The Influence of Additives on the Interfacial Bonding Mechanisms Between Natural Fibre and Biopolymer Composites
Sign Up to like & getrecommendations! Published in 2018 at "Macromolecular Research"
DOI: 10.1007/s13233-018-6119-8
Abstract: There has not been extensive research into the subjects of the interfacial bonding quality and the interaction mechanisms of biopolymers and natural fibres. Attempts have been made to incorporate natural fibres/fillers (biofibres) into the manufacture… read more here.
Keywords: biopolymer; bonding quality; interfacial bonding; bio composites ... See more keywords
The influence of the additives of expired paracetamol (PR) and naproxen (NP) on the thermal behaviour of high volatile bituminous coal (HVBC) and the composition of material extracted from the zones of its plastic layer
Sign Up to like & getrecommendations! Published in 2020 at "Fuel"
DOI: 10.1016/j.fuel.2020.117752
Abstract: Abstract The influence of 2 wt% additives having functional groups with various mesomeric effects, namely expired paracetamol (PR) and naproxen (NP), on the course of pyrolysis and carbonization processes of a commercial sample of high volatile… read more here.
Keywords: expired paracetamol; volatile bituminous; high volatile; paracetamol naproxen ... See more keywords
The influence of additives on the fate of plastics in the marine environment, exemplified with barium sulphate.
Sign Up to like & getrecommendations! Published in 2020 at "Marine pollution bulletin"
DOI: 10.1016/j.marpolbul.2020.111352
Abstract: With an inherent density marginally below that of seawater, polyolefins (polyethylene-polypropylene) are predicted to float or undergo beaching in the marine environment. Polyolefins commonly observed on the seabed, therefore, require additional considerations that are usually… read more here.
Keywords: marine environment; plastics marine; additives fate; density ... See more keywords
Influence of additives and concentration of WC nanoparticles on properties of WC−Cu composite prepared by electroplating
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(20)65322-5
Abstract: Abstract The effects of additives (polyethylene glycol (PEG), sodium dodecyl sulfate (SDS)) and WC nano-powder on the microstructure, relative density, hardness and electrical conductivity of electroplated WC−Cu composite were investigated. The preparation mechanism was also… read more here.
Keywords: concentration nanoparticles; additives concentration; properties composite; increase ... See more keywords
Studying the Influence of Additives on Binding Cellulose Fibers by IR Spectroscopy
Sign Up to like & getrecommendations! Published in 2019 at "Glass Physics and Chemistry"
DOI: 10.1134/s1087659619060129
Abstract: The paper is devoted to the investigation of the polymer additives’ influence on the strength properties of a sheet and to the analysis of the absorption bands related to the vibration of the groups that… read more here.
Keywords: binding cellulose; spectroscopy; influence; studying influence ... See more keywords
Influence of Some Additives on the Properties of OPC Solidified Sandy Silt
Sign Up to like & getrecommendations! Published in 2021 at "Applied Sciences"
DOI: 10.3390/app11167252
Abstract: The ordinary Portland cement (OPC)-based solidification process is used extensively to reinforce soils due to its available and good bonding properties. Alternative products are used in cementitious materials to enhance the strength and to reduce… read more here.
Keywords: solidified sandy; properties opc; sandy silt; influence additives ... See more keywords
Assessment of the Influence of Additives on the Mechanical Properties and Machinability of Al-11%Si Cast Alloys: Application of DOE and ANOVA Methods
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15093297
Abstract: In the present study, the statistical design of experiments (DOE) method was applied to study and control the properties of near-eutectic Al-11%Si alloys. In this study, we developed regression equations between response variables, including hardness,… read more here.
Keywords: additives mechanical; mechanical properties; influence additives; properties machinability ... See more keywords