Articles with "interfacial layer" as a keyword



Photo from wikipedia

Improved Performance and Stability of Organic Solar Cells by the Incorporation of a Block Copolymer Interfacial Layer

Sign Up to like & get
recommendations!
Published in 2020 at "Advanced Materials Interfaces"

DOI: 10.1002/admi.202000918

Abstract: In a proof‐of‐concept study, this work demonstrates that incorporating a specifically designed block copolymer as an interfacial layer between a charge transport layer and the photoactive layer in organic solar cells can enhance the interface… read more here.

Keywords: layer; copolymer interfacial; block copolymer; interfacial layer ... See more keywords

Enhanced Stability and Performance in Perovskite Nanocrystal Light‐Emitting Devices Using a ZnMgO Interfacial Layer

Sign Up to like & get
recommendations!
Published in 2017 at "Advanced Optical Materials"

DOI: 10.1002/adom.201700377

Abstract: Perovskite has been considered to be a promising optoelectronic material due to its superior properties, yet, it are strongly sensitive to oxygen and water, especially when applied in devices. Here, a highly efficient and stable… read more here.

Keywords: interfacial layer; mzo; layer; light emitting ... See more keywords
Photo from wikipedia

Influence of nanoparticle diameter and interfacial layer on magnetohydrodynamic nanofluid flow with melting heat transfer inside rotating channel

Sign Up to like & get
recommendations!
Published in 2020 at "Mathematical Methods in the Applied Sciences"

DOI: 10.1002/mma.6818

Abstract: The present article addresses melting heat transmission phenomenon in MHD nanofluid flow between two horizontally located plates in rotating structure. This exploration is executed in engine oil‐based nanofluid accompanied by graphene oxide nanoparticles. Thermal conductivity… read more here.

Keywords: nanoparticle diameter; layer; diameter interfacial; melting heat ... See more keywords
Photo by aaronburden from unsplash

A detailed comparative study on electrical and photovoltaic characteristics of Al/p-Si photodiodes with coumarin-doped PVA interfacial layer: the effect of doping concentration

Sign Up to like & get
recommendations!
Published in 2019 at "Polymer Bulletin"

DOI: 10.1007/s00289-019-02704-3

Abstract: In this study, three different poly(vinyl alcohol) (PVA) films doped with weight percentages of 0.05, 0.10 and 0.20 coumarin were coated on p-Si wafer via spin-coating method for the purpose of investigating the interaction of… read more here.

Keywords: coumarin; doped pva; study; coumarin doped ... See more keywords
Photo by henrylim from unsplash

Butt Laser Welding–Brazing of AZ31 Mg to Nickel-Coated Ti-6Al-4V

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Materials Engineering and Performance"

DOI: 10.1007/s11665-019-04161-5

Abstract: Mg and Ti alloy are hard to be bonded due to their huge discrepancy in physical and metallurgical characteristics. As an intermediate element, Ni is feasible for joining of Mg and Ti. The interfacial microstructure… read more here.

Keywords: interfacial layer; coating thickness; butt laser; layer ... See more keywords
Photo by schluditsch from unsplash

Improving interfacial and electrical properties of HfO2/SiO2/p-Si stacks with N2-plasma-treated SiO2 interfacial layer

Sign Up to like & get
recommendations!
Published in 2017 at "Rare Metals"

DOI: 10.1007/s12598-017-0958-x

Abstract: The effect of N2-plasma-treated SiO2 interfacial layer on the interfacial and electrical characteristics of HfO2/SiO2/p-Si stacks grown by atomic layer deposition (ALD) was investigated. The microstructure and interfacial chemical bonding configuration of the HfO2/SiO2/Si stacks… read more here.

Keywords: hfo2 sio2; treatment; plasma treatment; sio2 interfacial ... See more keywords
Photo from wikipedia

Metastable intermixed Core-shell Al@M(IO3)x nanocomposites with improved combustion efficiency by using tannic acid as a functional interfacial layer

Sign Up to like & get
recommendations!
Published in 2020 at "Chemical Engineering Journal"

DOI: 10.1016/j.cej.2019.123369

Abstract: Abstract As is known to all, the nano-aluminum (n-Al) of metastable intermixed composites (MICs) could be easily and slowly oxidized during long-term storage. Herein, a plant polyphenol, tannic acid (TA), has been used to coat… read more here.

Keywords: core shell; microscopy; io3; spectroscopy ... See more keywords
Photo from wikipedia

Consequences of nanoparticle diameter and solid–liquid interfacial layer on the SWCNT/EO nanofluid flow over various shaped thin slendering needles

Sign Up to like & get
recommendations!
Published in 2018 at "Chinese Journal of Physics"

DOI: 10.1016/j.cjph.2018.06.016

Abstract: Abstract In this research article, we have discussed about the boundary layer flow of single walled CNT– engine oil nanofluid over three distinct nonlinearly slendering isothermal thin needles of cone, paraboloid and cylinder shapes with… read more here.

Keywords: swcnt; liquid interfacial; layer; solid liquid ... See more keywords
Photo by henrylim from unsplash

Interfacial layer thickness design for exploiting the reinforcement potential of nanocellulose in cellulose triacetate matrix

Sign Up to like & get
recommendations!
Published in 2017 at "Composites Science and Technology"

DOI: 10.1016/j.compscitech.2017.05.010

Abstract: Abstract The contribution of the interfacial layer thickness to composite properties was investigated using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofiber (TOCN) and cellulose triacetate (CTA). To control the interfacial layer thickness, the surface of the TOCNs was… read more here.

Keywords: layer thickness; layer; nanocomposite films; cellulose triacetate ... See more keywords

Failure mechanism transition of 3D-printed biomimetic sutures

Sign Up to like & get
recommendations!
Published in 2018 at "Engineering Fracture Mechanics"

DOI: 10.1016/j.engfracmech.2018.06.013

Abstract: Abstract Inspired by the biological sutures in nature, triangular suture specimens with different tooth tip angle and material combinations were fabricated via multi-material 3D printing. From mechanical experiments under uni-axial tension, two basic failure mechanisms… read more here.

Keywords: interfacial layer; mechanism transition; failure mechanisms; failure ... See more keywords
Photo from wikipedia

Intermittency acceleration of water droplet population dynamics inside the interfacial layer between cloudy and clear air environments

Sign Up to like & get
recommendations!
Published in 2021 at "International Journal of Multiphase Flow"

DOI: 10.1016/j.ijmultiphaseflow.2021.103669

Abstract: Abstract The formation and life-span of clouds as well as the associated unsteady processes concerning the micro-physics of the water phases they may contain are open questions in atmospheric physics. We here use three-dimensional direct… read more here.

Keywords: inside interfacial; water; layer; air ... See more keywords