Thickness and yttria percentage influences the fracture resistance of laminate veneer zirconia restorations
Sign Up to like & getrecommendations! Published in 2022 at "Clinical and Experimental Dental Research"
DOI: 10.1002/cre2.658
Abstract: Mechanical properties are cardinal for the long‐term clinical success of laminate veneer restorations but the selection of new restorative materials should ideally be based on clinical evidence, therefore, in vitro testing of dental materials is… read more here.
Keywords: fracture resistance; yttria percentage; laminate; laminate veneer ... See more keywords
An integrated optimization for laminate design and manufacturing of a CFRP wheel hub based on structural performance
Sign Up to like & getrecommendations! Published in 2018 at "Structural and Multidisciplinary Optimization"
DOI: 10.1007/s00158-017-1861-7
Abstract: An integrated optimization that comprehensively considers design and manufacturing factors such as the geometric appearance, laminate constitutions, laminate distribution, laminate thickness and stacking sequence, is proposed for designing a carbon fiber reinforced polymer wheel hub… read more here.
Keywords: wheel hub; optimization; design manufacturing; laminate ... See more keywords
Numerical analysis on the flow–compaction behavior and the effect of interface permeability in thick composite plates during autoclave processing
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science"
DOI: 10.1007/s10853-018-2660-2
Abstract: A multi-field coupled model was developed to simulate the flow–compaction behavior of thick composite laminates manufactured by the autoclave process based on Darcy’s law and the effective compaction stress theory. The model was verified by… read more here.
Keywords: permeability; flow compaction; compaction; laminate ... See more keywords
Effect of seawater immersion on the explosive blast response of a carbon fibre-polymer laminate
Sign Up to like & getrecommendations! Published in 2018 at "Composites Part A: Applied Science and Manufacturing"
DOI: 10.1016/j.compositesa.2018.03.027
Abstract: Abstract Explosions are an ever-present risk to laminates used in naval ships, submarines and offshore oil/gas platforms that are immersed in seawater. This study determines whether the absorption of water by a carbon fibre laminate… read more here.
Keywords: blast; seawater; explosive blast; laminate ... See more keywords
Dynamic analysis of bi-stable hybrid symmetric laminate
Sign Up to like & getrecommendations! Published in 2019 at "Composite Structures"
DOI: 10.1016/j.compstruct.2019.111158
Abstract: Abstract The resulting oscillation of bi-stable hybrid symmetric laminate could enable broadband energy harvesting via piezoelectric transduction. The aim of this work is to investigate its dynamic behaviors to provide the basis for designing broadband… read more here.
Keywords: hybrid symmetric; dynamic analysis; symmetric laminate; stable hybrid ... See more keywords
Concurrent topology and stacking sequence optimization of composite laminate plates using lamination parameters
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2021.114556
Abstract: Abstract Design engineers are constantly striving to minimize part weight, maximize stiffness, reduce cost, and optimize material usage. In this context, the use of composite materials provides an advantage when developing light-weight components because of… read more here.
Keywords: optimization; stacking sequence; topology; laminate ... See more keywords
Fatigue failure analysis of riveted fibre-metal laminate lap joints
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Fracture Mechanics"
DOI: 10.1016/j.engfracmech.2020.107275
Abstract: Abstract The fundamental aspects of fatigue fracture mechanisms (crack onset and propagation) in riveted single lap joints of fiber-metal laminate have been disclosed through extensive failure analysis of double-riveted 2/1 Glare™ laminate layup. Three fatigue… read more here.
Keywords: metal laminate; fracture; laminate; lap joints ... See more keywords
Mode-II total fatigue life model for unidirectional IM7/8552 carbon/epoxy composite laminate
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2016.09.014
Abstract: Abstract This paper presents a method of developing Total Fatigue Life Model (TFLM) for a unidirectional composite laminate with a delamination subjected to mode-II stress state. The model includes three domains of delamination growth rates:… read more here.
Keywords: im7 8552; carbon epoxy; iic; composite laminate ... See more keywords
Effects of spacing and ply blocking on the ballistic resistance of UHMWPE laminates
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Impact Engineering"
DOI: 10.1016/j.ijimpeng.2021.103824
Abstract: Abstract It is commonly claimed that ultra-high molecular weight polyethylene (UHMWPE) laminates offer high energy absorption during projectile impact with a cross-ply configuration. In this study, we explored alternative configurations with the aim of achieving… read more here.
Keywords: uhmwpe laminates; ballistic resistance; cross ply; laminate ... See more keywords
Highly tunable magnetoelectric response in dimensional gradient laminate composites of Fe-Ga alloy and Pb(Mg1/3Nb2/3)O3-Pb(Zr,Ti)O3 single crystal
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.05.122
Abstract: Abstract In this study, it is proposed and demonstrated that highly tunable magnetoelectric (ME) response can be achieved from magnetostrictive/piezoelectric laminate composites by integrating the effects of size variation and piezoelectric anisotropy. Tri-layered, rectangular ME… read more here.
Keywords: tunable magnetoelectric; magnetoelectric response; response; single crystal ... See more keywords
Fabrication of Al/Mg/Al laminate by a porthole die co-extrusion process
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2018.03.027
Abstract: Abstract A porthole die co-extrusion (PCE) process was proposed to fabricate the Al/Mg/Al laminate. The results showed that the laminate was successfully extruded without voids or cracks on the Al/Mg interface. The transition layer was… read more here.
Keywords: porthole die; process; die extrusion; laminate ... See more keywords