; model; induction machine; phase ... See more keywords
Analytical Model of Cage Induction Machine Dedicated to the Study of the Inner Race Bearing Fault
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Electrical and Computer Engineering"
DOI: 10.11591/ijece.v8i1.pp458-471
Abstract: This paper presents a new analytical model for inner bearing raceway defect. The model is based on the presentation of different machine inductances as Fourier series without any kind of reference frame transformation. The proposed… read more here.
Keywords: analytical model; model cage; induction machine; model ... See more keywords