Optimizing the hot isostatic pressing process based on simulation and experimental validation of hollow structure carbon fiber/polymer composites
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.29746
Abstract: In order to leverage the advantages of the hot isostatic pressing (HIP) process and efficiently and stably manufacture carbon fiber reinforced polymer (CFRP) hollow load‐bearing structures, an evaluation and optimization of three processes were carried… read more here.
Keywords: carbon fiber; process; isostatic pressing; hot isostatic ... See more keywords
Effect of glass container encapsulation on deformation and densification behavior of metal powders during hot isostatic pressing
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Material Forming"
DOI: 10.1007/s12289-017-1361-8
Abstract: Hot isostatic pressing process consolidates metal powders to produce fully dense parts with complex geometries. Deformation behavior of compacts during hot isostatic pressing process typically is anisotropic for powders encapsulated in metal containers. Therefore, post-processing… read more here.
Keywords: densification; glass; metal; deformation ... See more keywords
A comparison between the properties of natural hydroxyapatite produced by cold isostatic pressing and spark plasma sintering techniques
Sign Up to like & getrecommendations! Published in 2017 at "Journal of the Australian Ceramic Society"
DOI: 10.1007/s41779-017-0158-z
Abstract: The natural hydroxyapatite (HA) extracted from cattle bone was produced by cold isostatic pressing (CIP) and spark plasma sintering (SPS) techniques and sintered at 1350 and 1150 °C, respectively. Scanning electron microscope (SEM), X-ray diffraction (XRD)… read more here.
Keywords: produced cold; plasma sintering; spark plasma; cold isostatic ... See more keywords
Effect of hot isostatic pressing on the critical defect size distribution in AlSi7Mg0.6 alloy obtained by selective laser melting
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2020.105797
Abstract: Abstract This study focuses on the influence of defect density on the sizes of the critical defects responsible for fatigue failure in AlSi7Mg0.6 alloy produced by Selective Laser Melting. Samples having similar microstructures and different… read more here.
Keywords: selective laser; alsi7mg0 alloy; laser melting; isostatic pressing ... See more keywords
Densification of cerium-doped lutetium oxyorthosilicate scintillation ceramics by hot isostatic pressing
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.05.248
Abstract: Abstract The effects of presintering temperature, soak time, and Hot Isostatic Pressing (HIPing) temperature on the microstructure and densification behavior of cerium-doped lutetium oxyorthsilicate (Lu 2 SiO 5 :Ce, LSO:Ce) ceramics were investigated. It was… read more here.
Keywords: cerium; densification; doped lutetium; isostatic pressing ... See more keywords
Synthesis of Be12Ti compound via arc melting or hot isostatic pressing
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.152919
Abstract: Abstract According to the recently proposed changes of the HCPB design concept of tritium breeding blanket for the DEMO fusion reactor, massive Be12Ti blocks are considered to be used for neutron multiplication. The paper compares… read more here.
Keywords: be12ti; arc melting; isostatic pressing; extrusion ... See more keywords
Fabrication and laser performances of Yb:Sc2O3 transparent ceramics from different combination of vacuum sintering and hot isostatic pressing conditions
Sign Up to like & getrecommendations! Published in 2020 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2019.10.059
Abstract: Abstract In this paper we report on the preparation and laser performance of transparent 3at.% Yb:Sc2O3 ceramics by reactive sintering of commercially available powders under vacuum followed by hot isostatic pressing (HIP). Combinations of different… read more here.
Keywords: laser; vacuum sintering; laser performances; isostatic pressing ... See more keywords
Energy and time saving processing: A combination of hot isostatic pressing and heat treatment
Sign Up to like & getrecommendations! Published in 2017 at "Metal Powder Report"
DOI: 10.1016/j.mprp.2016.04.001
Abstract: The technique of hot isostatic pressing (HIP) is used to simultaneously heat up and apply high isostatic pressure to a metallic or ceramic entity in order to reach compaction. The integration of heat treatment into… read more here.
Keywords: heat treatment; energy time; isostatic pressing; heat ... See more keywords
Yb:Y 2 O 3 transparent ceramics processed with hot isostatic pressing
Sign Up to like & getrecommendations! Published in 2017 at "Optical Materials"
DOI: 10.1016/j.optmat.2016.04.029
Abstract: Abstract Highly transparent 5 at.% Yb:Y2O3 ceramics were fabricated by using a combination method of vacuum sintering and hot isostatic pressing (HIP). Co-precipitated Yb:Y2O3 powders, with 1 at.% ZrO2 as the sintering aid, were used as the… read more here.
Keywords: transparent ceramics; ceramics processed; isostatic pressing; hot isostatic ... See more keywords
Effects of Hot Isostatic Pressing on Copper Parts Fabricated via Binder Jetting
Sign Up to like & getrecommendations! Published in 2017 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2017.07.084
Abstract: Abstract Binder Jetting, an Additive Manufacturing process that fabricates parts via selective inkjet deposition of binder into a powder bed, is capable of cost-effectively producing complex metal and ceramic components without the need for support… read more here.
Keywords: copper; density; binder jetting; binder ... See more keywords
High critical performance iron-based pancake coils via hot isostatic pressing
Sign Up to like & getrecommendations! Published in 2025 at "Superconductor Science and Technology"
DOI: 10.1088/1361-6668/adcd02
Abstract: The iron-based superconductors are promising candidates for high field magnet applications due to their excellent performance. The hot isostatic pressing (HIP) heat treatment process can significantly improves the mass density of iron-based materials, thereby enhancing… read more here.
Keywords: critical performance; isostatic pressing; iron; hot isostatic ... See more keywords