Articles with "ito glass" as a keyword



Photo by fiercelupus from unsplash

Morphological and optical properties of ZnO thin films grown on Si and ITO glass substrates

Sign Up to like & get
recommendations!
Published in 2017 at "Ionics"

DOI: 10.1007/s11581-017-2194-7

Abstract: In this study, ZnO thin films have been electrodeposited from zinc nitrate solution without using any catalyst, additive, or seed layer on two kinds of substrates (Si and ITO glass). Using cyclic voltammetry and chronoamperometry,… read more here.

Keywords: thin films; ito glass; grown ito; zno ... See more keywords
Photo from wikipedia

Plasma-assisted ITO sol coating for optimizing the optoelectronic properties of ITO glass

Sign Up to like & get
recommendations!
Published in 2021 at "Applied Surface Science"

DOI: 10.1016/j.apsusc.2021.149414

Abstract: Abstract The argon atmospheric pressure plasma treatment is combined with the conventional sol-gel dip-coating process for fabricating ITO thin films to improve the electrical property of the ITO glass. The increase of the surface free… read more here.

Keywords: ito glass; surface; ito layer; plasma treatment ... See more keywords
Photo from wikipedia

Colorless-to-black electrochromic devices based on ambipolar electrochromic system consisting of cross-linked poly(4-vinyltriphenylamine) and tungsten trioxide with high optical contrast in visible and near-infrared regions

Sign Up to like & get
recommendations!
Published in 2021 at "Chemical Engineering Journal"

DOI: 10.1016/j.cej.2020.126402

Abstract: Abstract Electrochromic materials are getting huge attention of recent research owing to their vast applications in the optoelectronic research field. Herein, poly(4-vinyltriphenylamine) (PVTPA) was chemically synthesized. The cross-linked poly(4-vinyltriphenylamine) (PVTPA-CL) film with a thickness of… read more here.

Keywords: colorless black; optical contrast; ito glass; poly vinyltriphenylamine ... See more keywords

The photocathodic properties of a Fe2O3 wrapped CuFeO2 layer on ITO glass for water splitting

Sign Up to like & get
recommendations!
Published in 2018 at "Chemical Physics"

DOI: 10.1016/j.chemphys.2018.08.009

Abstract: Abstract A Fe2O3 wrapped CuFeO2 layer structure was fabricated on ITO glass by electrophoretic deposition and sol-gel methods at 400 °C. Such low fabrication temperature avoids the damage of ITO glass’s transparency and conductivity. The FeCl3… read more here.

Keywords: fe2o3 wrapped; layer; cufeo2 layer; ito glass ... See more keywords
Photo from wikipedia

Optimized indium solubilization from LCD panels using H2SO4 leaching.

Sign Up to like & get
recommendations!
Published in 2020 at "Waste management"

DOI: 10.1016/j.wasman.2020.07.002

Abstract: Spent liquid crystal displays (LCDs) are a secondary source of precious/strategic metals, including indium (In). The present study involved optimizing the solubilization of this strategic element from samples of indium tin oxide (ITO) glass prepared… read more here.

Keywords: ito glass; optimized indium; solubilization; h2so4 ... See more keywords
Photo from wikipedia

Microfluidic Device Integrated with PDMS Microchannel and unmodified ITO glass Electrodes for Highly Sensitive, Specific and Point-of Care Detection of Copper and Mercury.

Sign Up to like & get
recommendations!
Published in 2023 at "IEEE transactions on nanobioscience"

DOI: 10.1109/tnb.2023.3241827

Abstract: This work delves upon developing a two-layer plasma-bonded microfluidic device with a microchannel layer and electrodes for electroanalytical detection of heavy metal ions. The three-electrode system was realized on an ITO-glass slide by suitably etching… read more here.

Keywords: point care; ito glass; microfluidic device; unmodified ito ... See more keywords
Photo by ldxcreative from unsplash

Improving Etched Flatness by Micro Airflow Array Pressurization in ITO Glass Laser Machining

Sign Up to like & get
recommendations!
Published in 2023 at "Micromachines"

DOI: 10.3390/mi14030676

Abstract: In laser etching of ITO glass, the warpage due to workpiece positioning causes breakpoint or deformation of micron-scale etching circuits. Based on traditional laser etching, a micro-airflow array pressurization is proposed by using a micro-flow… read more here.

Keywords: laser; ito glass; flow; pressurization ... See more keywords