Articles with "lafeo3" as a keyword



Photo by elevatebeer from unsplash

Enhanced Visible‐Light Photoactivities of Perovskite‐Type LaFeO3 Nanocrystals by Simultaneously Doping Er3+ and Coupling MgO for CO2 Reduction

Sign Up to like & get
recommendations!
Published in 2019 at "ChemCatChem"

DOI: 10.1002/cctc.201901294

Abstract: The use of solar energy to convert CO2 into chemical fuels not only can create renewable energy but also can alleviate the greenhouse effect. In this work, MgO/LaFeO3 : Er3+ composites were prepared, and their photocatalytic CO2… read more here.

Keywords: er3; co2 reduction; lafeo3; visible light ... See more keywords
Photo from wikipedia

Visible light assisted thermocatalytic reaction of CO + NO over Pd/LaFeO3

Sign Up to like & get
recommendations!
Published in 2019 at "Applied Catalysis B: Environmental"

DOI: 10.1016/j.apcatb.2019.03.029

Abstract: Abstract A LaFeO3 supported Pd nanoparticle catalyst Pd/LaFeO3 was prepared by a two-step precipitation–deposition method. Its catalytic performance for the reduction of NO by CO was subsequently evaluated in the lower temperature under visible light… read more here.

Keywords: light; light assisted; light could; visible light ... See more keywords
Photo by sebaty_jp from unsplash

Unsupported and silica-supported perovskite-type lanthanum manganite and lanthanum ferrite in the conversion of ethanol

Sign Up to like & get
recommendations!
Published in 2019 at "Fuel Processing Technology"

DOI: 10.1016/j.fuproc.2019.06.001

Abstract: Abstract The acid-base properties of perovskite-type LaMnO3 and LaFeO3 catalysts were adjustable by immobilizing them on silica. Unsupported LaMnO3 and LaFeO3 contained majorly basic sites on their surfaces. Dispersing LaMnO3 and LaFeO3 on silica suppressed… read more here.

Keywords: lanthanum; aldolization; silica supported; lamno3 lafeo3 ... See more keywords
Photo from wikipedia

Observation of dielectric anomalies and enhanced multiferroic properties in (1-x) Ba0.80Sr0.20TiO3-(x) LaFeO3 ceramics near at MPB region

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2021.158741

Abstract: Abstract Polycrystalline solid solution of (1-x)Ba0.8Sr0.2TiO3 - xLaFeO3 (0 ≤ x ≤ 0.50) samples were prepared by a conventional solid state process. The crystal structure of the samples transformed from tetragonal structure with P4mm space group (for x   0.35)… read more here.

Keywords: observation dielectric; region; anomalies enhanced; enhanced multiferroic ... See more keywords
Photo from wikipedia

Colossal dielectric response, multiferroic properties, and gas sensing characteristics of the rare earth orthoferrite LaFeO3 ceramics

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2021.160634

Abstract: Abstract A great impact of the multifunctional or multiferroic materials on device applications has gained tremendous attention from scientific research groups in the field of materials science. The multiferroic materials bear superior properties of alternating… read more here.

Keywords: gas; lafeo3; colossal dielectric; gas sensing ... See more keywords
Photo from wikipedia

Mechanism and thermodynamic study of solar H2 production on LaFeO3 defected surface: Effect of H2O to H2 conversion ratio and kinetics on optimization of energy conversion efficiency

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Cleaner Production"

DOI: 10.1016/j.jclepro.2020.122293

Abstract: Abstract Owing to favorable water-splitting activity at low concentration of steam, LaFeO3 represents promising solar thermochemical (STC) materials to achieve commercial energy conversion efficiency (ηsolar-to-fuel) of 20%, which is far from reaching up to now.… read more here.

Keywords: solar fuel; lafeo3; water splitting; production ... See more keywords
Photo from wikipedia

Quasi-polymeric construction of stable perovskite-type LaFeO3/g-C3N4 heterostructured photocatalyst for improved Z-scheme photocatalytic activity via solid p-n heterojunction interfacial effect.

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of hazardous materials"

DOI: 10.1016/j.jhazmat.2018.01.025

Abstract: Materials of perovskite-type structure have attracted considerable attention for their applications in photocatalysis. In this study, a novel composite of p-type LaFeO3 microsphere coated with n-type nanosized graphitic carbon nitride nanosheets was constructed by the… read more here.

Keywords: lafeo3; solid heterojunction; perovskite type; heterojunction interfacial ... See more keywords
Photo by ale_s_bianchi from unsplash

Efficient integration of plasmonic Ag/AgCl with perovskite-type LaFeO3: Enhanced visible-light photocatalytic activity for removal of harmful algae.

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of hazardous materials"

DOI: 10.1016/j.jhazmat.2020.125018

Abstract: A novel plasmonic Ag/AgCl@LaFeO3 (ALFO) photocatalyst was successfully synthesized by a simple in-situ synthesis method with enhanced photocatalytic activity under visible light for harmful algal blooms (HABs) control. The structure, morphology, chemical states, optical and… read more here.

Keywords: lafeo3; visible light; plasmonic agcl; photocatalytic activity ... See more keywords
Photo from wikipedia

Metallic conductivity of the heterointerface between LaFeO3 and SrTiO3

Sign Up to like & get
recommendations!
Published in 2021 at "Solid State Communications"

DOI: 10.1016/j.ssc.2020.114105

Abstract: Abstract Carrier doping to 3d transition metal oxides was proposed as an effective 3d band-filling control method. The mechanism differs from that previously reported to involve “charge discontinuity at the heterointerface”. The mechanism uses the… read more here.

Keywords: lafeo3; lafeo3 srtio3; heterointerface lafeo3; heterointerface ... See more keywords
Photo by towfiqu999999 from unsplash

Effects of the Citric Acid Addition on the Morphology, Surface Area, and Photocatalytic Activity of LaFeO3 Nanoparticles Prepared by Glucose-Based Gel Combustion Methods

Sign Up to like & get
recommendations!
Published in 2018 at "Industrial & Engineering Chemistry Research"

DOI: 10.1021/acs.iecr.8b04263

Abstract: In this paper, the synthesis of LaFeO3 based on the gel combustion method has been improved by using citric acid (CA) as a secondary chelating agent on glucose. The synthesized samples were calcined at 600… read more here.

Keywords: based gel; lafeo3; citric acid; microscopy ... See more keywords
Photo by mymind from unsplash

Activation of bisulfite by LaFeO3 loaded on red mud for degradation of organic dye

Sign Up to like & get
recommendations!
Published in 2022 at "Royal Society Open Science"

DOI: 10.1098/rsos.220466

Abstract: In this study, red mud (RM) was used as a support for LaFeO3 to prepare LaFeO3-RM via the ultrasonic-assisted sol–gel method for the removal of methylene blue (MB) assisted with bisulfite (BS) in the aqueous… read more here.

Keywords: red mud; bisulfite lafeo3; lafeo3; activation bisulfite ... See more keywords