Effect of Post Weld Heat Treatment on Strength and Microstructure of Friction Stir Welded Lap Joints of AA2014-T6 Aluminum Alloy
Sign Up to like & getrecommendations! Published in 2019 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-019-00421-2
Abstract: Lap joints of AA2014 aluminum alloy produced by friction stir welding and subjected to post weld heat treatment have been studied. The shear strength and hardness of the welded joints were determined. The structure of… read more here.
Keywords: heat treatment; post weld; lap joints; weld heat ... See more keywords
Thermomechanical characterization of Nano-Fe3O4 reinforced thermoplastic adhesives and single lap-joints
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2019.107162
Abstract: Abstract In this work, Acrylonitrile Butadiene Styrene (ABS) was selected as the thermoplastic adhesive and reinforced with varying concentration of ferromagnetic nanoparticles (FMNP) through melt processing. The effect of FMNP content on thermo-mechanical properties was… read more here.
Keywords: lap joints; bonded joints; thermomechanical characterization; characterization nano ... See more keywords
Fatigue failure analysis of riveted fibre-metal laminate lap joints
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Fracture Mechanics"
DOI: 10.1016/j.engfracmech.2020.107275
Abstract: Abstract The fundamental aspects of fatigue fracture mechanisms (crack onset and propagation) in riveted single lap joints of fiber-metal laminate have been disclosed through extensive failure analysis of double-riveted 2/1 Glare™ laminate layup. Three fatigue… read more here.
Keywords: metal laminate; fracture; laminate; lap joints ... See more keywords
Three-parameter viscoelastic foundation model of adhesively bonded single-lap joints with functionally graded adherends
Sign Up to like & getrecommendations! Published in 2018 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2018.05.076
Abstract: Abstract Functionally graded (FG) adherends are beneficial to adhesively bonded joints, as different material composition through the adherend thickness can manipulate the interfacial stress distribution. It is a fact that both shear and peeling stresses… read more here.
Keywords: adhesively bonded; functionally graded; lap joints; model ... See more keywords
Comparison of shear strength and failure mechanisms of lap joint between REBCO tapes bonded by different joining techniques
Sign Up to like & getrecommendations! Published in 2018 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2018.04.101
Abstract: Abstract Lap joints between Rare-Earth Barium Copper Oxide (REBCO) tapes are intended to be employed for segmented fabrication of high-temperature superconducting magnet as innovative design of fusion magnets. This study evaluates the shear strength and… read more here.
Keywords: lap joints; rebco tapes; failure; shear strength ... See more keywords
Numerical study of similar and dissimilar single lap joints under quasi-static and impact conditions
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Adhesion and Adhesives"
DOI: 10.1016/j.ijadhadh.2019.102501
Abstract: Abstract Aiming to achieve the targets of reduction of fuel consumption and emissions, automotive manufacturers are increasingly using lightweight materials in the vehicle structures, namely, carbon fibre composites and aluminium alloys. The construction techniques for… read more here.
Keywords: quasi static; impact conditions; static impact; lap joints ... See more keywords
Modified pendulum hammer in impact tests of adhesive, riveted and hybrid lap joints
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Adhesion and Adhesives"
DOI: 10.1016/j.ijadhadh.2020.102734
Abstract: Abstract This paper presents a modified pendulum hammer adapted to test the impact strength of lap joints. The impact tests of lap specimens exhibited greater repeatability in terms of the results, compared with the tests… read more here.
Keywords: impact; impact tests; pendulum hammer; modified pendulum ... See more keywords
Finite difference model of wave motion for structural health monitoring of single lap joints
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Solids and Structures"
DOI: 10.1016/j.ijsolstr.2018.11.019
Abstract: Abstract This study is focused on the development of a finite difference model to simulate Lamb wave propagation through Single Lap Joints (SLJs). The main advantage of this model is the mathematical ability to easily… read more here.
Keywords: structural health; model; finite difference; lap joints ... See more keywords
Optimization of the tensile-shear strength of laser-welded lap joints of ultra-high strength abrasion resistance steel
Sign Up to like & getrecommendations! Published in 2021 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2021.01.121
Abstract: Abstract The tensile-shear strength of laser-welded lap joints developed in abrasion resistance ultra-high strength ARS-600 steel was optimized by evaluating the joints achieved with different welding parameters and various configurations of weld patterns, including multiple… read more here.
Keywords: tensile shear; strength laser; laser welded; strength ... See more keywords
Microstructure and softening of advanced high-strength steel QP1180 lap joints welded with CMT
Sign Up to like & getrecommendations! Published in 2021 at "Materials Letters"
DOI: 10.1016/j.matlet.2020.129282
Abstract: Abstract QP1180 lap joints are welded by the cold-metal-transfer method. The microstructure and softening of the welded joints are investigated. The results show that the fusion zone is composed of acicular ferrite and as hard… read more here.
Keywords: haz; microstructure softening; subcritical haz; joints welded ... See more keywords
Tensile and fatigue properties of laser-welded ultra-high-strength stainless spring steel lap joints
Sign Up to like & getrecommendations! Published in 2019 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2019.08.018
Abstract: Abstract The study was performed to investigate the usability of thin 0.3 mm thick ultra-high-strength stainless spring steel in laser-welded simple panel structures. The mechanical properties of the laser welded joints in lap-shear specimens were… read more here.
Keywords: strength; high strength; ultra high; laser welded ... See more keywords