Influence of sintering aids and excess Lithium on the conductivity of perovskite-type Li3/8Sr7/16Zr1/4Nb3/4O3 solid electrolyte
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.01.097
Abstract: Abstract Perovskite-structured Li 3/8 Sr 7/16 Zr 1/4 Nb 3/4 O 3 solid-state Lithium-conductors were prepared by conventional solid-state reaction method. Influence of sintering aids (Al 2 O 3 , B 2 O 3 )… read more here.
Keywords: excess lithium; influence sintering; aids excess; conductivity ... See more keywords
Influence of sintering process and interfacial bonding mechanism on the mechanical properties of MgO–C refractories
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.03.263
Abstract: Abstract Two kinds of MgO–C refractories were separately prepared by carbon-embedded method and high-temperature nitridation. The phase compositions, microstructures and physical properties of heat-treated samples were investigated. Specially, the relationship between interface bonding and physical… read more here.
Keywords: influence sintering; process interfacial; mgo refractories; mechanical properties ... See more keywords
Influence of sintering temperature and graphene additives on the electrochemical performance of porous Li4Ti5O12 anode for lithium ion capacitor
Sign Up to like & getrecommendations! Published in 2017 at "Electrochimica Acta"
DOI: 10.1016/j.electacta.2017.07.014
Abstract: Abstract Porous L 4 Ti 5 O 12 (LTO) nanoparticles were prepared by a precursor directed hydrothermal method followed by sintering. The influence of sintering temperature and graphene additives on the microstructure evolution and electrochemical… read more here.
Keywords: influence sintering; temperature; graphene additives; graphene ... See more keywords
Influence of sintering atmosphere and BN additives on microstructure and properties of porous SiC ceramics
Sign Up to like & getrecommendations! Published in 2021 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2021.07.039
Abstract: Abstract The effects of the boron nitride (BN) content on the electrical, thermal, and mechanical properties of porous SiC ceramics were investigated in N2 and Ar atmospheres. The electrical resistivity was predominantly controlled by the… read more here.
Keywords: properties porous; sintering atmosphere; porous sic; sintered porous ... See more keywords
Influence of sintering methods on the mechanical properties of aluminium nanocomposites reinforced with carbonaceous compounds: A review
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Research and Technology"
DOI: 10.1016/j.jmrt.2019.01.026
Abstract: Abstract This paper succinctly reviews from the corpus of literature the reinforcement of aluminium with carbonaceous nanocompounds (CNTs, GNPs, graphenes etc.), with particular emphasis on the strength and ductility of the resulting composites based on… read more here.
Keywords: methods mechanical; carbonaceous nanocompounds; mechanical properties; properties aluminium ... See more keywords
The influence on sintering and properties of sodium niobate (NaNbO3) ceramics by “non-stoichiometric” precursor compositions
Sign Up to like & getrecommendations! Published in 2019 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2019.03.037
Abstract: Abstract NaNbO3 powders from different processing routes and various near equimolar concentrations of metal ions were sintered to ceramics and investigated concerning their structural and electric properties. The particle sizes obtained from two different conventional… read more here.
Keywords: spectroscopy; precursor; sintering properties; properties sodium ... See more keywords
Influence of sintering temperature on phase structure and electrical properties of 0.55Pb(Ni1/3Nb2/3)O3–0.45Pb(Zr0.3Ti0.7)O3 ceramics
Sign Up to like & getrecommendations! Published in 2017 at "Materials Research Bulletin"
DOI: 10.1016/j.materresbull.2017.04.015
Abstract: Abstract 0.55Pb(Ni 1/3 Nb 2/3 )O 3 –0.45Pb(Zr 0.3 Ti 0.7 )O 3 (abbreviated as PNN–PZT) piezoelectric ternary ceramics were prepared by conventional solid-state reaction techniques and sintered at 1200–1275 °C for 2 h. The influence of… read more here.
Keywords: phase; influence sintering; sintering temperature; pnn pzt ... See more keywords
Influence of sintering parameters on transparency of reactive SPSed Nd3+:YAG ceramics
Sign Up to like & getrecommendations! Published in 2021 at "Optical Materials"
DOI: 10.1016/j.optmat.2020.110760
Abstract: Abstract Fine-grained 4 at% Nd3+:YAG transparent ceramics were prepared by reactive spark plasma sintering using a two-step heating profile. The effect of key sintering parameters (heating rate, external pressure, sintering and post-annealing temperatures) on densification peculiarities,… read more here.
Keywords: yag ceramics; influence sintering; sintering parameters; nd3 yag ... See more keywords
Influence of Sintering Conditions and Nanosilicon Carbide Concentration on the Mechanical and Thermal Properties of Si3N4-Based Materials
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16052079
Abstract: In the work, silicon nitride ceramics (Si3N4) and silicon nitride reinforced by nano silicon carbide particles (Si3N4-nSiC) in amounts of 1–10 wt.% were investigated. The materials were obtained using two sintering regimes: under conditions of… read more here.
Keywords: silicon nitride; sintering conditions; concentration; nanosilicon carbide ... See more keywords