Sign Up to like & get
recommendations!
0
Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201901384
Abstract: Direct patterning of copper (Cu) electrodes through a noncontact electrohydrodynamic (EHD) jet printing process is developed to overcome the drawback of printing mechanisms such as high viscosity in inkjet printing. Printed Cu lines with a…
read more here.
Keywords:
high viscosity;
jet printing;
thin film;
jet ... See more keywords
Photo by nci from unsplash
Sign Up to like & get
recommendations!
1
Published in 2020 at "Advanced Science"
DOI: 10.1002/advs.202001854
Abstract: Abstract There is an unmet demand for microfluidics in biomedicine. This paper describes contactless fabrication of microfluidic circuits on standard Petri dishes using just a dispensing needle, syringe pump, three‐way traverse, cell‐culture media, and an…
read more here.
Keywords:
printing microfluidic;
devices demand;
jet printing;
microfluidic devices ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2022 at "Advanced Electronic Materials"
DOI: 10.1002/aelm.202200728
Abstract: Electrohydrodynamic jet (e‐jet) printing technology overcomes some limitations such as the viscosity and resolution of the traditional ink‐jet printing by breaking surface tension of the droplets with high voltage and the formation of Taylor cone.…
read more here.
Keywords:
fabrication electronics;
printing technology;
jet;
electrohydrodynamic jet ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Microsystem Technologies"
DOI: 10.1007/s00542-019-04499-9
Abstract: The aim of this work is to simulate the formation of coaxial electrohydrodynamic jet (CE-Jet) and obtain the optimized working parameters for coaxial electrohydrodynamic focused jet printing (CEFJP), then further direct writing nanoscale structures. In…
read more here.
Keywords:
electrohydrodynamic jet;
coaxial electrohydrodynamic;
nanoscale structures;
jet printing ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-020-03279-w
Abstract: Fabrication of microstrip transmission line (MTL) in a one-step and direct process was a challenge in many of the recent research projects. In this study, for the first time, an MTL is printed on RO4003C…
read more here.
Keywords:
ink jet;
jet;
conductivity;
jet printing ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2020.03.058
Abstract: Abstract The dispersion of low surface polarity ultra-fine powders has been a technical bottle-neck in many industrial applications, including ceramic or glass decoration and solar electrodes. Herein, we report a surface modification method to improve…
read more here.
Keywords:
glass frit;
ink jet;
glass;
surface ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Journal of Industrial and Engineering Chemistry"
DOI: 10.1016/j.jiec.2020.02.009
Abstract: Abstract Direct-patterned Cu-based conductive electrodes were printed through electrohydodynamic (EHD) jet printing via cone-jet mode. The introduction of a capping agent in the synthesis of the Cu ink limited excessive conductivity, which enabled the pristine…
read more here.
Keywords:
jet mode;
jet;
cone jet;
jet printing ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Organic Electronics"
DOI: 10.1016/j.orgel.2019.105561
Abstract: Abstract Generally, anisotropic conductive films (ACFs) used for bonding in communication devices and displays are manufactured by applying pressure to conductive particles at desired positions. The conventional production process has serious disadvantages that waste of…
read more here.
Keywords:
ink jet;
ink;
jet printing;
conductive particles ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Robotics and Computer-integrated Manufacturing"
DOI: 10.1016/j.rcim.2015.09.010
Abstract: This paper presents a novel micro-manufacturing method for fabrication of electrical features and patterns on highly insulating substrates and flexible substrates based on high-resolution AC-pulse modulated electrohydrodynamic jet (e-jet) printing of silver nanoink as seed…
read more here.
Keywords:
jet;
insulating substrates;
printing;
electroless copper ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927620023296
Abstract: Additive manufacturing has the well-known benefits of reduced waste material and geometrical freedom in parts. Powder bed binder jet 3D printing is a type of additive manufacturing that is versatile, is not energy based, operates…
read more here.
Keywords:
binder;
jet printing;
build bed;
powder ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2023 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c18838
Abstract: Aerosol jet printing is a noncontact, digital, additive manufacturing technique compatible with a wide variety of functional materials. Although promising, development of new materials and devices using this technique remains hindered by limited rational ink…
read more here.
Keywords:
ink;
graphene ink;
jet printing;
aerosol jet ... See more keywords