Photo from wikipedia
Sign Up to like & get
recommendations!
2
Published in 2023 at "ChemSusChem"
DOI: 10.1002/cssc.202202215
Abstract: High performance alkali metal anode solid-state batteries require solid/solid interfaces with fast ion transfer that are morphologically and chemically stable upon electrochemical cycling. Void formation at the alkali metal/solid-state electrolyte interface during alkali metal stripping…
read more here.
Keywords:
alkali metal;
solid state;
state;
interfacial adhesion ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2016.11.074
Abstract: Abstract In this study, lamination as extrinsic mechanism was considered to enhance damage tolerance of three-layer Al6061-5%vol. SiC p /Al1050/Al6061-5%vol. SiC p composites. To fabricate laminates of dissimilar interfacial adhesion, different rolling strains were applied…
read more here.
Keywords:
interfacial adhesion;
adhesion;
damage tolerance;
al6061 ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2017 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2017.04.061
Abstract: Abstract This study compared the interfacial adhesion properties of asphalt with limestone aggregate and asphalt with granite aggregate. The main chemical compositions of limestone and granite aggregate were analyzed using X-ray diffraction XRD. A dynamic…
read more here.
Keywords:
aggregate asphalt;
adhesion;
asphalt;
interfacial adhesion ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Chemical Physics Letters"
DOI: 10.1016/j.cplett.2019.136959
Abstract: Abstract The controllable interfacial adhesion behaviors of polymer-on-polymer surfaces during fused deposition modeling (FDM) three-dimensional (3D) printing process were examined by combining the experimental tests and self-consistent field theory (SCFT) to further get insight into…
read more here.
Keywords:
polymer polymer;
polymer;
polymer surfaces;
interfacial adhesion ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2019 at "Industrial Crops and Products"
DOI: 10.1016/j.indcrop.2019.02.026
Abstract: Abstract This study compares the effect of two compatibilizers on polypropylene (PP)-lignin composites. Two commercial compatibilizers: maleated polypropylene (MAPP) and ethylene butylacrylate glycidylmethacrylate (EBGMA), as well combinations of them, were used to enhance the interfacial…
read more here.
Keywords:
adhesion;
injection;
polypropylene lignin;
interfacial adhesion ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2017.08.017
Abstract: Calcium phosphate cements (CPCs) are extensively used as synthetic bone grafts, but their poor toughness limits their use to non-load-bearing applications. Reinforcement through introduction of fibers and yarns has been evaluated in various studies but…
read more here.
Keywords:
calcium phosphate;
interfacial adhesion;
fiber reinforced;
Sign Up to like & get
recommendations!
0
Published in 2021 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2021.125106
Abstract: Abstract With the aim of optimizing the interfacial adhesion of basalt fibres with thermoset matrices, in this research the plasma polymerization technique (PECVD) was used to synthesize polymeric coatings based on tetravinylsilane (TVS) or its…
read more here.
Keywords:
basalt;
surface;
interfacial adhesion;
basalt fibre ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Progress in Organic Coatings"
DOI: 10.1016/j.porgcoat.2020.106002
Abstract: Abstract In this study, we designed mechanically and chemically robust superhydrophobic coatings with strong interfacial adhesion with polycarbonate (PC) substrates by dripping an acetone solution containing fluorinated silica (F-SiO2) nanoparticles and epoxy resin. It was…
read more here.
Keywords:
superhydrophobic coatings;
sio2;
adhesion;
induced crystallization ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c14221
Abstract: Three different types of surface-modified layers of N, C, and N+C are successfully prepared on AerMet100 steel by plasma-assisted thermochemical treatment, and diamond-like carbon (DLC) films are formed on the top surfaces of the latter…
read more here.
Keywords:
interfacial adhesion;
aermet100 steel;
dlc films;
diamond ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2023 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.3c01519
Abstract: Insufficient interfacial adhesion is a widespread problem across multilayered devices that undermines their reliability. In flexible organic photovoltaics (OPVs), poor interfacial adhesion can accelerate degradation and failure under mechanical deformations due to the intrinsic brittleness…
read more here.
Keywords:
adhesion;
interfacial adhesion;
surface energy;
mechanically robust ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.8b17164
Abstract: Inkjet-printed electronics using metal particles typically lack electrical conductivity and interfacial adhesion with an underlying substrate. To address the inherent issues of printed materials, this Research Article introduces advanced materials and processing methodologies. Enhanced adhesion…
read more here.
Keywords:
adhesion nanostructured;
flexible hybrid;
adhesion;
conductivity ... See more keywords