Evaluation of the injection moulding conditions in soy/nanoclay based composites
Sign Up to like & getrecommendations! Published in 2017 at "European Polymer Journal"
DOI: 10.1016/j.eurpolymj.2017.08.036
Abstract: Abstract Biocomposites, and generally bio-based plastics, are seen as a promising alternative to conventional plastics because they are based on renewable natural components (eco-friendly) with a lower cost. Biocomposites using soy protein and glycerol were… read more here.
Keywords: evaluation injection; nanoclay; mechanical properties; injection ... See more keywords
Molecular dynamics simulation method applied to nanocavities replication via injection moulding
Sign Up to like & getrecommendations! Published in 2017 at "International Communications in Heat and Mass Transfer"
DOI: 10.1016/j.icheatmasstransfer.2017.06.018
Abstract: Abstract Injection moulding is a promising manufacturing process for obtaining cost-effective plastic parts with nanostructured surfaces. However, replication of nanocavities is not a straightforward method because the large heat transfer that takes place at the… read more here.
Keywords: molecular dynamics; method; injection; replication ... See more keywords
Manufacturing and characterization of sustainable hybrid composites using sisal and hemp fibres as reinforcement of poly (lactic acid) via injection moulding
Sign Up to like & getrecommendations! Published in 2019 at "Industrial Crops and Products"
DOI: 10.1016/j.indcrop.2019.05.040
Abstract: Abstract Natural polymers based composites offers significant advantages over synthetic fibre reinforced petroleum matrix based composites with regard to biodegradability, biocompatibility, design flexibility and sustainability. This work reports for the first time manufacturing of hybrid… read more here.
Keywords: hybrid composites; sisal hemp; injection moulding; fibre ... See more keywords
Improvement of the replication quality of randomly micro-textured injection-moulding components using a multi-scale surface analysis
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2019.04.010
Abstract: Abstract In this work, the relations between the replication quality of random, coarse textured, surfaces with the injection-moulding process has been analysed through 3D areal characterisation techniques. The multi-scale surface approach has been applied to… read more here.
Keywords: injection; replication quality; injection moulding; surface ... See more keywords
Powder metal injection moulding and heat treatment of AZ81 Mg alloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2018.12.015
Abstract: Abstract Ongoing research has proven that Mg alloys can be introduced into the metal injection moulding process for the production of small parts in high quantities and of complex shape for medical as well as… read more here.
Keywords: heat; metal injection; heat treatment; injection moulding ... See more keywords
Rheological properties of irregular-shaped titanium-hydroxyapatite bimodal powder composite moulded by powder injection moulding
Sign Up to like & getrecommendations! Published in 2021 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2021.02.016
Abstract: Abstract This paper presents an alternative approach in powder injection moulding (PIM) process by highlighting the advantages of using irregular-shaped and bimodal size powder in Ti6Al4V-HA composite. An investigation on the rheological behaviour Ti6Al4V-HA feedstock… read more here.
Keywords: powder; injection moulding; irregular shaped; shaped ti6al4v ... See more keywords
Injection moulding of porous MAX phase Ti3SiC2 without using space-holder
Sign Up to like & getrecommendations! Published in 2020 at "Powder Technology"
DOI: 10.1016/j.powtec.2020.11.022
Abstract: Abstract Ti3SiC2 is one of the most studied MAX phase due to its unique combination of metallic and ceramic like properties. In this work, Powder Injection Moulding (PIM) is proposed as a new processing route… read more here.
Keywords: porous max; phase; max phase; injection moulding ... See more keywords
Design for eco-efficiency – a system of indicators and their application to the case of moulds for injection moulding
Sign Up to like & getrecommendations! Published in 2019 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2019.04.037
Abstract: Abstract Eco-efficiency is a prominent as well as promising approach for fostering sustainability by assessing the environmental impact and value of companies´ activities simultaneously. A lot of indicators to assess both pillars – environmental and… read more here.
Keywords: system; eco efficiency; moulds injection; injection moulding ... See more keywords
Effect of powder particle shape and size distributions on the properties of low-viscosity iron-based feedstocks used in low-pressure powder injection moulding
Sign Up to like & getrecommendations! Published in 2021 at "Powder Metallurgy"
DOI: 10.1080/00325899.2021.1959696
Abstract: ABSTRACT Low-pressure powder injection moulding (LPIM) is a cost-effective manufacturing technology used to fabricate complex-shaped parts with high mechanical properties at low- or high-volume production. This research work presents an experimental approach to investigate the… read more here.
Keywords: powder injection; iron; pressure powder; low pressure ... See more keywords
Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept
Sign Up to like & getrecommendations! Published in 2022 at "Journal of Composite Materials"
DOI: 10.1177/00219983221130720
Abstract: Thermoplastic compression resin transfer moulding coupled with injection moulding is an appealing process for the production of thermoplastic composites. However, its implementation at an industrial scale remains challenging as variotherm injection moulding could prevent solid… read more here.
Keywords: methodology; variotherm injection; concept; novel tooling ... See more keywords
Influence of mould material on ceramic disc dimensions in low-pressure injection moulding
Sign Up to like & getrecommendations! Published in 2017 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"
DOI: 10.1177/1464420716666108
Abstract: This work presents a study regarding the influence of the cooling process, as a result of different mould insert materials, on ceramic parts dimensions obtained by low-pressure injection moulding process. Discs of ceramic with Ø80 × 2 mm,… read more here.
Keywords: pressure injection; injection; influence; low pressure ... See more keywords