Interfacial Roughness Enhanced Gel/Elastomer Interfacial Bonding Enables Robust and Stretchable Triboelectric Nanogenerator for Reliable Energy Harvesting.
Sign Up to like & getrecommendations! Published in 2023 at "Small"
DOI: 10.1002/smll.202206528
Abstract: Gel-based triboelectric nanogenerator (TENG) has demonstrated promising potentials in stretchable electronics owing to gel electrodes' intrinsic softness, stretchability, and conductivity. However, delamination between gel and elastomer layers in deformations remains a considerable challenge for gel-based… read more here.
Keywords: interfacial bonding; triboelectric nanogenerator; gel elastomer; gel based ... See more keywords
Enhancing Performances of Polyamide 66 Short Fiber/Natural Rubber Composites via In Situ Vulcanization Reaction
Sign Up to like & getrecommendations! Published in 2020 at "Fibers and Polymers"
DOI: 10.1007/s12221-020-9475-x
Abstract: This paper details a new method for improving the interfacial bonding between PA66 short fiber (PSF) and natural rubber (NR) by reaction of the methacrylic acid (MAA)-grafting-modified PSF with rubber during vulcanization. Carbon-carbon double bonds… read more here.
Keywords: natural rubber; vulcanization; short fiber; interfacial bonding ... See more keywords
Interfacial bonding characteristics and mechanical properties of H68/AZ31B clad plate
Sign Up to like & getrecommendations! Published in 2022 at "International Journal of Minerals, Metallurgy and Materials"
DOI: 10.1007/s12613-020-2240-8
Abstract: Interfacial bonding, microstructures, and mechanical properties of an explosively-welded H68/AZ31B clad plate were systematically studied. According to the results, the bonding interface demonstrated a “wavy-like” structure containing three typical zones/layers: (1) diffusion layer adjacent to… read more here.
Keywords: clad plate; interface; h68 az31b; az31b clad ... See more keywords
The Influence of Additives on the Interfacial Bonding Mechanisms Between Natural Fibre and Biopolymer Composites
Sign Up to like & getrecommendations! Published in 2018 at "Macromolecular Research"
DOI: 10.1007/s13233-018-6119-8
Abstract: There has not been extensive research into the subjects of the interfacial bonding quality and the interaction mechanisms of biopolymers and natural fibres. Attempts have been made to incorporate natural fibres/fillers (biofibres) into the manufacture… read more here.
Keywords: biopolymer; bonding quality; interfacial bonding; bio composites ... See more keywords
Characterization of Interfacial Bonding Mechanism for Graphene-Modified Powder Metallurgy Nickle-Based Superalloy
Sign Up to like & getrecommendations! Published in 2018 at "Acta Metallurgica Sinica (English Letters)"
DOI: 10.1007/s40195-018-0705-9
Abstract: A modified FGH96 superalloy using 0.1 wt% graphene was successfully prepared using the wet mixing method. The interfacial bonding mechanism between the graphene and the superalloy matrix was characterized using optical microscope, scanning electronic microscope, transmission… read more here.
Keywords: mechanism graphene; graphene; superalloy; interfacial bonding ... See more keywords
The effect of copper granules on interfacial bonding and properties of the copper-graphite composite prepared by flake powder metallurgy
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Powder Technology"
DOI: 10.1016/j.apt.2019.09.013
Abstract: Abstract The study evaluates the effect of introducing Cu granules and control milling on the microstructure, interfacial bonding and mechanical properties including sintered density, hardness, compressive strength, flexural strength and electrical conductivity of Copper-Graphite (Gr)… read more here.
Keywords: interfacial bonding; metallurgy; powder; flake powder ... See more keywords
Enhanced dielectric response of ternary polymeric composite films via interfacial bonding between V2C MXene and wide-bandgap ZnS
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.08.192
Abstract: Abstract Increasing the dielectric constant of polymer/sulfide ceramic composites by using wide-bandgap semiconducting sulfide ceramic fillers like ZnS is difficult because of their low interface polarization. To increase the dielectric constant, in this study, ternary… read more here.
Keywords: wide bandgap; zns; dielectric constant; interfacial bonding ... See more keywords
Characterization of enhanced interfacial bonding between epoxy and plasma functionalized carbon nanotube films
Sign Up to like & getrecommendations! Published in 2017 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2017.04.004
Abstract: Abstract The interfacial bonding between carbon nanotube (CNT) films and epoxy is usually fairly weak for high quality composites and difficult to be measured experimentally. In this study, the interfacial bonding strength between a CNT… read more here.
Keywords: plasma; bonding; cnt film; interfacial bonding ... See more keywords
Experimental and numerical study on the interfacial bonding characteristics of FRP-to-concrete joints with mechanical fastening
Sign Up to like & getrecommendations! Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2018.12.033
Abstract: Abstract Premature debonding is the major barrier to FRP (fibre-reinforced polymer) utilization in FRP-reinforced concrete structures and restricts the promotion of structural bearing capability. The additional mechanical fasteners could restrain the interfacial debonding, which has… read more here.
Keywords: study interfacial; frp concrete; bonding characteristics; bonding ... See more keywords
Investigation of the interfacial bonding between flax/wool twine and various cementitious matrices in mortar composites
Sign Up to like & getrecommendations! Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.117833
Abstract: Abstract This study investigates the interfacial bonding of natural fibre reinforced (NFR) cementitious composites by exploring the incorporation of 20–30 mm strands of uncoated and resin coated flax/wool twine into various cementitious matrices. Cementitious matrices consisting… read more here.
Keywords: cementitious matrices; wool twine; interfacial bonding; various cementitious ... See more keywords
Functionalization enhancement interfacial bonding strength between graphene sheets and calcium silicate hydrate: Insights from molecular dynamics simulation
Sign Up to like & getrecommendations! Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2020.120500
Abstract: Abstract The macroscopic mechanical performance of functionalized graphene sheets (FGS) reinforced cement composite is strongly associated with the interfacial bonding performance between FGS and calcium silicate hydrate (CSH). Herein, the interfacial bonding performance of CSH… read more here.
Keywords: strength; bonding; graphene sheets; interfacial bonding ... See more keywords