Interfacial microstructure evolution of solder joints by doping Cu nanoparticles into Ni(P) electroless plating
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-020-04543-9
Abstract: To enhance the effects of electroless Ni–P plating on inhibiting atom diffusion in Sn-58Bi joint systems, adding nano-sized metals into coating was regarded as an efficient method. Therefore, Cu nanoparticles were chosen as the additive… read more here.
Keywords: interfacial microstructure; evolution solder; solder joints; electroless plating ... See more keywords
Interfacial microstructure evolution and mechanical properties of B4C-based composite joints bonded with Ti foil
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.07.003
Abstract: Abstract The interfacial microstructure and mechanical properties of B4C-SiC-TiB2 composite joints diffusion bonded with Ti foil interlayer were investigated. The joints were diffusion bonded in the temperature range of 800–1200 °C with 50 MPa by spark plasma… read more here.
Keywords: interfacial microstructure; composite joints; mechanical properties; properties b4c ... See more keywords
Interfacial microstructure and mechanical properties of TC4/Ti3SiC2 contact-reactive brazed joints using a Cu interlayer
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.08.328
Abstract: Abstract Reliable contact-reactive brazed joints of TC4 alloy and Ti 3 SiC 2 ceramic were obtained using a Cu interlayer. The interfacial microstructure of a TC4/Ti 3 SiC 2 joint brazed at 920 °C for 10 min… read more here.
Keywords: interfacial microstructure; sic ceramic; layer; brazed joints ... See more keywords
Influence of interfacial microstructure on pullout behavior and failure mechanism of steel fibers embedded in cement-based materials
Sign Up to like & getrecommendations! Published in 2021 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2021.124688
Abstract: Abstract In this study, the failure mechanism of the fiber–matrix interface during pullout and the effective improvement of the pullout resistance were investigated. The interfacial bond properties of fibers from cement-based materials were systematically analyzed… read more here.
Keywords: cement based; interfacial microstructure; fiber matrix; failure mechanism ... See more keywords
Effects of process parameters on interfacial microstructure, residual stresses, and properties of tunnel furnace brazed diamonds
Sign Up to like & getrecommendations! Published in 2018 at "Diamond and Related Materials"
DOI: 10.1016/j.diamond.2018.04.003
Abstract: Abstract Diamonds were brazed on the substrate with nickel‑chromium (Ni Cr) filler alloy at a certain temperature for three different mesh belt speeds in the mesh belt continuous tunnel furnace, respectively. In this study, a… read more here.
Keywords: residual stresses; interfacial microstructure; brazed diamonds; tunnel furnace ... See more keywords
Effect of Pd, temperature and time on wetting and interfacial microstructure of bulk metallic glasses TiCuZrPd on Ti-6Al-4V substrate
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.10.216
Abstract: Abstract Melting behavior of TiCuZrPd bulk metallic glasses (BMGs) containing 10, 14, 20 at.% Pd was studied by DSC and their melting range is: 845–910, 831–900, 874–911 °C, respectively. Wetting of TiCuZrPd BMGs on Ti-6Al-4V substrate was… read more here.
Keywords: 6al substrate; interfacial microstructure; temperature time; layer ... See more keywords
Effects of asymmetry and annealing on interfacial microstructure and mechanical properties of Cu/Al laminated composite fabricated by asymmetrical roll bonding
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.152453
Abstract: Abstract Cu/Al laminated composite was fabricated by means of asymmetrical roll bonding and annealing process. The interfacial microstructure and mechanical properties of clad sheets were studied to explore the influence of rotation speed ratio and… read more here.
Keywords: interfacial microstructure; composite fabricated; roll; roll bonding ... See more keywords
Interfacial microstructure evolution and weld formation during ultrasonic welding of Al alloy to Cu
Sign Up to like & getrecommendations! Published in 2018 at "Materials Characterization"
DOI: 10.1016/j.matchar.2018.03.010
Abstract: Abstract Dissimilar welds of Al alloy 1050 to Cu were prepared via ultrasonic spot welding in order to understand the formation of welds and interfacial microstructures. To observe oxide layer behavior at the weld interface,… read more here.
Keywords: interfacial microstructure; formation; microstructure evolution; ultrasonic welding ... See more keywords
Interfacial microstructure and improved wetting mechanism of SiO 2f /SiO 2 brazed with Nb by plasma treatment
Sign Up to like & getrecommendations! Published in 2017 at "Vacuum"
DOI: 10.1016/j.vacuum.2017.06.041
Abstract: Abstract Due to the poor wettability with AgCuTi and high residual stress, it is difficult to achieve high-strength brazed joint of SiO 2f /SiO 2 (quartz fiber reinforced silica) with metals. Herein, plasma treatment as… read more here.
Keywords: interfacial microstructure; plasma treatment; sio sio; wettability ... See more keywords
Interfacial microstructure and mechanical properties of C/C composites and Nb joints brazed with Cu75Pt25 filler metal
Sign Up to like & getrecommendations! Published in 2018 at "Vacuum"
DOI: 10.1016/j.vacuum.2018.08.036
Abstract: Abstract C/C composites were successfully brazed to Nb substrate using Cu75Pt25 filler metal. The typical interfacial microstructure of brazed joints was C/C composites/NbC/Nb(s, s)/Cu(s, s)/NbPt2/Nb3Pt/Nb(s, s)/Nb. The effect of brazing temperature on the interfacial microstructure… read more here.
Keywords: filler metal; interfacial microstructure; joints brazed; temperature ... See more keywords
Interfacial microstructure of Ti/Ni joints with Ti–Al interlayer by rapid thermal explosion bonding in vacuum
Sign Up to like & getrecommendations! Published in 2020 at "Vacuum"
DOI: 10.1016/j.vacuum.2019.109028
Abstract: Abstract The present study investigated the joining between Ti and Ni by rapid thermal explosion (TE) in vacuum of read more here.
Keywords: thermal explosion; interfacial microstructure; rapid thermal; vacuum interfacial ... See more keywords