Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-019-00827-7
Abstract: A contact model that accounts for interfacial cohesion and thermal conduction is developed to investigate the influence of bonding on the final residual stresses build-up in cold spray. The residual stress evolution in the cold-sprayed…
read more here.
Keywords:
sprayed 6061;
residual stress;
interface bonding;
residual stresses ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2019.04.032
Abstract: Abstract An investigation has been performed on the effect of micro-laminated structure and interface bonding on the mechanical performance of graphene oxide (GO) based artificial nacre composites. These composites with different laminated structures were obtained…
read more here.
Keywords:
performance;
structure;
micro laminated;
laminated structure ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Materials Letters"
DOI: 10.1016/j.matlet.2020.127360
Abstract: Abstract Ti-ZrO2 joints with a graphene sponge interlayer were prepared and the interface bonding was characterized by three-point flexural strength. Compared with direct Ti-ZrO2 jointing showing a formation of monoclinic TiO2 and ZrTiO4 at interface…
read more here.
Keywords:
strength;
zro2 joints;
graphene;
zro2 ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c00494
Abstract: Despite the fact that synthetic adhesives have achieved great progress, achieving robust dry/wet adhesion under harsh operating environments is still challenging. Herein, inspired from the extraordinary adhesion mechanism of nature mussel protein adhesive, the balanced…
read more here.
Keywords:
adhesion;
robust dry;
dry wet;
interface bonding ... See more keywords
Sign Up to like & get
recommendations!
3
Published in 2023 at "ACS Omega"
DOI: 10.1021/acsomega.2c08123
Abstract: The application of silane in sulfoaluminate cement repair materials can improve its waterproof, permeability, freeze–thaw, and other properties, but it would reduce the mechanical properties of sulfoaluminate cement-based materials, making it unable to better meet…
read more here.
Keywords:
silane;
interface silane;
molecular dynamics;
interface bonding ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Journal of Materials Chemistry A"
DOI: 10.1039/c9ta02900a
Abstract: High-quality PET/PH1000 FTEs were prepared by a facile solution-processed method, and their bending performance was dramatically improved by interface bonding engineering. The highest efficiency of 12.35% for flexible ITO-free OSCs was achieved. The results open…
read more here.
Keywords:
flexible ito;
highly efficient;
bonding engineering;
ito free ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2023 at "Advances in Structural Engineering"
DOI: 10.1177/13694332231165347
Abstract: The interface bonding layer is usually adopted to connect the asphalt surfacing and steel deck plate; however, the effect of interface bonding conditions on fatigue performance of rib-deck welds still remains unclear. In this study,…
read more here.
Keywords:
effect;
interface bonding;
interface;
rib deck ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Journal of Materials Research"
DOI: 10.1557/jmr.2019.223
Abstract:
read more here.
Keywords:
using functionalized;
bonding matrix;
matrix composites;
composites using ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Materials"
DOI: 10.3390/ma14061529
Abstract: The interface bonding behavior between the steel tube and the concrete of concrete-filled steel tube (CFST) blended with circulating fluidized bed bottom ash (CFB-BA) was investigated in this study. A total of 8 groups of…
read more here.
Keywords:
cfst;
cfb;
bonding behavior;
interface bonding ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2025 at "Materials"
DOI: 10.3390/ma18143278
Abstract: Freeze–thaw damage is a critical durability challenge in cold climates that leads to surface spalling, cracking, and degradation of structural performance. In northern China, the severity of winter conditions further accelerates the degradation of concrete…
read more here.
Keywords:
interface bonding;
frost damaged;
sand;
bonding performance ... See more keywords
Sign Up to like & get
recommendations!
2
Published in 2023 at "Molecules"
DOI: 10.3390/molecules28083584
Abstract: This study performed first-principle-based calculations of the interface adhesion work in interface models of three terminal systems: CrAlSiNSi/WC-Co, CrAlSiNN/WC-Co, and CrAlSiNAl/WC-Co. The results proved that the CrAlSiNSi/WC-Co and CrAlSiNAl/WC-Co interface models had the highest and…
read more here.
Keywords:
ceo2 y2o3;
adhesion work;
interface bonding;
interface ... See more keywords