Influence of Cu Addition and Microstructural Configuration on the Creep Resistance and Mechanical Properties of an Fe‐Based α/α′/α″ Superalloy
Sign Up to like & getrecommendations! Published in 2023 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202201652
Abstract: Introducing Cu nanoparticles is an effective mechanism for strengthening and toughening Fe‐based materials such as ultra‐high‐strength steels. Herein, the effect of Cu on the mechanical properties of a novel Fe‐based α/α′/α″ superalloy is studied. Compared… read more here.
Keywords: configuration; influence addition; creep; based superalloy ... See more keywords
Influence of Ca–La and Cr-addition on the structure and magnetic characteristics of nanocrystalline Sr-hexaferrite powder
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-8051-7
Abstract: Sr–Ca hexaferrite nanopowders with a nominal chemical composition of Sr1−xCaxFe12O19, Sr1−xCaxFe11.5Cr0.5O19 and Sr0.85−xCaxLa0.15Fe11.5Cr0.5O19, with x = 0, 0.1, 0.3, and 0.5, were synthesized via sol–gel auto combustion method. Structural and phase formation of the samples were evaluated… read more here.
Keywords: structure magnetic; characteristics nanocrystalline; 5cr0 5o19; influence addition ... See more keywords
Influence of Li Addition on the Microstructures and Mechanical Properties of Mg–Li Alloys
Sign Up to like & getrecommendations! Published in 2019 at "Metals and Materials International"
DOI: 10.1007/s12540-019-00528-4
Abstract: In this study, Mg-xLi (x = 0, 1, 2, 3 and 5 wt%) alloys have been extruded to examine the role of Li content on microstructures and tensile properties. The results revealed that Li addition increased the… read more here.
Keywords: addition; microstructures mechanical; prismatic slip; addition microstructures ... See more keywords
The influence of Ba addition on thermal stability and catalytic activity of Cu-based mixed oxide
Sign Up to like & getrecommendations! Published in 2020 at "Catalysis Today"
DOI: 10.1016/j.cattod.2020.06.052
Abstract: Abstract Catalytic reduction of NO by CO was studied over La2-xBaxCuO4 (x = 0.0 or 0.4) mixed oxides prepared by coprecipitation method. The catalysts were characterized by X ray diffraction (XRD), O2 temperature-programmed desorption (O2-TPD),… read more here.
Keywords: stability catalytic; influence addition; addition thermal; activity ... See more keywords
Influence of Cr and W addition on microstructure and mechanical properties of multi-step sintered Mo2FeB2-based cermets
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.01.111
Abstract: Abstract The influence of Cr and W addition on microstructure and mechanical properties of Mo2FeB2-based cermets, prepared by multi-step sintering, is systematically evaluated by XRD, SEM, EDS, and TEM. After liquid-phase sintering, the final microstructure… read more here.
Keywords: addition microstructure; based cermets; mo2feb2 based; influence addition ... See more keywords
Influence of the addition of phosphogypsum on some properties of ceramic tiles
Sign Up to like & getrecommendations! Published in 2018 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2018.04.131
Abstract: Abstract Phosphogypsum (PG) is a waste from phosphoric acid production, and this work evaluates the use of PG as an additive in ceramic manufacturing. Ceramic samples were produced by adding different concentrations of PG (5,… read more here.
Keywords: properties ceramic; influence addition; phosphogypsum; phosphogypsum properties ... See more keywords
Influence of Mn addition on the microstructure and mechanical properties of a directionally solidified γ-TiAl alloy
Sign Up to like & getrecommendations! Published in 2018 at "Materials Characterization"
DOI: 10.1016/j.matchar.2018.01.029
Abstract: Abstract TiAl alloys with nominal compositions of Ti-47Al-2Nb-2Cr-(0, 1, 3, 5)Mn were prepared via electromagnetic cold crucible directional solidification (ECCDS), and the influence of Mn addition on the microstructure and mechanical properties of the alloys… read more here.
Keywords: addition; addition microstructure; microstructure mechanical; influence addition ... See more keywords
Influence of Addition of Polycarboxylate-Based Superplasticizer on Properties of High Performance Concrete
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials in Civil Engineering"
DOI: 10.1061/(asce)mt.1943-5533.0003025
Abstract: AbstractNowadays, polycarboxylate-based (PCA) superplasticizer (SP) has become the basic ingredient to prepare high-performance concrete (HPC). PCA SP with carboxylic sulfonic groups and long poly ... read more here.
Keywords: influence addition; superplasticizer; polycarboxylate based; performance concrete ... See more keywords
Influence of the addition of chitin nanocrystals on the characteristics of cellulose acetate films
Sign Up to like & getrecommendations! Published in 2021 at "Polimery"
DOI: 10.14314/polimery.2021.2.2
Abstract: The present study deals with chitin nanocrystal (CHNC)-reinforced cellulose acetate (CA) films formed by the solvent casting method that makes use of poly(ethylene glycol) (PEG) as a plasticizing agent. Three different films containing various mass… read more here.
Keywords: cellulose acetate; influence addition; acetate films; chitin ... See more keywords
The influence of the addition of Agaricus bisporus to the diet on the volatile profile of lamb meat
Sign Up to like & getrecommendations! Published in 2023 at "Veterinarski arhiv"
DOI: 10.24099/vet.arhiv.1964
Abstract: The aim of the research was to qualitatively determine volatile aroma compounds in the M. longissimus dorsi of lambs. The research included a total of 30 lamb carcasses divided into three groups. The animals were… read more here.
Keywords: influence addition; addition agaricus; agaricus bisporus; lamb meat ... See more keywords
Influence of Zr addition on the corrosion behavior of biomedical PIM Ti-16Nb alloy in SBF
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Materials Research"
DOI: 10.3139/146.111722
Abstract: Abstract In this study, the effect of Zr content on the corrosion resistance of Ti-16Nb alloy produced by powder injection molding was investigated. Electrochemical corrosion tests were carried out in simulated body fluid using electrochemical… read more here.
Keywords: 16nb alloy; alloy; influence addition; corrosion ... See more keywords