Recycling Ladle Furnace Slag as Flux in Steelmaking: A Review
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Sustainable Metallurgy"
DOI: 10.1007/s40831-019-00243-9
Abstract: The use of synthetic fluxes in secondary steelmaking not only improves the properties of top slag and steel quality but also increases the production cost. Ladle furnace (LF) slag can be used as a replacement… read more here.
Keywords: slag; ladle furnace; furnace slag; flux steelmaking ... See more keywords
Chemical toxicity and ecotoxicity evaluation of tannery sludge stabilized with ladle furnace slag.
Sign Up to like & getrecommendations! Published in 2018 at "Journal of environmental management"
DOI: 10.1016/j.jenvman.2017.03.077
Abstract: In this study, the stabilization of tannery sludge, which produced during the physico-chemical treatment of tannery wastewaters, was examined by the addition of ladle furnace slag. Moreover, the simultaneous addition of organoclay and ladle furnace… read more here.
Keywords: tannery; furnace slag; ladle furnace; waste ... See more keywords
Effects of a ladle furnace slag added to soil on morpho-physiological and biochemical parameters of Amaranthus paniculatus L. plants.
Sign Up to like & getrecommendations! Published in 2017 at "Journal of hazardous materials"
DOI: 10.1016/j.jhazmat.2017.01.050
Abstract: Industrial slag from steelwork activities is considered a by-product by the EU legislation and it can be used for civil construction. In this work, an experiment in a greenhouse was conducted over a 6-week period… read more here.
Keywords: slag; ladle furnace; furnace slag; morpho physiological ... See more keywords
Ladle Furnace Slag as Binder for Cement-Based Composites
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials in Civil Engineering"
DOI: 10.1061/(asce)mt.1943-5533.0002061
Abstract: AbstractIn recent years, the environmental facet of industrial waste management has become imperative. The recycling of these residues in the civil construction sector is growing, since both indust... read more here.
Keywords: cement based; ladle furnace; furnace slag; slag binder ... See more keywords
Molten Steel Temperature Prediction in Ladle Furnace Using a Dynamic Ensemble for Regression
Sign Up to like & getrecommendations! Published in 2021 at "IEEE Access"
DOI: 10.1109/access.2021.3053357
Abstract: The accurate prediction of molten steel temperature is of great significance to the control of tapping temperature in ladle furnace. The more accurate the prediction is the better performance the controller will attain. In order… read more here.
Keywords: steel temperature; temperature; prediction; ladle furnace ... See more keywords
Stabilization of lateritic soil by ladle furnace slag for pavement subbase material
Sign Up to like & getrecommendations! Published in 2021 at "Geomechanics and Engineering"
DOI: 10.12989/gae.2021.26.4.323
Abstract: The effect of ladle furnace slag or LFS on the mechanical properties of the lateritic soil mixes for use as a subbase course material in the pavement structure was investigated. The lateritic soil grade E… read more here.
Keywords: furnace slag; ladle furnace; soil; lateritic soil ... See more keywords
Mass-Transfer Model for Steel, Slag, and Inclusions during Ladle-Furnace Refining
Sign Up to like & getrecommendations! Published in 2017 at "High Temperature Materials and Processes"
DOI: 10.1515/htmp-2017-0011
Abstract: Abstract Precise control of inclusion and molten steel compositions during ladle-furnace refining is important to obtain high-quality steel. Mass-transfer behavior affects these compositions. A model was developed to investigate the mass transfer occurring between molten… read more here.
Keywords: molten steel; ladle furnace; furnace refining; steel slag ... See more keywords
Composition and Mobility of Ionic Ensembles in Slags for Steel Refining in the Ladle–Furnace Unit
Sign Up to like & getrecommendations! Published in 2018 at "Steel in Translation"
DOI: 10.3103/s0967091218010060
Abstract: High-lime synthetic slags for refining steels in the ladle–furnace unit are investigated. The content of the slag mixtures is as follows: 60 wt % CaO, 7 and 8 wt % MgO, 7–23 wt % Al2O3,… read more here.
Keywords: ladle furnace; furnace unit; slags steel; mol slags ... See more keywords
Improvements of Flexural Properties and Thermal Performance in Thin Geopolymer Based on Fly Ash and Ladle Furnace Slag Using Borax Decahydrates
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15124178
Abstract: This paper elucidates the influence of borax decahydrate addition on the flexural and thermal properties of 10 mm thin fly ash/ladle furnace slag (FAS) geopolymers. The borax decahydrate (2, 4, 6, and 8 wt.%) was… read more here.
Keywords: strength; borax decahydrate; fly ash; ladle furnace ... See more keywords